LEHMANN LGALM-2642

LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower User Manual

Model: LGALM-2642

1. భద్రతా సమాచారం

Read and understand all safety warnings and instructions before operating this lawn mower. Failure to follow these instructions may result in serious injury.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and hearing protection.
  • Keep hands and feet away from rotating parts. The blade continues to rotate for a short period after the engine is switched off.
  • తడి గడ్డిలో లేదా వర్షంలో కోత యంత్రాన్ని ఆపరేట్ చేయవద్దు.
  • Clear the area of objects such as rocks, toys, and wires before mowing.
  • Never allow children or untrained individuals to operate the lawn mower.
  • ఇంజిన్ ఆఫ్ చేసి చల్లబరిచిన తర్వాత బాగా వెంటిలేషన్ ఉన్న ప్రదేశంలో ఇంధనం నింపండి. ఇంధనం నింపేటప్పుడు పొగ త్రాగవద్దు.
  • Always disconnect the spark plug wire before performing any maintenance or cleaning.

2. సెటప్ మరియు అసెంబ్లీ

Follow these steps to prepare your lawn mower for first use.

2.1 అన్‌ప్యాకింగ్

Carefully remove all components from the packaging. Ensure all parts are present according to the packing list.

2.2 అసెంబ్లీని నిర్వహించండి

  1. Unfold the handle and secure it in the operating position using the provided knobs or levers.
  2. Ensure all cables are routed correctly and not pinched.

2.3 ఇంజిన్ ఆయిల్ కలుపుతోంది

The engine is shipped without oil. It is crucial to add the correct type and amount of oil before starting.

  • మొవర్‌ను సమతల ఉపరితలంపై ఉంచండి.
  • ఆయిల్ ఫిల్ క్యాప్/డిప్ స్టిక్ ను గుర్తించండి.
  • Carefully pour the recommended engine oil (e.g., SAE 30 or 10W-30, approximately 0.5 liters) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.
Hand pouring oil into the lawn mower engine.
చిత్రం 2.3.1: A hand carefully pouring engine oil into the oil fill opening of the lawn mower. This step is essential before the first use to ensure proper engine lubrication.

2.4 ఇంధనాన్ని కలుపుతోంది

Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

  • ఇంజిన్ ఆఫ్ చేసి చల్లబరిచినట్లు నిర్ధారించుకోండి.
  • ఇంధన ట్యాంక్ టోపీని తెరవండి.
  • Fill the fuel tank, leaving a small space for expansion.
  • ఇంధన ట్యాంక్ మూతను సురక్షితంగా మూసివేయండి.

2.5 గ్రాస్ కలెక్షన్ బ్యాగ్ అటాచ్‌మెంట్

Assemble the grass collection bag if necessary and attach it to the rear discharge opening of the mower.

LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower with oil and spare blades.
చిత్రం 2.5.1: ఒక ఓవర్view of the LEHMANN LGALM-2642 lawn mower, including the grass collection bag, engine, and handle. Also shown are a bottle of engine oil and two cutting blades, one red and one black.

3. ఆపరేటింగ్ సూచనలు

Familiarize yourself with the controls and operating procedures before starting the engine.

3.1 ఇంజిన్‌ను ప్రారంభించడం

  1. Ensure the fuel tank is filled and engine oil is at the correct level.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. థొరెటల్ లివర్‌ను 'స్టార్ట్' లేదా 'చొక్' స్థానానికి తరలించండి.
  4. Firmly grasp the starter handle and pull the starter cord with a smooth, continuous motion until the engine starts.
  5. Once the engine starts, gradually move the throttle lever to the 'RUN' position.
Hand pulling the starter cord of the lawn mower.
చిత్రం 3.1.1: A hand pulling the starter cord to initiate the engine of the lawn mower.

3.2 కట్టింగ్ ఎత్తును సర్దుబాటు చేయడం

The cutting height can be adjusted to 5 levels, ranging from 25 mm to 70 mm.

  • Ensure the engine is off and the blade has stopped rotating.
  • Locate the height adjustment levers, typically near the wheels.
  • Move the levers to the desired cutting height setting. Ensure all wheels are set to the same height.
Close-up of the lawn mower's cutting height adjustment mechanism, showing settings from 2.5 cm to 7 cm.
చిత్రం 3.2.1: ఒక వివరణాత్మక view of the lawn mower's cutting height adjustment, illustrating the five available settings from 2.5 cm (25 mm) to 7 cm (70 mm).
Hand adjusting the cutting height lever on the lawn mower.
చిత్రం 3.2.2: A hand manipulating the red lever on the side of the lawn mower to adjust the cutting height.

3.3 ఎంగేజింగ్ సెల్ఫ్ ప్రొపల్షన్

This model features self-propulsion for easier operation.

  • With the engine running, engage the self-propel lever (usually located on the handle).
  • The mower will begin to move forward. Release the lever to disengage self-propulsion.
Person operating the LEHMANN LGALM-2642 self-propelled lawn mower on a green lawn.
చిత్రం 3.3.1: A person demonstrating the use of the LEHMANN LGALM-2642 self-propelled lawn mower, pushing it across a well-maintained lawn.

3.4 గడ్డి సంచిని ఖాళీ చేయడం

Regularly check and empty the grass collection bag to maintain optimal cutting performance.

  • Stop the engine and wait for the blade to stop completely.
  • Lift the rear discharge flap and carefully remove the grass bag.
  • గడ్డి ముక్కలను తగిన కంటైనర్‌లో వేయండి.
  • Reattach the grass bag securely.
Hand removing the grass collection bag from the lawn mower.
చిత్రం 3.4.1: A hand detaching the grass collection bag from the rear of the lawn mower, ready for emptying.

3.5 ఇంజిన్‌ను ఆపడం

To stop the engine, release the engine brake lever (usually located on the handle). The engine will shut off automatically.

4. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ పచ్చిక మొవర్ యొక్క దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారిస్తుంది.

4.1 శుభ్రపరచడం

  • After each use, clean the underside of the mower deck to prevent grass buildup.
  • This model features a water hose connection for easy deck cleaning. Attach a garden hose to the nozzle, start the engine, and engage the blade for a few minutes to clean the deck.
  • ప్రకటనతో బాహ్య భాగాన్ని శుభ్రం చేయండిamp cloth. Do not use high-pressure washers directly on the engine or electrical components.
Close-up of the water hose connection point on the lawn mower deck and the blade being cleaned by water.
చిత్రం 4.1.1: ఒక వివరణాత్మక view showing the water hose connection on the mower deck, designed for easy cleaning of the blade and underside with water.

4.2 బ్లేడ్ కేర్

  • Regularly inspect the blade for sharpness and damage. A dull blade tears grass, leading to an unhealthy lawn.
  • If the blade is dull, have it sharpened or replaced by a qualified service technician.
  • Always disconnect the spark plug wire before inspecting or working on the blade.
Close-up of the red cutting blade inside the mower deck.
చిత్రం 4.2.1: ఒక క్లోజప్ view of the red cutting blade within the mower deck, highlighting its design for efficient grass cutting.

4.3 ఇంజిన్ ఆయిల్ మార్పు

మొదటి 5 గంటల ఆపరేషన్ తర్వాత ఇంజిన్ ఆయిల్ మార్చండి, తరువాత ప్రతి 25 గంటలకు లేదా ఏటా, ఏది ముందు వస్తే అది మార్చండి.

  • Run the engine for a few minutes to warm the oil.
  • ఇంజిన్‌ను ఆపి, స్పార్క్ ప్లగ్ వైర్‌ను డిస్‌కనెక్ట్ చేయండి.
  • Place a suitable container under the oil drain plug (or tilt the mower to drain from the fill tube).
  • Remove the drain plug (or fill cap) and allow the oil to drain completely.
  • Replace the drain plug and refill with the recommended amount and type of new engine oil.

4.4 ఎయిర్ ఫిల్టర్ తనిఖీ మరియు శుభ్రపరచడం

Inspect the air filter regularly and clean or replace it as needed to ensure proper engine performance.

Close-up of the lawn mower engine, showing the air filter cover.
చిత్రం 4.4.1: ఒక క్లోజప్ view of the lawn mower's engine, with a focus on the air filter housing, which requires regular inspection and cleaning.

4.5 స్పార్క్ ప్లగ్ తనిఖీ

Inspect the spark plug annually or every 50 hours. Clean or replace if necessary.

Hand connecting the spark plug cap to the engine.
చిత్రం 4.5.1: A hand carefully connecting the spark plug cap to the engine, a routine maintenance task.

4.6 నిల్వ

For long-term storage, ensure the fuel tank is empty or treated with a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area. The foldable handle allows for space-saving storage.

5. ట్రబుల్షూటింగ్

ఈ విభాగం మీ పచ్చిక కోసే యంత్రంతో మీరు ఎదుర్కొనే సాధారణ సమస్యలను పరిష్కరిస్తుంది.

సమస్యసాధ్యమైన కారణంపరిష్కారం
ఇంజిన్ ప్రారంభం కాదు
  • ఇంధనం లేదా పాత ఇంధనం లేదు
  • Engine oil level too low
  • స్పార్క్ ప్లగ్ వైర్ డిస్‌కనెక్ట్ చేయబడింది
  • అడ్డుపడే గాలి వడపోత
  • తప్పు స్పార్క్ ప్లగ్
  • Fill with fresh fuel
  • తనిఖీ చేసి నూనె జోడించండి
  • స్పార్క్ ప్లగ్ వైర్‌ను కనెక్ట్ చేయండి
  • ఎయిర్ ఫిల్టర్‌ను శుభ్రపరచండి/భర్తీ చేయండి
  • స్పార్క్ ప్లగ్‌ని తనిఖీ చేయండి/భర్తీ చేయండి
మొవర్ అసమానంగా కోతలు
  • నిస్తేజంగా లేదా దెబ్బతిన్న బ్లేడ్
  • Uneven cutting height adjustment
  • Excessive grass buildup under deck
  • బ్లేడ్‌ను పదును పెట్టండి లేదా భర్తీ చేయండి
  • Ensure all wheels are set to the same height
  • Clean mower deck
విపరీతమైన కంపనం
  • Bent or unbalanced blade
  • Loose engine mounting bolts
  • Inspect and replace blade if bent; balance if dull
  • అన్ని బోల్ట్‌లను బిగించండి
Self-propulsion not engaging
  • డ్రైవ్ బెల్ట్ వదులుగా లేదా పాడైపోయింది
  • Control cable adjustment
  • Inspect and replace drive belt
  • Adjust or replace control cable

6. స్పెసిఫికేషన్లు

Key technical details for the LEHMANN LGALM-2642 Lawn Mower.

Diagram showing the dimensions of the LEHMANN LGALM-2642 lawn mower.
చిత్రం 6.1.1: A diagram illustrating the key dimensions of the LEHMANN LGALM-2642 lawn mower, including length (139 cm), width (48 cm), and height (103 cm).
ఫీచర్వివరాలు
మోడల్ సంఖ్యLGALM-2642
ఇంజిన్ రకం146 cm³ OHV Internal Combustion Engine
ఇంజిన్ పవర్3.49 hp (2.6 kW)
కట్టింగ్ వెడల్పు42 సెం.మీ
కట్టింగ్ ఎత్తు సర్దుబాటు5 స్థాయిలు (25 మిమీ - 70 మిమీ)
గ్రాస్ బ్యాగ్ కెపాసిటీ40 లీటర్లు
సిఫార్సు చేయబడిన పచ్చిక ప్రాంతం2000 m² వరకు
ఆపరేషన్ మోడ్Self-Propelled (Automatic)
మెటీరియల్మిశ్రమం ఉక్కు
వస్తువు బరువు29 కిలోలు
ఉత్పత్తి కొలతలు (L x W x H)Approx. 139 cm x 48 cm x 103 cm (assembled)

7. వారంటీ మరియు మద్దతు

LEHMANN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact LEHMANN customer service.

7.1 కస్టమర్ మద్దతు

If you have any questions, require technical assistance, or need to order replacement parts, please contact LEHMANN customer support through the retailer where you purchased the product or visit the official LEHMANN webసంప్రదింపు వివరాల కోసం సైట్.

When contacting support, please have your model number (LGALM-2642) and purchase date available.

సంబంధిత పత్రాలు - LGALM-2642

ముందుగాview లెమాన్ ఫర్మ్‌వేర్ అప్‌డేటర్: లాక్‌లు మరియు RFID రీడర్‌ల కోసం ఆపరేటింగ్ సూచనలు
ఈ పత్రం LEHMANN ఫర్మ్‌వేర్ అప్‌డేటర్ సాఫ్ట్‌వేర్ కోసం ఆపరేటింగ్ సూచనలను అందిస్తుంది, Lehmann లాక్‌లు, RFID రీడర్‌లు మరియు టెర్మినల్‌లలో ఫర్మ్‌వేర్‌ను ఎలా అప్‌డేట్ చేయాలో వివరిస్తుంది. సిస్టమ్ అవసరాలు, అనుకూల ఉత్పత్తులు మరియు దశల వారీ మార్గదర్శకత్వం ఉన్నాయి.
ముందుగాview LEHMANN నిర్వహణ సాఫ్ట్‌వేర్ వినియోగదారు గైడ్: కాన్ఫిగరేషన్ మరియు ఆపరేషన్
LEHMANN మేనేజ్‌మెంట్ సాఫ్ట్‌వేర్ (LMS) కోసం సమగ్ర వినియోగదారు గైడ్, ఆఫ్‌లైన్ మరియు ఆన్‌లైన్ మోడ్‌లలో LEHMANN RFID వ్యవస్థల కాన్ఫిగరేషన్, ఆపరేషన్ మరియు నిర్వహణను వివరిస్తుంది. ట్రాన్స్‌పాండర్ మరియు లాక్ నిర్వహణ, వినియోగదారు సెట్టింగ్‌లు మరియు సిస్టమ్ నిర్వహణను కవర్ చేస్తుంది.
ముందుగాview లెహ్మాన్ CNC రోటరీ టేబుల్స్ - ప్రధాన కేటలాగ్ ఎడిషన్ 4 | PGD, E, DD సిరీస్
CNC రోటరీ టేబుల్స్ కోసం LEHMANN యొక్క ప్రధాన కేటలాగ్ ఎడిషన్ 4. PGD, E-సిరీస్, DD సిరీస్ మరియు మరిన్నింటిని అన్వేషించండి. పారిశ్రామిక ఆటోమేషన్ మరియు ఖచ్చితత్వ తయారీ కోసం హై-స్పీడ్, బ్యాక్‌లాష్-రహిత పరిష్కారాలు.
ముందుగాview LEHMANN M610 LEGIC L043-A03 ఎలక్ట్రానిక్ లాకర్ లాక్ ఆపరేటింగ్ సూచనలు
LEHMANN M610 LEGIC L043-A03 ఎలక్ట్రానిక్ లాకర్ లాక్ కోసం సమగ్ర ఆపరేటింగ్ సూచనలు, ఇన్‌స్టాలేషన్, ప్రోగ్రామింగ్, ఆపరేషన్, నిర్వహణ మరియు ట్రబుల్షూటింగ్‌ను కవర్ చేస్తాయి.
ముందుగాview LEHMANN RFID కార్టెన్‌ప్రోగ్రామీయుంగ్: అన్లీటుంగ్ అండ్ ఉబెర్సిచ్ట్
Erfahren Sie, Wie Sie LEHMANN RFID-Schließsysteme mit verschiedenen Karten Wie Installations-, Master- und User-Karten programmieren. Diese Anleitung erklärt die Betriebsmodi, Funktionen und den Reset-Prozess.
ముందుగాview లెహ్మాన్ వెర్టో డయల్ లాక్ ప్రైవేట్ రైట్ (ఫిక్స్-కోడ్) - ఆపరేటింగ్ సూచనలు & యూజర్ మాన్యువల్
LEHMANN VERTO DIAL LOCK PRIVATE RIGHT (FIX-CODE) కోసం సమగ్ర ఆపరేటింగ్ సూచనలు మరియు యూజర్ మాన్యువల్. యూజర్ కోడ్‌ను ఎలా సెట్ చేయాలో, మార్చాలో మరియు రీసెట్ చేయాలో మరియు అత్యవసర ఓపెనింగ్‌లను ఎలా చేయాలో తెలుసుకోండి.