AeroCool Mirage L240 ARGB Liquid Cooler User Manual

పరిచయం

The AeroCool Mirage L240 ARGB Liquid Cooler is a high-performance all-in-one (AIO) liquid cooling solution designed for efficient heat dissipation from your CPU. Featuring a 240mm radiator, two 120mm Addressable RGB (ARGB) fans, and a unique infinity mirror pump design, it provides both superior cooling capabilities and stunning visual effects for your PC build. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.

Figure 1: AeroCool Mirage L240 ARGB Liquid Cooler with its vibrant ARGB fans and pump.

పెట్టెలో ఏముంది

దయచేసి ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి.

• AeroCool Mirage L240 ARGB Liquid Cooler (Radiator, Pump, and Tubing pre-assembled)
• 2 x 120mm ARGB అభిమానులు
• Mounting Hardware Kit (for Intel and AMD sockets)
• ఫ్యాన్ మరియు రేడియేటర్ మౌంటు స్క్రూలు
• థర్మల్ పేస్ట్ (ముందుగా అప్లై చేయబడినది లేదా ట్యూబ్‌లో)
• ARGB Controller (if not motherboard sync compatible)
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

Note: The provided product information only listed "Camera body" for "whats_in_the_box". This is a generic list for a liquid cooler.

స్పెసిఫికేషన్లు

సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps carefully to install your AeroCool Mirage L240 ARGB Liquid Cooler.

1. మీ వ్యవస్థను సిద్ధం చేయండి

• మీ కంప్యూటర్‌ను పవర్ ఆఫ్ చేసి, వాల్ అవుట్‌లెట్ నుండి దాన్ని అన్‌ప్లగ్ చేయండి.
• Open your PC case and remove any existing CPU cooler.
• Clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.

2. రేడియేటర్ మరియు ఫ్యాన్లను ఇన్‌స్టాల్ చేయండి

1. Attach the two 120mm ARGB fans to the radiator using the long fan screws provided. Ensure the fan airflow direction is as desired (typically exhaust out of the case or intake into the case).
2. Mount the radiator assembly to an available 240mm fan mount location in your PC case (e.g., top, front, or rear). Use the shorter radiator screws to secure it.

Figure 2: Radiator and fans assembled, ready for mounting in the PC case.

3. Install CPU Pump/Cold Plate

1. Select the appropriate mounting brackets for your CPU socket (Intel or AMD) from the hardware kit. Attach them to the pump unit.
2. If thermal paste is not pre-applied, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS).
3. Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes.
4. Secure the pump to the motherboard using the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Figure 3: The copper cold plate of the pump unit, which makes contact with the CPU.

4. కేబుల్స్ కనెక్ట్ చేయండి

• Connect the pump's 3-pin power cable to the "CPU_FAN" or "AIO_PUMP" header on your motherboard.
• Connect each fan's 4-pin PWM cable to available fan headers on your motherboard (e.g., "SYS_FAN").
• Connect the ARGB cables from the fans and pump to your motherboard's 3-pin 5V ARGB header or to the included ARGB controller. Ensure correct polarity to avoid damage.
• Organize cables for good airflow and aesthetics.

ఆపరేటింగ్ సూచనలు

Once installed, the AeroCool Mirage L240 ARGB Liquid Cooler operates automatically based on your motherboard's fan control settings. The pump runs continuously to circulate coolant, and fan speeds adjust according to CPU temperature.

ARGB లైటింగ్ నియంత్రణ

• మదర్‌బోర్డ్ సమకాలీకరణ: If connected to a compatible motherboard ARGB header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
• ARGB Controller: If using the included ARGB controller (if applicable), refer to its specific instructions for changing lighting modes, colors, and brightness.

నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ లిక్విడ్ కూలర్ యొక్క దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారించడంలో సహాయపడుతుంది.

• దుమ్ము శుభ్రపరచడం: Periodically (every 3-6 months, or more often in dusty environments) power off your PC and use compressed air to clean dust from the radiator fins and fan blades. This prevents airflow restriction and maintains cooling efficiency.
• దృశ్య తనిఖీ: Check the tubing and connections for any signs of leaks or damage. While rare, early detection can prevent issues.
• ఫ్యాన్ ఆపరేషన్: Ensure all fans are spinning freely and quietly. Replace any fans that become noisy or stop working.

Figure 4: Regularly clean dust from the radiator and fan blades for optimal performance.

ట్రబుల్షూటింగ్

If you encounter issues with your AeroCool Mirage L240 ARGB Liquid Cooler, refer to the following common problems and solutions.

వారంటీ మరియు మద్దతు

AeroCool products are designed for reliability and performance. For warranty information, technical support, or to inquire about replacement parts, please visit the official AeroCool webసైట్ లేదా వారి కస్టమర్ సేవా విభాగాన్ని సంప్రదించండి.

అధికారిక Webసైట్: www.aerocool.io

Please have your product model number (MIRAGEL240W or ACLA-MR2412771) and purchase date ready when contacting support.