Hyper 24V Go Kart Ride On

Hyper Toys 24V Go Kart Ride On User Manual

Model: 24V Go Kart Ride On

బ్రాండ్: హైపర్

1. భద్రతా సమాచారం

Read and understand all instructions before operating the Hyper Toys 24V Go Kart Ride On. Failure to follow safety guidelines may result in serious injury.

  • పెద్దల పర్యవేక్షణ అవసరం: This product is intended for use under direct adult supervision.
  • రక్షణ పరికరాలు: Always wear a helmet and appropriate safety gear (e.g., knee pads, elbow pads) when operating the Go Kart.
  • బరువు పరిమితి: Do not exceed the maximum rider weight of 154 పౌండ్లు (70 కిలోలు).
  • ఆపరేటింగ్ ఉపరితలం: Operate the Go Kart only on hard, flat, dry surfaces. Avoid loose dirt, sand, gravel, steep inclines, or wet conditions.
  • క్లియర్ ఏరియా: Ensure the operating area is free from obstacles, traffic, and other hazards.
  • బ్యాటరీ భద్రత: Handle the battery according to instructions. Do not modify or expose to extreme temperatures.
  • No Passengers: This Go Kart is designed for a single rider only.
Child wearing a helmet and driving the green Hyper Toys 24V Go Kart Ride On
Image 1.1: A child safely operating the Hyper Toys 24V Go Kart Ride On with a helmet.

2. ఉత్పత్తి ముగిసిందిview

The Hyper Toys 24V Go Kart Ride On is an electric vehicle designed for recreational use on appropriate surfaces. It features multiple speed settings and a drift driving mode for an engaging experience.

ముఖ్య లక్షణాలు:

  • సులభమైన పుష్-బటన్ ఆపరేషన్
  • Forward low speed: 5 mph
  • Reverse speed: 5 mph
  • Forward maximum speed: 9 mph
  • Drift driving mode
  • Realistic racing-style steering wheel
  • Durable construction with a racing bucket seat
Graphic illustrating the 24 Volt Hyper Drift-Kart features including battery power, low speed, reverse speed, and max speed
చిత్రం 2.1: ముగిసిందిview of the Hyper Drift-Kart's power and speed capabilities.
Child riding the green Hyper Go Kart, highlighting drift driving mode, multi-speed settings, realistic steering wheel, and 154 lbs max rider weight
Image 2.2: Visual representation of key operational features and rider specifications.

3. అసెంబ్లీ సూచనలు

The Hyper Toys 24V Go Kart requires some assembly before first use. Please follow these general steps. Refer to the detailed assembly manual included in the product packaging for specific diagrams and instructions.

అవసరమైన సాధనాలు:

  • Wrench (size may vary)
  • స్క్రూడ్రైవర్ (ఫిలిప్స్ హెడ్)

అసెంబ్లీ దశలు:

  1. భాగాలను అన్‌ప్యాక్ చేయండి: ప్యాకేజింగ్ నుండి అన్ని భాగాలను జాగ్రత్తగా తీసివేసి, మీ మాన్యువల్‌లోని భాగాల జాబితాతో సరిచూసుకోండి.
  2. Attach Front Wheels: Securely attach the front wheels to the axle using the provided hardware.
  3. వెనుక చక్రాలను అటాచ్ చేయండి: Securely attach the rear wheels to the drive axle.
  4. Install Steering Column: Insert the steering column and connect it to the steering mechanism.
  5. మౌంట్ సీటు: Attach the racing bucket seat to the Go Kart frame.
  6. బ్యాటరీని కనెక్ట్ చేయండి: Locate the battery compartment, typically under the seat or chassis. Connect the battery terminals as instructed. Ensure connections are secure.
  7. చివరి తనిఖీలు: Before first use, ensure all bolts, nuts, and connections are tight and secure.
బహుళ views of the Hyper Toys 24V Go Kart Ride On from different angles
Image 3.1: Various perspectives of the Go Kart, useful for assembly reference.

4. Operating the Go Kart

Familiarize yourself with the controls before operating the Go Kart.

నియంత్రణలు:

  • పవర్ బటన్: Located on the dashboard or near the steering wheel. Press to turn the Go Kart on or off.
  • యాక్సిలరేటర్ పెడల్: Located on the right footrest. Press to move forward.
  • బ్రేక్ పెడల్: Located on the left footrest. Press to slow down or stop.
  • స్పీడ్ సెలెక్టర్: A switch or button to select between low speed (5 mph), reverse (5 mph), and maximum speed (9 mph).
  • Drift Mode Switch: Activates the drift function, typically affecting the rear wheels for controlled sliding.

Starting and Driving:

  1. Ensure the Go Kart is fully charged.
  2. Sit securely in the racing bucket seat.
  3. Press the power button to turn on the Go Kart.
  4. Select your desired speed setting (low, reverse, or max).
  5. Gently press the accelerator pedal to begin moving.
  6. దిశను నియంత్రించడానికి స్టీరింగ్ వీల్‌ని ఉపయోగించండి.
  7. To activate drift mode, engage the drift mode switch while driving. This mode is best used on smooth, hard surfaces.
  8. To stop, release the accelerator and press the brake pedal.
క్లోజ్-అప్ view of the Hyper Go Kart's racing bucket seat, steering wheel, and EVA soft slick wheels
Image 4.1: Details of the Go Kart's cockpit and wheel design.

5. నిర్వహణ మరియు సంరక్షణ

Regular maintenance ensures the longevity and safe operation of your Go Kart.

బ్యాటరీ ఛార్జింగ్:

  • The Go Kart uses 1 Lithium Ion battery (included).
  • Always use the charger provided with the Go Kart.
  • Charge the battery fully before first use (typically 8-12 hours).
  • బ్యాటరీని ఎక్కువగా ఛార్జ్ చేయవద్దు. ఛార్జింగ్ పూర్తయిన తర్వాత ఛార్జర్‌ను డిస్‌కనెక్ట్ చేయండి.
  • Charge the battery after each use, even if only for a short period, to maintain battery health.
  • If storing the Go Kart for an extended period, charge the battery monthly.

శుభ్రపరచడం:

  • Wipe down the Go Kart with a damp ప్రతి ఉపయోగం తర్వాత వస్త్రం.
  • కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్లను ఉపయోగించడం మానుకోండి.
  • విద్యుత్ భాగాలపై నేరుగా నీటిని పిచికారీ చేయవద్దు.

నిల్వ:

  • Store the Go Kart in a dry, cool place away from direct sunlight and moisture.
  • Protect the Go Kart from extreme temperatures.

చక్రాల సంరక్షణ:

  • The Go Kart is designed for hard surfaces. Avoid rough terrain or surfaces that may cause excessive wear to the wheels.
  • Periodically inspect wheels for wear and tear.

6. ట్రబుల్షూటింగ్

If you encounter issues with your Go Kart, refer to the following common problems and solutions.

సమస్యసాధ్యమైన కారణంపరిష్కారం
Go Kart does not moveBattery not charged; Battery connection loose; Power switch off; Motor issueCharge battery fully; Check battery terminals for secure connection; Ensure power switch is ON; Inspect motor and wiring (contact support if needed).
తగ్గిన వేగం లేదా శక్తిLow battery charge; Overload (exceeding weight limit); Operating on unsuitable surfaceRecharge battery; Ensure rider is within weight limit; Operate on hard, flat surfaces.
Go Kart makes unusual noisesLoose parts; Debris in wheels/motor; Worn componentsInspect for loose parts and tighten; Clear any debris; Contact support for worn component assessment.
Steering is difficult or unresponsiveSteering mechanism obstruction; Loose steering componentsCheck for obstructions; Inspect and tighten steering connections.

If troubleshooting steps do not resolve the issue, please contact Hyper Toys customer support.

7. స్పెసిఫికేషన్లు

Detailed specifications for the Hyper Toys 24V Go Kart Ride On.

ఫీచర్వివరాలు
ఉత్పత్తి కొలతలు46 x 11.5 x 23 అంగుళాలు (117 x 29 x 58 సెం.మీ.)
వస్తువు బరువు56 పౌండ్లు (25.4 కిలోలు)
బ్యాటరీ1 Lithium Ion battery (included), 2 x 12V7AH - 24V Parallel
మోటార్Dual 200W Motor 2500RPM (2 Wheel Drive)
గరిష్ట రైడర్ బరువు154 పౌండ్లు (70 కిలోలు)
Max User Height150 సెం.మీ / 59 అంగుళాలు
Foot Pedal to Back of Seat Distance68 సెం.మీ / 26.7 అంగుళాలు
వేగంForward Low: 5 mph, Reverse: 5 mph, Forward Max: 9 mph
ఆపరేటింగ్ ఉపరితలంHard surfaces only
Graphic detailing Go Kart specifications including battery, drive, foot pedal distance, max user height, and max user weight
Image 7.1: Visual summary of the Go Kart's technical specifications.
Diagram showing the dimensions of the Hyper Toys 24V Go Kart Ride On: 46 inches long, 23 inches wide, and 11.5 inches high
Image 7.2: Product dimensions for the Hyper Toys 24V Go Kart Ride On.

8. వారంటీ మరియు మద్దతు

Hyper Toy Co is committed to providing high-quality products. This product comes with a standard manufacturer's warranty covering defects in materials and workmanship under normal use.

వారంటీ సమాచారం:

  • Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration.
  • వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

కస్టమర్ మద్దతు:

For technical assistance, parts replacement, or warranty inquiries, please contact Hyper Toys customer support:

  • Webసైట్: Visit the official Hyper Toys webసైట్ (ఉత్పత్తి ప్యాకేజింగ్‌ను చూడండి) URL).
  • ఇమెయిల్: [Insert Customer Support Email Here, if available in packaging]
  • ఫోన్: [Insert Customer Support Phone Number Here, if available in packaging]
Hyper Toy Co logo and statement about commitment to quality products
Image 8.1: Hyper Toy Co's commitment to product quality.

సంబంధిత పత్రాలు - 24V Go Kart Ride On

ముందుగాview హైపర్ ఇ-రైడ్ మిడ్-డ్రైవ్ సిటీ ఎలక్ట్రిక్ సైకిల్ ఓనర్స్ మాన్యువల్: భద్రత & నిర్వహణ
హైపర్ ఇ-రైడ్ మిడ్-డ్రైవ్ సిటీ ఎలక్ట్రిక్ సైకిల్ కోసం యూజర్ ఫ్రెండ్లీ ఓనర్స్ మాన్యువల్. భద్రత, అసెంబ్లీ, నిర్వహణ మరియు బాధ్యతాయుతమైన రైడింగ్ పద్ధతులపై సమగ్ర మార్గదర్శకత్వాన్ని అందిస్తుంది. వారంటీ యాక్టివేషన్ మరియు కస్టమర్ సపోర్ట్ గురించి వివరాలను కలిగి ఉంటుంది.
ముందుగాview హైపర్ ఈ-రైడ్ మహిళల క్రూయిజర్ బైక్ ఓనర్స్ మాన్యువల్: భద్రత, అసెంబ్లీ & నిర్వహణ
ఈ యజమాని మాన్యువల్ హైపర్ ఇ-రైడ్ మహిళల క్రూయిజర్ బైక్ కోసం అవసరమైన భద్రత, అసెంబ్లీ, నిర్వహణ మరియు రైడింగ్ మార్గదర్శకాలను అందిస్తుంది. మీ ఎలక్ట్రిక్ సైకిల్‌ను సురక్షితంగా ఎలా సరిగ్గా ఉపయోగించాలో, జాగ్రత్తగా చూసుకోవాలో మరియు ఆనందించాలో తెలుసుకోండి.
ముందుగాview హైపర్ ఇ-రైడ్ మౌంటైన్ సైకిల్ ఓనర్స్ మాన్యువల్: భద్రత, అసెంబ్లీ మరియు నిర్వహణ గైడ్
హైపర్ ఇ-రైడ్ మౌంటైన్ ఎలక్ట్రిక్ సైకిల్ కోసం అధికారిక యజమాని మాన్యువల్. సరైన పనితీరు మరియు వినియోగదారు భద్రత కోసం కీలకమైన భద్రతా మార్గదర్శకాలు, అసెంబ్లీ దశలు, నిర్వహణ విధానాలు మరియు రైడింగ్ చిట్కాలను కవర్ చేస్తుంది. 26 అంగుళాల చక్రాలు మరియు గరిష్ట బరువు 275 పౌండ్లు (124 కిలోలు) కలిగి ఉంటుంది.
ముందుగాview హైపర్+క్యూబ్ స్మార్ట్ బ్యాకప్ పరికరం: యూజర్ మాన్యువల్ మరియు సెటప్ గైడ్
ఈ గైడ్ హైపర్+క్యూబ్ స్మార్ట్ బ్యాకప్ పరికరం కోసం సెటప్, యాప్ వినియోగం, ఆటోమేటిక్ మరియు మాన్యువల్ బ్యాకప్ పద్ధతులు, ట్రబుల్షూటింగ్ మరియు మద్దతు సమాచారంతో సహా సమగ్ర సూచనలను అందిస్తుంది. iOS మరియు Android పరికరాలతో అనుకూలంగా ఉంటుంది.
ముందుగాview హైపర్‌షీల్డ్ యూనివర్సల్ లొకేటర్ యూజర్ గైడ్
హైపర్‌షీల్డ్ యూనివర్సల్ లొకేటర్‌ను కనుగొనండి, ఇది ఆపిల్ ఫైండ్ మై మరియు గూగుల్ ఫైండ్ హబ్‌లకు అనుకూలమైన బహుముఖ బ్లూటూత్ ఐటెమ్ ఫైండర్, మీ విలువైన వస్తువులను కనెక్ట్ చేసి ట్రాక్ చేయగలిగేలా రూపొందించబడింది.
ముందుగాview హైపర్‌షీల్డ్ యూనివర్సల్ లొకేటర్ యూజర్ గైడ్
ఈ యూజర్ గైడ్ హైపర్‌షీల్డ్ యూనివర్సల్ లొకేటర్ కోసం సూచనలను అందిస్తుంది, ఇది ఆపిల్ ఫైండ్ మై మరియు గూగుల్ ఫైండ్ హబ్‌లకు అనుకూలమైన బ్లూటూత్ ఫైండర్. పరికరాన్ని ఎలా కనెక్ట్ చేయాలో, ఫీచర్‌లను ఎలా ఉపయోగించాలో మరియు ట్రబుల్షూట్ చేయాలో తెలుసుకోండి.