పార్క్‌సైడ్ PDOS 200 C2 డబుల్ గ్రైండర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. ఉత్పత్తి ముగిసిందిview

The Parkside PDOS 200 C2 Double Grinder is a versatile power tool designed for grinding, sharpening, deburring, and derusting various metal and steel workpieces. It features a quiet, maintenance-free induction motor and two grinding wheels for both coarse and fine applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

చిత్రం 1.1: The Parkside PDOS 200 C2 Double Grinder. This image shows the complete unit from a slight angle, highlighting its two grinding wheels, protective covers, and the central motor housing with the power switch.

2. భద్రతా సూచనలు

విద్యుత్ షాక్, అగ్నిప్రమాదం మరియు తీవ్రమైన గాయాన్ని నివారించడానికి క్రింది భద్రతా జాగ్రత్తలను ఎల్లప్పుడూ గమనించండి.

• మాన్యువల్ చదవండి: Before operating the grinder, read and understand all instructions and safety warnings.
• వ్యక్తిగత రక్షణ పరికరాలు (PPE): Always wear safety glasses or a face shield, hearing protection, and appropriate work gloves.
• పని ప్రాంతం: Keep the work area clean, well-lit, and free from clutter. Ensure adequate ventilation.
• విద్యుత్ భద్రత: Ensure the power supply matches the grinder's specifications. Do not operate in damp లేదా తడి పరిస్థితులు.
• సురక్షిత వర్క్‌పీస్: Always hold the workpiece firmly against the work rest.
• Maintain Guards: Never operate the grinder without the protective covers and spark guards properly installed and adjusted.
• అతిగా చేరడం మానుకోండి: అన్ని సమయాల్లో సరైన అడుగు మరియు సమతుల్యతను నిర్వహించండి.
• ఉపయోగంలో లేనప్పుడు అన్‌ప్లగ్ చేయండి: Disconnect the grinder from the power supply before making adjustments, changing accessories, or when not in use.
• ఉపయోగం ముందు తనిఖీ చేయండి: Check for damaged parts, misalignment, or any condition that may affect operation.

3. ప్యాకేజీ విషయాలు

Carefully unpack all items and check for completeness. If any parts are missing or damaged, contact customer support.

• Parkside PDOS 200 C2 Double Grinder unit
• 1x Coarse grinding wheel (Grit 36)
• 1x Fine grinding wheel (Grit 80)
• 2x Spark protection glasses
• 2x Work rests
• Mounting hardware (if applicable for bench mounting)
• ఇన్స్ట్రక్షన్ మాన్యువల్

4. సెటప్

4.1 Bench Mounting

For stable and safe operation, the double grinder should be securely mounted to a workbench. Use appropriate bolts and nuts (not always included) to fasten the grinder through the mounting holes in its base.

4.2 Installing Spark Protection Glasses and Work Rests

1. Attach the spark protection glasses to the designated brackets above each grinding wheel. Ensure they are securely fastened and positioned to protect your eyes from sparks and debris.
2. Install the work rests in front of each grinding wheel. Adjust their position so that the gap between the work rest and the grinding wheel is no more than 2 mm. This gap should be maintained as the wheel wears down. The work rests are tool-free adjustable.

చిత్రం 4.1: ముందు view of the grinder, showing the spark protection glasses and adjustable work rests in position. The image also depicts sparks generated during grinding, illustrating the function of the protective elements.

4.3 పవర్ కనెక్షన్

Connect the power cable to a suitable electrical outlet. Ensure the power switch is in the "OFF" position before plugging in the unit.

5. ఆపరేటింగ్ సూచనలు

5.1 ఆన్/ఆఫ్ చేయడం

• To turn on the grinder, press the dust-protected ON (I) switch.
• To turn off the grinder, press the OFF (O) switch.
• Allow the grinding wheels to reach full speed before beginning work.

5.2 గ్రైండింగ్ టెక్నిక్స్

The PDOS 200 C2 features two grinding wheels:

• Coarse Grinding Wheel (Grit 36): Use for rapid material removal, shaping, and initial sharpening of dull tools.
• Fine Grinding Wheel (Grit 80): Use for finishing, fine sharpening, and deburring.

When grinding:

1. Always wear appropriate PPE.
2. Hold the workpiece firmly against the work rest.
3. Apply light, even pressure. Excessive pressure can damage the wheel or motor.
4. Move the workpiece across the face of the wheel to ensure even wear.
5. Avoid grinding on the side of the wheel, as this can cause the wheel to break.
6. For sharpening, maintain a consistent angle against the wheel.
7. Allow the workpiece to cool periodically to prevent overheating and damage to the material.

6. నిర్వహణ

Regular maintenance ensures the longevity and safe operation of your grinder.

• శుభ్రపరచడం: Disconnect from power. Use a brush or compressed air to remove dust and debris from the motor housing and around the wheels.
• చక్రాల తనిఖీ: Regularly inspect grinding wheels for cracks, chips, or excessive wear. Replace damaged or worn wheels immediately.
• Work Rest Adjustment: Ensure the gap between the work rest and the grinding wheel remains at a maximum of 2 mm. Adjust as the wheel wears.
• Spark Guard Inspection: Check spark protection glasses for cracks or excessive scratching that may impair visibility. Replace if necessary.
• మోటార్: The induction motor is maintenance-free and does not require lubrication.

7. ట్రబుల్షూటింగ్

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer's customer service department.

వారంటీ ప్రయోజనాల కోసం కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.