UIBI X7 Jump Starter with Air Compressor Instruction Manual

పరిచయం

This manual provides detailed instructions for the safe and effective use of your UIBI X7 Jump Starter with Air Compressor. This device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before operation and retain it for future reference.

ఉత్పత్తి ముగిసిందిview మరియు భాగాలు

The UIBI X7 is a versatile 7-in-1 device. Familiarize yourself with all components before use.

• UIBI X7 Jump Starter with 160PSI Air Compressor
• Smart Jumper Cables (Heavy-Duty)
• USB-A to USB-C Charging Cable (Wall charger not included)
• Detachable Extended Air Hose
• 3 Versatile Air Nozzles
• రగ్డ్ క్యారీయింగ్ కేసు
• ఇన్స్ట్రక్షన్ మాన్యువల్

Image: UIBI X7 Jump Starter with Air Compressor, smart jumper cables, USB-C charging cable, air hose, and various nozzles, all contained within a carrying case.

Image: A visual representation of the UIBI X7 unit and its accompanying accessories, including jumper cables, air hose, and charging cable.

స్పెసిఫికేషన్లు

సెటప్ మరియు ప్రారంభ ఛార్జ్

Charging the UIBI X7

Before first use, fully charge the UIBI X7. It is recommended to charge the device every 3-6 months to maintain battery health, especially if not used regularly.

1. Connect the provided USB-A to USB-C charging cable to the PD45W IN/OUT port on the UIBI X7.
2. Connect the other end of the cable to a compatible PD45W wall charger (not included).
3. The display will indicate charging status. A full charge from 0% takes approximately 2 hours with a PD45W charger.

Image: The UIBI X7 unit connected to a charger via its PD45W port, illustrating the fast charging capability.

Image: A graphic highlighting the 3X faster charging speed of the UIBI X7 with its PD45W two-way quick charge feature.

ఆపరేటింగ్ సూచనలు

A. Jump Starting a Vehicle

Ensure the UIBI X7 is sufficiently charged before attempting to jump start a vehicle.

1. చొప్పించు: Insert the smart jumper cable plug into the jump starter port on the UIBI X7.
2. కనెక్ట్ చేయండి: ఎరుపు clని అటాచ్ చేయండిamp వాహన బ్యాటరీ యొక్క పాజిటివ్ (+) టెర్మినల్ మరియు బ్లాక్ cl కుamp ప్రతికూల (-) టెర్మినల్‌కు.
3. సిద్ధంగా ఉంది: Ensure the indicator light on the smart jumper cable is green. If it's red or flashing, check connections or refer to troubleshooting.
4. ప్రారంభం: Start your vehicle's engine. Once the engine starts, immediately remove the jumper cables in reverse order (black clamp మొదట, తరువాత ఎరుపు clamp, then disconnect from the jump starter).

Image: The UIBI X7 jump starter connected to a car battery under the hood, ready to start a dead vehicle.

Image: A four-step visual guide demonstrating how to easily jump start a vehicle using the UIBI X7.

B. Inflating Tires

The UIBI X7 features a 160PSI air compressor with smart LED display and auto-shutoff.

1. సమీకరించండి: Screw the detachable extended air hose onto the air outlet port of the UIBI X7. Select the appropriate nozzle for your item (car tire, bicycle, ball, etc.) and attach it to the other end of the hose. Connect the nozzle to the item's valve.
2. Mode/Unit: Short press the 'M' key to select the inflation mode (e.g., car, motorcycle, bicycle, ball). Long press 'M' to switch between pressure units (PSI, BAR, KPA, Kg/cm²).
3. Preset Value: Use the '+' and '-' buttons to set the desired tire pressure. Short press for fine adjustment, long press for quick adjustment.
4. పెంచి: Press the power button to start inflation. The compressor will automatically stop when the preset pressure is reached.

Image: The UIBI X7 unit actively inflating a car tire, displaying the digital pressure reading.

Image: A four-step visual guide demonstrating how to easily inflate tires using the UIBI X7's air compressor function.

C. Using as a Portable Power Bank

The UIBI X7 can charge electronic devices via its USB output ports.

• Connect your device's charging cable to either the Type-C PD45W port or the USB-A QC3.0 port on the UIBI X7.
• The UIBI X7 will automatically begin charging your device.

Image: The UIBI X7 unit connected via cables to two smartphones, demonstrating its capability to fast charge multiple devices.

Image: The UIBI X7 connected to a laptop and a smartphone, illustrating its use as a portable power bank with USB-C and USB-A outputs.

D. Using the LED Light

The UIBI X7 includes a multi-mode LED light for various situations.

• Press the light button (usually indicated by a light bulb icon) to cycle through the modes: Flashlight, Strobe, and SOS.
• లైట్ ఆఫ్ చేయడానికి బటన్‌ను నొక్కి పట్టుకోండి.

Image: The UIBI X7 unit with its LED light illuminated, showcasing its emergency lighting capabilities.

Image: A graphic illustrating the three modes of the UIBI X7's LED light: Flashlight, SOS, and Strobe.

నిర్వహణ

• నిల్వ: Store the UIBI X7 in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
• ఛార్జింగ్: Recharge the device every 3-6 months, even if not used, to prevent deep discharge and prolong battery life.
• శుభ్రపరచడం: మెత్తటి, పొడి గుడ్డతో యూనిట్‌ను తుడవండి. కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్‌లను ఉపయోగించవద్దు.
• కేబుల్ తనిఖీ: Regularly inspect jumper cables and air hose for any signs of damage or wear. Replace if necessary.

ట్రబుల్షూటింగ్

Jump Starter Issues

• Vehicle does not start:
  • Ensure the UIBI X7 is fully charged.
  • Check that the jumper cable clampలు సరైన బ్యాటరీ టెర్మినల్స్‌కు సురక్షితంగా కనెక్ట్ చేయబడ్డాయి (ఎరుపు నుండి పాజిటివ్, నలుపు నుండి నెగటివ్).
  • Verify the smart jumper cable indicator light is green. If not, disconnect and reconnect.
  • The vehicle battery might be severely discharged. Wait a few minutes after connecting before attempting to start.
• Smart jumper cable indicator is red/flashing:
  • Indicates incorrect connection (reverse polarity), short circuit, or other safety issue. Disconnect immediately and re-evaluate connections.

Air Compressor Issues

• కంప్రెసర్ ప్రారంభం కాదు:
  • Ensure the UIBI X7 is sufficiently charged.
  • Check that the air hose is securely attached.
  • Verify a target pressure has been set.
• సరికాని ఒత్తిడి పఠనం:
  • Ensure the nozzle is tightly connected to the valve stem.

సాధారణ సమస్యలు

• పరికరం ఆన్ చేయడం లేదు:
  • Charge the UIBI X7 fully.
• Slow charging of external devices:
  • Ensure your device and cable support PD45W or QC3.0 for optimal charging speeds.

భద్రతా సమాచారం

The UIBI X7 is equipped with an intelligent protection system to ensure safe operation. Always follow these guidelines:

• స్తంభింపచేసిన బ్యాటరీని జంప్ చేయడానికి ప్రయత్నించవద్దు.
• Do not use the jump starter if the battery voltage 10V కంటే తక్కువ.
• Ensure proper polarity when connecting jumper cables (red to positive, black to negative).
• Avoid short-circuiting the jumper clamps.
• పరికరం వర్షం లేదా తేమను బహిర్గతం చేయవద్దు.
• పిల్లలకు దూరంగా ఉంచండి.
• యూనిట్‌ను విడదీయవద్దు.
• Operate within the specified temperature range (-4°F to 140°F).
• The device features 10 smart protections including spark-proof, reverse-polarity, short circuit, over-charge, over-current, low temp, high temp, over-load, and reverse charge protection.

చిత్రం: ఒక అంతర్గత view of the UIBI X7, emphasizing its superior safety design and intelligent control board.

Image: A graphic listing the 10 smart protection features of the UIBI X7, including over-charge, short circuit, and reverse polarity protection.

వారంటీ మరియు మద్దతు

The UIBI X7 comes with a 12-month warranty. For any questions or technical support, please contact UIBI customer service. Our expert team is available to assist you.

• వారంటీ వ్యవధి: 12 నెలలు
• మద్దతు: Contact UIBI customer service for assistance.