పరిచయం
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Sanus Height-Adjustable Speaker Stands, specifically designed for the Sonos Era 100 speakers. These stands offer 17 inches of height adjustment, integrated cable management, and a durable design to optimize your audio experience and complement your home aesthetics.
ప్యాకేజీ విషయాలు
దయచేసి అసెంబ్లీని ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి.
- Base (2 units)
- Pillar (2 units)
- Speaker Brackets (2 units)
- Hardware Kit (screws, rubber feet, carpet spikes)
- కేబుల్ నిర్వహణ క్లిప్లు
- ఇన్స్ట్రక్షన్ మాన్యువల్
అవసరమైన సాధనాలు
- ఫిలిప్స్ స్క్రూడ్రైవర్
సెటప్ మరియు ఇన్స్టాలేషన్
Follow these steps for a quick and easy assembly. A Phillips screwdriver is required.
Step 1: Route Power Cord Through Base and Pillar
Begin by routing the power cord for your Sonos Era 100 speaker through the designated channel in the stand's base and up through the pillar. This ensures a clean, concealed cable path.
A hand guides the speaker's power cord through the internal channel of the stand's pillar, demonstrating the integrated cable management feature.
Step 2: Attach Pillar to Base
Securely attach the pillar to the base using the provided screws and a Phillips screwdriver. Ensure the pillar is firmly seated in the base for stability.
A close-up of a hand using a Phillips screwdriver to fasten the pillar to the base of the speaker stand, part of the 15-minute assembly process.
దశ 3: టాప్ బ్రాకెట్ని అటాచ్ చేయండి
Attach the top bracket to the upper section of the pillar. This bracket will hold your Sonos Era 100 speaker.
A hand positions the top bracket onto the speaker stand's pillar, preparing for speaker attachment.
Step 4: Install Speaker Bracket to Speaker
Install the dedicated speaker bracket onto the bottom of your Sonos Era 100 speaker. This bracket ensures a secure fit to the stand.
A hand uses a Phillips screwdriver to secure the speaker bracket to the base of the Sonos Era 100 speaker.
Step 5: Connect Power to Speaker
Connect the power cable to your Sonos Era 100 speaker before placing it on the stand. Ensure the cable is properly routed through the stand's internal channels.
Step 6: Slide Speaker onto Top Bracket
Carefully slide your Sonos Era 100 speaker, with the attached bracket, onto the top bracket of the stand. Ensure it clicks into place for a secure connection.
Step 7: Attach with Securement Screw
Use the securement screw to firmly attach the speaker to the top bracket, preventing accidental dislodgement.
దశ 8: సురక్షిత కేబుల్స్
Utilize the provided cable management clips to secure any excess power cord along the back of the stand's pillar. This maintains a clean and organized appearance.
A hand presses the power cord into the cable management channel on the back of the stand, ensuring a tidy setup.
దశ 9: ఎత్తును సర్దుబాటు చేయండి
The stand offers 17 inches of tool-free height adjustment, allowing you to position your Sonos Era 100 speaker between 25 and 42 inches from the floor. To adjust, locate the height adjustment mechanism on the pillar, press the release button, and slide the upper section to your desired height. Release the button to lock it in place.
A visual representation of the stand's adjustable height feature, demonstrating the range from 25 inches to 42 inches.
ఆపరేటింగ్ సూచనలు
Once assembled and your Sonos Era 100 speaker is securely mounted, ensure the speaker is connected to a power source and configured according to Sonos's instructions. The stand itself does not require any operational steps beyond initial setup and height adjustment.
నిర్వహణ
- శుభ్రపరచడం: Use a soft, dry cloth to wipe down the stand. Avoid abrasive cleaners or solvents that may damage the finish.
- స్థిరత్వ తనిఖీ: అన్ని స్క్రూలు మరియు కనెక్షన్లు బిగుతుగా మరియు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోవడానికి కాలానుగుణంగా వాటిని తనిఖీ చేయండి.
- కేబుల్ నిర్వహణ: Ensure cables remain neatly tucked into the management channels to prevent damage or tripping hazards.
ట్రబుల్షూటింగ్
- స్టాండ్ వొబుల్స్: Ensure all screws are tightened. Verify the stand is placed on a flat, stable surface. Use the included rubber feet for hard floors or carpet spikes for carpeted areas to enhance stability.
- ఎత్తు సర్దుబాటు చేయడంలో ఇబ్బంది: Ensure the release button is fully pressed when attempting to adjust the pillar height. Do not force the adjustment.
- Cables Not Concealed: Re-route the power cord through the internal channels and use the cable management clips as instructed.
The stand's base is equipped with interchangeable rubber feet for hard surfaces and carpet spikes for carpeted floors, ensuring optimal stability.
స్పెసిఫికేషన్లు
| బ్రాండ్ | సానుస్ |
| మోడల్ అనుకూలత | Sonos Era 100 |
| మెటీరియల్ | మిశ్రమం ఉక్కు |
| సర్దుబాటు ఎత్తు పరిధి | 17 inches (from 25 to 42 inches) |
| గరిష్ట ఎత్తు | 42.74 అంగుళాలు (108.6 సెం.మీ.) |
| Base Dimensions (Approx.) | 10.9 inches (width) x 11 inches (depth) |
| వస్తువు బరువు (స్టాండ్కు) | Approximately 11.5 pounds (23 pounds for the pair) |
| రంగు | నలుపు |
A technical drawing illustrating the full dimensions of the speaker stand, including its maximum height of 42.74 inches and base measurements.
వారంటీ సమాచారం
Sanus products are backed by a 5-year limited warranty. For specific details regarding your warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Sanus webసైట్.
A badge highlighting the 5-year limited warranty provided with the product.
కస్టమర్ మద్దతు
Should you have any questions, require assistance with assembly, or encounter any issues, our customer care team is available to help.
- ఫోన్: 1-800-359-5520
- లభ్యత: వారానికి 7 రోజులు
An instructional video demonstrating the assembly and features of the Sanus Height-Adjustable Speaker Stand for Sonos Era 100, including contact information for customer support.
