Enthuze ENT-TD6000

Enthuze ENT-TD6000 Jump Starter and Multifunction Power Bank Instruction Manual

1. పరిచయం మరియు ఓవర్view

The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.

ముఖ్య లక్షణాలు ఉన్నాయి:

  • Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
  • Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
  • మొబైల్ పవర్ సప్లై: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
  • LED లైట్ విధులు: Features multiple LED light modes for illumination and signaling.
Enthuze Jump Starter and Multifunction Power Bank with accessories

Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.

2. సెటప్ మరియు ప్రారంభ ఉపయోగం

2.1 పరికరాన్ని ఛార్జ్ చేస్తోంది

Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.

2.2 Connecting Jump Start Cables

To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.

Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.

3. ఆపరేటింగ్ సూచనలు

3.1 వాహనాన్ని జంప్ స్టార్ట్ చేయడం

  1. జంప్ స్టార్టర్ పూర్తిగా ఛార్జ్ చేయబడిందని నిర్ధారించుకోండి.
  2. స్మార్ట్ బ్యాటరీ clని కనెక్ట్ చేయండిamp to the jump starter.
  3. ఎరుపు (+) clని అటాచ్ చేయండిamp వాహనం యొక్క బ్యాటరీ యొక్క పాజిటివ్ టెర్మినల్‌కు.
  4. నలుపు (-) clని అటాచ్ చేయండిamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
  5. Press the switch button on the jump starter to activate the jump-start function.
  6. వాహనం యొక్క ఇంజిన్ను ప్రారంభించండి.
  7. వాహనం స్టార్ట్ అయిన తర్వాత, వెంటనే cl ని తీసివేయండి.amps from the vehicle battery, then disconnect the smart battery clamp జంప్ స్టార్టర్ నుండి.

This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.

3.2 ఎయిర్ కంప్రెసర్ ఉపయోగించడం

  1. Screw the air hose into the designated port on the jump starter.
  2. Connect the other end of the air hose to the tire valve or the item to be inflated.
  3. Use the '+' or '-' buttons to set the desired air pressure.
  4. Press and hold the switch button for 3 seconds to start the inflation process.
  5. The device will automatically stop when the set pressure is reached.
  6. Disconnect the air hose from the item and the jump starter.

3.3 పవర్ బ్యాంక్‌గా ఉపయోగించడం

The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:

  • USB అవుట్పుట్ 1: 5V=3A, 9V=2A, 12V=1.5A
  • USB అవుట్పుట్ 2: 5V=2.1A

Connect your device to the appropriate USB port using a compatible charging cable.

3.4 LED లైట్ ఫంక్షన్లు

The device includes multiple LED light modes:

  • స్థిరమైన కాంతి: సాధారణ ప్రకాశం కోసం.
  • SOS మోడ్: అత్యవసర సిగ్నలింగ్ కోసం.
  • స్ట్రోబ్ లైట్: For attracting attention.

విభిన్న మోడ్‌ల ద్వారా సైకిల్ చేయడానికి లైట్ బటన్‌ను నొక్కండి.

4. నిర్వహణ

To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:

  • రెగ్యులర్ ఛార్జింగ్: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
  • నిల్వ: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
  • శుభ్రపరచడం: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
  • కేబుల్ తనిఖీ: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Enthuze Jump Starter with accessories and warning labels

Figure 2: Product with accessories and important warnings.

5. ట్రబుల్షూటింగ్

సాధారణ సమస్యలు మరియు వాటి పరిష్కారాల కోసం క్రింది పట్టికను చూడండి:

ఎర్రర్ మెసేజ్కారణంపరిష్కారం
లోపంJumper cables connected with reversed polarity to the car battery.బ్యాటరీ clని కనెక్ట్ చేయండిamps to the correct positive and negative terminals.
తక్కువసరిగ్గా కనెక్ట్ చేయబడిన కారు బ్యాటరీ, కానీ బ్యాటరీ వాల్యూమ్tage is below 9V, and the core temperature is above 0°C/32°F.BOOST button for 2 seconds to use the forced boost function.
అవుట్ ఇన్High-temperature protection activated, displaying core temperature overheating.The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F.
INLow-temperature protection activated.The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F.
STARTBuzzer sounding, silence after 30 seconds.Overcurrent detected, stop starting vehicle, disappear for 30S.
STARTVehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash.Stop starting the vehicle and the safety mode disappears after 10 minutes.

6. స్పెసిఫికేషన్లు

Detailed technical specifications for the Enthuze ENT-TD6000:

పరామితివిలువ
ఉత్పత్తి పేరుఎయిర్ కంప్రెసర్‌తో జంప్ స్టార్టర్
మోడల్ENT-TD6000
పరిమాణం193 x 110 x 53 మిమీ
ద్రవ్యోల్బణం ఒత్తిడి పరిధి0.2-8బార్ / 3-120psi
ఆపరేటింగ్ ఉష్ణోగ్రతCharge: 0°C~45°C, Discharge: -10°C~45°C
నిల్వ ఉష్ణోగ్రత-10°C~50°C
Inflatable Hose Length435mm (including air nozzle)
బ్యాటరీ కెపాసిటీ41.44Wh (14.8V, 2.8Ah)
పని శబ్దం80 మీటర్ నుండి 1dB కంటే తక్కువ దూరంలో
ఛార్జింగ్ ఇన్‌పుట్5V=3A
ఛార్జింగ్ సమయంసుమారు 3.5 గంటలు
USB అవుట్పుట్ 15V=3A, 9V=2A, 12V=1.5A
USB అవుట్పుట్ 25V=2.1A
Air Pressure Sensor AccuracyPs 1psi
స్టార్ట్ కార్ వాల్యూమ్tage12V
Start Car Current500A (1000A Peak)
Table of basic parameters for Enthuze Jump Starter

Figure 3: Basic Parameters of the Enthuze ENT-TD6000.

7. ముఖ్యమైన భద్రతా హెచ్చరికలు

  • Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
  • Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
  • బాగా వెంటిలేషన్ ఉన్న ప్రదేశంలో మాత్రమే అంతర్గత బ్యాటరీని ఛార్జ్ చేయండి.
  • Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
  • వ్యక్తులకు గాయం ప్రమాదం. పవర్ కార్డ్ లేదా బ్యాటరీ కేబుల్స్ ఏదైనా విధంగా దెబ్బతిన్నట్లయితే ఈ ఉత్పత్తిని ఉపయోగించవద్దు.
  • ఈ పరికరం వాణిజ్య మరమ్మతు సదుపాయంలో ఉపయోగించడానికి ఉద్దేశించబడలేదు.
  • ఈ పరికరం ఉపయోగంలో లేనప్పుడు ఇంటి లోపల నిల్వ చేయడానికి ఉద్దేశించబడింది. ఈ పరికరం ఉపయోగించబడనప్పుడు నిల్వ చేయబడదు లేదా ఆరుబయట ఉంచబడదు.
  • ఈ పరికరం ఆరుబయట తాత్కాలిక ఉపయోగం కోసం ఉద్దేశించబడింది మరియు తడి పరిస్థితుల్లో ఈ పరికరాన్ని ఉపయోగిస్తున్నప్పుడు సహేతుకమైన జాగ్రత్తలు తీసుకోవాలి.

8. వారంటీ మరియు మద్దతు

For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.

సంబంధిత పత్రాలు - ENT-TD6000

ముందుగాview ENTHUZE Running Board Installation Instructions for 20-23 Gladiator
Detailed installation instructions for ENTHUZE Running Boards (Part# ENT22100DS) designed for the 20-23 Gladiator model. Includes parts list and step-by-step assembly guide.
ముందుగాview Enthuze Running Board Installation Instructions for 2021-2023 Ford Bronco 4-Door
Detailed installation guide for Enthuze running boards (part# ENT15020DS) for the 2021-2023 Ford Bronco 4-Door. Includes parts list and step-by-step assembly instructions.
ముందుగాview ENTHUZE Running Board Installation Instructions for Dodge Ram 1500 (2009-2023 Classic)
Detailed installation guide for ENTHUZE running boards (Part# ENT23400DS) designed for 2009-2018 and 2019-2023 Classic Dodge Ram 1500 Quad Cab models. Includes parts list and step-by-step instructions.
ముందుగాview Enthuze Running Board Installation Instructions for 2015-23 Chevy Colorado/GMC Canyon Crew Cab
Detailed installation guide for Enthuze running boards (part# ENT04500DS) designed for 2015-2023 Chevy Colorado and GMC Canyon Crew Cab models. Includes a comprehensive parts list and step-by-step instructions for proper mounting.
ముందుగాview Enthuze Running Boards Installation Instructions for 21-23 Ford Bronco 2 Door
Step-by-step installation guide for Enthuze running boards (part# ENT15030DS) designed for the 21-23 Ford Bronco 2 Door. Includes parts list and detailed procedure.
ముందుగాview Enthuze Running Board Installation Instructions for Silverado/Sierra 2019-2023
Detailed installation guide for Enthuze running boards (Part# ENT02310DS) on 2019-2023 Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 Double Cab models. Excludes 'LD' and 'Limited' trims.