Discovery Spark 607 AZ Telescope

పరిచయం

Welcome to the user manual for your new Discovery Spark 607 AZ Telescope. This manual provides essential information for the proper assembly, operation, maintenance, and care of your telescope. Please read these instructions carefully before using the product to ensure a safe and enjoyable experience. This telescope is designed for beginner amateur astronomers, suitable for observing lunar and terrestrial landscapes, as well as some planets and bright deep-sky objects.

ముఖ్యమైన భద్రతా సమాచారం

• Never look directly at the sun through the telescope or its finderscope without a professionally manufactured solar filter. అలా చేయడం వల్ల అంధత్వంతో సహా తక్షణ మరియు కోలుకోలేని కంటి నష్టం సంభవించవచ్చు.
• ముఖ్యంగా పిల్లలు ఉన్నప్పుడు టెలిస్కోప్‌ను పర్యవేక్షణ లేకుండా వదిలివేయవద్దు.
• గీతలు లేదా దెబ్బతినకుండా ఆప్టికల్ భాగాలను జాగ్రత్తగా నిర్వహించండి.
• త్రిపాద ఒరిగిపోకుండా ఉండటానికి సమతల ఉపరితలంపై స్థిరంగా ఉండేలా చూసుకోండి.

1 చేర్చబడిన భాగాలు

Your Discovery Spark 607 AZ Telescope set includes the following items:

• Telescope Optical Tube (Achromatic Refractor, 60mm Aperture, 700mm Focal Length)
• SR 4mm Eyepiece
• H 12.5mm Eyepiece
• H 20mm Eyepiece
• 1.5x Erect Image Eyepiece
• Optical Finderscope 5x24
• 90° Diagonal Mirror
• 3x బార్లో లెన్స్
• Alt-azimuth Mount
• Aluminum Tripod with an Accessory Tray
• "Space. Non-empty emptiness" Knowledge Book (Polish Edition)
• వినియోగదారు మాన్యువల్ మరియు వారంటీ కార్డ్

2. సెటప్ గైడ్

2.1 అన్‌ప్యాకింగ్

Carefully remove all components from the packaging. Keep the packaging materials for future storage or transport. Verify that all items listed in Section 1 are present.

2.2 Tripod Assembly

1. Spread the tripod legs outwards until they are fully extended and stable.
2. Adjust the height of the tripod legs to your desired viewing level by loosening the leg locks, extending the legs, and then tightening the locks securely.
3. Attach the accessory tray to the center brace of the tripod. This tray provides a convenient place to store eyepieces and other small accessories during observation.

2.3 Mount Attachment and Optical Tube Installation

1. The alt-azimuth mount is typically pre-attached to the tripod. Ensure it is securely fastened.
2. Locate the mounting screws or clamps on the alt-azimuth mount.
3. Carefully place the telescope optical tube onto the mount, aligning the mounting holes or clamps.
4. Secure the optical tube to the mount using the provided screws or clamps. Ensure it is firm and does not wobble.

2.4 Finderscope Installation and Alignment

1. Attach the 5x24 finderscope to its bracket on the telescope optical tube.
2. Secure the finderscope in place with the small screws on the bracket.
3. సమలేఖనం: Before observing, the finderscope must be aligned with the main telescope.
   • పగటిపూట ప్రధాన టెలిస్కోప్‌ను సుదూర, స్థిరమైన వస్తువు (ఉదా., సుదూర చెట్టు లేదా భవనం) వైపు చూపించండి.
   • Center the object in the main telescope's eyepiece (start with the H 20mm eyepiece for a wider field of view).
   • ఫైండర్‌స్కోప్‌ను పరిశీలించి, అదే వస్తువు ఫైండర్‌స్కోప్ యొక్క క్రాస్‌హైర్‌లలో కేంద్రీకృతమయ్యే వరకు దాని అలైన్‌మెంట్ స్క్రూలను సర్దుబాటు చేయండి.

2.5 Eyepiece and Diagonal Mirror Installation

1. Loosen the thumbscrew on the focuser drawtube.
2. Insert the 90° diagonal mirror into the focuser drawtube. Tighten the thumbscrew to secure it. The diagonal mirror provides a more comfortable viewing కోణం.
3. Loosen the thumbscrew on the diagonal mirror.
4. Insert your chosen eyepiece (e.g., H 20mm for lowest magnification) into the diagonal mirror. Tighten the thumbscrew to secure it.
5. To change eyepieces, simply loosen the thumbscrew, remove the current eyepiece, insert the new one, and tighten the thumbscrew.

2.6 Barlow Lens Usage

The 3x Barlow lens increases the magnification of any eyepiece by a factor of three. To use it:

1. Insert the Barlow lens into the diagonal mirror (after removing the eyepiece).
2. Then, insert your chosen eyepiece into the Barlow lens.
3. Secure both components with their respective thumbscrews.

Note: High magnifications can make images dimmer and more susceptible to atmospheric conditions. Start with lower magnifications for easier viewing.

3. ఆపరేటింగ్ సూచనలు

3.1 దృష్టి కేంద్రీకరించడం

Once an object is centered in the eyepiece, turn the focuser knob slowly until the image appears sharp and clear. Fine-tune the focus as needed, especially when changing eyepieces or observing different objects.

3.2 Aiming the Telescope (Alt-Azimuth Mount)

The alt-azimuth mount allows movement in two axes: altitude (up and down) and azimuth (left and right). Loosen the lock knob on the vertical axis to adjust the altitude. Gently move the telescope horizontally to adjust the azimuth. Use the aligned finderscope to quickly locate objects, then fine-tune with the main telescope.

3.3 ఖగోళ వస్తువులను పరిశీలించడం

• చంద్రుడు: The Moon is an excellent first target. Its craters and features are easily visible even with low magnification.
• గ్రహాలు: Bright planets like Jupiter and Saturn can be observed. You may see Jupiter's four largest moons and Saturn's rings under good conditions.
• Deep-Sky Objects: Brighter deep-sky objects such as star clusters (e.g., Pleiades) and some nebulae can be viewed from dark-sky locations.

3.4 Terrestrial Observation

For observing objects on Earth, use the 1.5x erect image eyepiece. This eyepiece corrects the inverted image typically produced by astronomical telescopes, making it suitable for land viewing. Simply insert it into the diagonal mirror in place of a standard eyepiece.

4. నిర్వహణ మరియు సంరక్షణ

• క్లీనింగ్ ఆప్టిక్స్: Use a soft, clean brush to remove dust from lenses. For smudges, use a specialized optical cleaning solution and a microfiber cloth. Apply solution to the cloth, not directly to the lens. Avoid touching optical surfaces with bare hands.
• Cleaning Non-Optical Surfaces: Wipe the telescope tube and tripod with a soft, damp గుడ్డ.
• నిల్వ: Store the telescope in a dry, dust-free environment. If possible, keep it in its original packaging or a dedicated telescope case. Avoid extreme temperatures and humidity.
• సాధారణ సంరక్షణ: Do not overtighten screws or knobs. Regularly check for loose parts and tighten them if necessary.

5. ట్రబుల్షూటింగ్

6. స్పెసిఫికేషన్లు

7. వారంటీ మరియు మద్దతు

This Discovery Spark 607 AZ Telescope comes with a manufacturer's warranty of 10 సంవత్సరాలు. Please refer to the included warranty card for detailed terms and conditions.

For technical support, service, or warranty claims, please contact Discovery customer service through their official webసైట్ లేదా మీ వారంటీ కార్డ్‌లో అందించిన సంప్రదింపు సమాచారం.