1. పరిచయం
The OONO F-1060 is an AC/DC 12V Single Pole Single Throw (SPST) latching relay module designed for various control applications. A key feature of this module is its power-off memory, which ensures that the output switch status remains unchanged even if the power supply is interrupted. This manual provides essential information for the safe and effective installation, operation, and maintenance of your F-1060 relay module.
2. భద్రతా సమాచారం
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or property damage.
- పవర్ డిస్కనెక్ట్ చేయండి: Always disconnect power to the circuit before performing any installation, wiring, or maintenance.
- అర్హత కలిగిన సిబ్బంది: Installation and wiring should be performed by qualified personnel familiar with electrical systems and local electrical codes.
- వాల్యూమ్tagఇ మరియు ప్రస్తుత రేటింగ్లు: పేర్కొన్న వాల్యూమ్ని మించకూడదుtage and current ratings of the relay module.
- సరైన ఎన్క్లోజర్: Ensure the module is installed in a suitable enclosure to protect it from environmental factors and accidental contact.
- వైరింగ్: Use appropriate wire gauges for the current load and ensure all connections are secure.
3. ఉత్పత్తి ముగిసిందిview
The OONO F-1060 is a compact, pre-wired latching relay module housed in a durable polycarbonate plastic enclosure. It features a Single Pole Single Throw (SPST) output switch and accepts AC/DC 12V input control signals. The module is designed for easy integration into various electrical systems, offering reliable power-off memory functionality.
మూర్తి 3.1: ముందు view of the OONO F-1060 Latching Relay Module, showing the product label with input and contact ratings, and wiring diagram for the internal relay.
4. స్పెసిఫికేషన్లు
మూర్తి 4.1: Detailed dimensional drawing of the OONO F-1060 module, including measurements in millimeters and inches, and NPT 1/2" nipple details.
| పరామితి | విలువ |
|---|---|
| మోడల్ | F-1060 |
| ఇన్పుట్ కంట్రోల్ సిగ్నల్ | AC/DC 12V |
| Supported Input Types | AC, DC COM+ (Sink NPN), DC COM- (Source PNP) |
| Input Current (12V AC/DC) | 84mA |
| Output Switch Type | SPST (సింగిల్ పోల్ సింగిల్ త్రో) |
| Contact Rating (AC) | 20A / 250VAC |
| Contact Rating (DC) | 20A / 30VDC |
| సంప్రదింపు మెటీరియల్ | వెండి |
| ఎన్క్లోజర్ మెటీరియల్ | పాలికార్బోనేట్ ప్లాస్టిక్ |
| మౌంటు | NPT 1/2" mounting nipple, Two screw mounting holes |
| కనెక్టర్ రకం | వైర్డు |
| కొలతలు (సుమారుగా) | 5.59 x 2.91 x 1.77 అంగుళాలు (ప్యాకేజీ) |
| బరువు (సుమారుగా) | 5.61 ఔన్సులు (ప్యాకేజీ) |
5. ప్యాకేజీ విషయాలు
ప్యాకేజీని తెరిచినప్పుడు అన్ని వస్తువులు ఉన్నాయని మరియు దెబ్బతినకుండా ఉన్నాయని ధృవీకరించండి.
మూర్తి 5.1: The OONO F-1060 Latching Relay Module shown with its pre-wired leads, NPT 1/2" zinc alloy conduit locknut, and two M3x50mm mounting screws.
- 1x OONO F-1060 Latching Relay Module (pre-wired)
- 1x NPT 1/2" Zinc alloy conduit locknut
- 2x M3x50mm మరలు
6. సెటప్ మరియు ఇన్స్టాలేషన్
Follow these steps for proper installation of the relay module.
6.1 మౌంటు
- The module features a NPT 1/2" mounting nipple, allowing flexible installation with a junction box or outlet box. Secure it using the provided zinc alloy conduit locknut.
- Two screw mounting holes are provided for fixing the module to a wall or wooden board using the supplied M3x50mm screws.
మూర్తి 6.1: Examples demonstrating how the OONO F-1060 module can be installed within a standard electrical junction box using its NPT nipple and locknut.
6.2 వైరింగ్ సూచనలు
Refer to the wiring diagrams below for connecting the input control signal and the load. Ensure all connections are tight and insulated.
మూర్తి 6.2: Comprehensive wiring diagrams illustrating connections for DC COM+ (Sink NPN), DC COM- (Source PNP), and AC input control signals. Each diagram shows the connection of the BLU ON, GRN OFF, YLW COM, RED, and BLK wires to the power source, control inputs, and the load.
- Input Control Wires:
- BLU ON: Connect to the positive control signal to turn the relay ON.
- GRN OFF: Connect to the positive control signal to turn the relay OFF.
- YLW COM: Common wire for the input control signal.
- Output Switch Wires (SPST):
- ఎరుపు: One side of the SPST switch.
- BLK: The other side of the SPST switch.
- లోడ్ కనెక్షన్: Connect your load (e.g., light, motor) in series with the RED and BLK wires and the power source for the load.
- ఇన్పుట్ సిగ్నల్ రకాలు: The module supports AC, DC COM+ (Sink NPN), or DC COM- (Source PNP) input control signals. Ensure your control signal matches the module's requirements.
7. ఆపరేటింగ్ సూచనలు
The OONO F-1060 is a latching relay, meaning it maintains its state (ON or OFF) until a new control signal is received, even if power to the control circuit is removed.
- ఆన్ చేస్తోంది: Apply a momentary AC/DC 12V signal between the BLU ON wire and the YLW COM wire. The relay will switch to the ON state and remain ON.
- ఆఫ్ చేయడం: Apply a momentary AC/DC 12V signal between the GRN OFF wire and the YLW COM wire. The relay will switch to the OFF state and remain OFF.
- పవర్-ఆఫ్ మెమరీ: If the main power supply to the module is interrupted, the relay's last state (ON or OFF) will be preserved. When power is restored, the relay will resume its previous state without requiring a new control signal.
8. నిర్వహణ
The OONO F-1060 relay module is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and performance.
- దృశ్య తనిఖీ: Periodically inspect the module and its wiring for any signs of damage, loose connections, or corrosion.
- శుభ్రపరచడం: If necessary, gently clean the exterior of the module with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- పర్యావరణ పరిస్థితులు: అకాల వైఫల్యాన్ని నివారించడానికి ఆపరేటింగ్ వాతావరణం పేర్కొన్న ఉష్ణోగ్రత మరియు తేమ పరిధిలో ఉండేలా చూసుకోండి.
9. ట్రబుల్షూటింగ్
If you encounter issues with your OONO F-1060 relay module, refer to the following troubleshooting guide:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Relay does not switch ON/OFF | Incorrect wiring of control signals No control signal present నియంత్రణ సిగ్నల్ వాల్యూమ్tage incorrect (not 12V) Faulty control switch/source | Verify wiring against diagrams (Figure 6.2). Check for presence of 12V AC/DC signal. Measure control signal voltage. Test control switch/source independently. |
| Load does not receive power when relay is ON | Incorrect load wiring Load power supply issue Overloaded relay contacts Faulty load | Check load wiring. Ensure power source for load is active. Verify load power supply. Ensure load current does not exceed 20A. Test load independently. |
| Relay does not maintain state after power cycle | This module is designed to maintain state. If it fails, the module may be faulty. | సహాయం కోసం కస్టమర్ సపోర్ట్ని సంప్రదించండి. |
| Module appears damaged | భౌతిక ప్రభావం ఓవర్వోల్tagఇ/ఓవర్ కరెంట్ | Disconnect power immediately. Do not attempt to repair. Contact customer support. |
10. వారంటీ మరియు మద్దతు
OONO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact your retailer. Please have your product model number (F-1060) available when contacting support.
