ఓకిన్ మోడల్ JLDQ-11 & JLDQ.11.156.333 పవర్ రిక్లైనర్ మోటార్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

ముఖ్యమైన భద్రతా సమాచారం

Please ensure proper electrical safety when handling and installing the motor. Always disconnect power before servicing. Do not use outdoors or in wet environments. Consult a professional if you are unsure about installation or troubleshooting.

ఉత్పత్తి ముగిసిందిview

The Okin Refined-R Model: JLDQ.11.156.333 is an original Okin JLDQ motor designed for power recliners and electric lift chairs. This actuator motor set includes one motor and two connectors, facilitating both switch hand control and power supply connections.

అనుకూలత

Different actuator/motors are not compatible with every frame. The frame has strict demands for the actuator/motor's minimum install dimension, stroke, and plugs. This motor is suggested to replace OKIN model JLDQ.11.156.333, and can also replace JLDQ.11.156.333A/D/K/P/Z series. While there might be minor differences, these do not affect use. Always check your motor brand and model first to ensure proper fit and function.

సెటప్ మరియు ఇన్‌స్టాలేషన్

1. తయారీ: Ensure the recliner chair is unplugged from the power source. Carefully flip the chair over to access the underside mechanism.
2. Identify Old Motor: Locate the existing actuator motor. Note how it is mounted and connected.
3. వైరింగ్‌ను డిస్‌కనెక్ట్ చేయండి: Disconnect the 5-pin round plug for the hand control and the 2-pin square plug for the power supply from the old motor.
4. పాత మోటారును తొలగించండి: Unscrew or unbolt the old motor from the chair frame. Keep all hardware for reuse.
5. కొత్త మోటారును ఇన్‌స్టాల్ చేయండి: Position the new Okin JLDQ.11.156.333 motor in the same location as the old one. Secure it to the chair frame using the original bolts or appropriate hardware.
6. వైరింగ్ కనెక్ట్ చేయండి: Connect the 5-pin round plug for the hand control and the 2-pin square plug for the power supply to the new motor. Ensure connections are secure.
7. పరీక్ష కార్యాచరణ: Carefully return the chair to its upright position. Plug the chair back into a power source and test the reclining function using the hand control.

ఆపరేటింగ్ సూచనలు

The Okin JLDQ.11.156.333 motor operates in conjunction with your recliner's existing hand control. Simply press the appropriate buttons on your hand control to extend or retract the footrest and recline the chair. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating and ensure longevity.

నిర్వహణ

• శుభ్రపరచడం: Wipe clean with a dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• సాధారణ తనిఖీ: Periodically inspect the motor and its connections for any signs of wear, damage, or loose wiring.
• ద్రవాలను నివారించండి: Keep the motor and electrical components away from liquids to prevent damage and electrical hazards.

ట్రబుల్షూటింగ్

• మోటారు కదలడం లేదు: First, troubleshoot the switch and power supply. Ensure all plugs are securely connected and the power source is active.
• Partial Movement: Check for any obstructions in the recliner mechanism. Verify that the motor is correctly installed and not binding.
• అసాధారణ శబ్దాలు: Inspect the motor and its mounting for any loose parts or signs of friction. Ensure the motor is properly lubricated if applicable (consult manufacturer for specific lubrication guidelines).

సాంకేతిక లక్షణాలు

వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Ensure you have your model number (JLDQ.11.156.333) and any purchase details available when seeking support.