సంతృప్తి వైర్‌లెస్ డోర్‌బెల్ ఎక్స్‌టెండర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. పరిచయం

The Satisure Wireless Doorbell Extender with Receiver is designed to seamlessly upgrade your existing hardwired doorbell system to a convenient wireless setup. This allows you to extend the reach of your doorbell chime, ensuring you hear visitors from anywhere in your home, garage, or backyard.

Key features include a wide coverage range of up to 656 feet (200 meters in open areas), 58 selectable chimes, and 5 adjustable volume levels (0-110dB). The system is easy to install and compatible with various wired doorbell types.

2. ఉత్పత్తి భాగాలు

Your Satisure Wireless Doorbell Extender package includes the following main components:

• Wireless Doorbell Receiver (Chime Unit): This unit plugs into a standard electrical outlet and produces the audible chime. It features volume and music selection buttons, along with an LED indicator.
• Wireless Doorbell Extender (Transmitter Unit): This small module connects to your existing wired doorbell system and transmits the signal wirelessly to the receiver. It has wires for connection and an antenna.

3. సెటప్ & ఇన్‌స్టాలేషన్

Follow these steps to install your Satisure Wireless Doorbell Extender:

3.1 ట్రాన్స్‌మిటర్ ఇన్‌స్టాలేషన్

1. Open the Doorbell Cover: Locate your existing wired doorbell chime box and carefully open its cover.
2. Connect the Radio Transmitter: Connect the two wires from the wireless doorbell extender (transmitter) to the terminals of your existing wired doorbell. There is no distinction between positive (+) and negative (-) poles for this connection. The voltage limit is 3-24V.
3. కనెక్షన్‌ని ధృవీకరించండి: Once connected, the LED on the transmitter will light up, and the receiver should ring, indicating a successful connection.
4. Secure the Transmitter: Secure the transmitter module inside the doorbell control box, ideally with tape, to prevent it from loosening.

3.2 Pairing the Receiver and Extender

To ensure your receiver and extender communicate correctly, they need to be paired:

1. Plug the receiver into an electrical outlet.
2. On the receiver, short press the music up or down buttons to select your desired chime.
3. Press and hold the volume button for approximately 5-7 seconds until the receiver emits a 'ding' sound and its indicator light flashes rapidly. This puts the receiver into pairing mode.
4. While the receiver is in pairing mode, press your existing wired doorbell button. The indicator light on the transmitter will light up red, signaling that it's sending a signal.
5. When you hear the selected chime from the receiver, the pairing operation is successful.

4. ఆపరేటింగ్ సూచనలు

4.1 Selecting Chimes and Adjusting Volume

• చైమ్ ఎంపిక: The receiver offers 58 different chimes. Use the 'Up' and 'Down' music buttons on the side of the receiver to cycle through the available melodies.
• వాల్యూమ్ సర్దుబాటు: The receiver has 5 volume levels, ranging from 0dB (silent) to 110dB. Press the 'Volume' button on the side of the receiver to adjust the volume to your preferred level.

4.2 LED Night Light Feature

The receiver is equipped with a blue LED light that can serve as a night light. This surface LED light can also indicate when the door is open, even if the chime is set to silent mode or at night, providing a visual alert.

5. నిర్వహణ

To ensure the longevity and optimal performance of your Satisure Wireless Doorbell Extender, follow these simple maintenance guidelines:

• శుభ్రపరచడం: Wipe the exterior of the receiver and transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• ప్లేస్‌మెంట్: Ensure the receiver is plugged into a stable outlet and not in a location where it could be easily knocked or damaged. The transmitter should remain securely fastened within the doorbell chime box.
• పర్యావరణ పరిస్థితులు: While the system is designed for home use, avoid exposing the components to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

6. ట్రబుల్షూటింగ్

If you encounter issues with your Satisure Wireless Doorbell Extender, please refer to the following common troubleshooting tips:

• Chime Not Working Properly: If the receiver does not chime when the doorbell button is pressed, the issue might not be with the extender itself. Check your existing doorbell button, transformer, and wiring for any faults. Ensure the transmitter's LED lights up when the doorbell is pressed.
• రిసీవర్ నుండి శబ్దం లేదు: Verify that the receiver is properly plugged into a working electrical outlet. Check the volume level on the receiver to ensure it's not set to 0dB (silent mode).
• జత చేయడం సమస్యలు: If the receiver and transmitter are not pairing, ensure both units are within range and follow the pairing instructions (Section 3.2) carefully. Sometimes, repeating the pairing process can resolve the issue.
• తగ్గించిన పరిధి: The specified range of 656 feet is for open areas. Obstacles such as thick walls, metal structures, or other electronic devices can interfere with the wireless signal and reduce the effective range. Try repositioning the receiver to a more central location or closer to the transmitter.

For more detailed troubleshooting steps or persistent issues, please contact Satisure customer support.

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

Satisure is committed to providing excellent customer service and product satisfaction. Your purchase is backed by:

• 30-రోజుల వాపసు హామీ: If you are not completely satisfied with your product, you may be eligible for a refund within 30 days of purchase.
• Dedicated After-Sales Service Team: For any questions, concerns, or assistance with your Satisure Wireless Doorbell Extender, please do not hesitate to reach out to our dedicated support team. We are here to help ensure your peace of mind.

Please refer to your purchase documentation or the Satisure official website for contact information and further details regarding warranty claims and support.