TFA Dostmann 60.3550.16 Radio Controlled Wall Clock Instruction Manual

పరిచయం

Thank you for choosing the TFA Dostmann 60.3550.16 Radio Controlled Wall Clock. This modern analogue clock offers high accuracy through radio signal reception, automatically adjusting for daylight saving time. Designed for clarity and ease of use, it features a clear dial with large numbers and a distinct second hand, protected by a glass cover. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new wall clock.

చిత్రం: ముందు భాగం view of the TFA Dostmann 60.3550.16 Radio Controlled Wall Clock. This image illustrates the clock's modern design, clear dial, and distinct hands.

భద్రతా సమాచారం

గాయం లేదా నష్టాన్ని నివారించడానికి పరికరాన్ని ఉపయోగించే ముందు దయచేసి ఈ భద్రతా సూచనలను జాగ్రత్తగా చదవండి.

• ఈ పరికరం ఇండోర్ ఉపయోగం కోసం మాత్రమే ఉద్దేశించబడింది.
• గడియారాన్ని తీవ్రమైన ఉష్ణోగ్రతలు, ప్రత్యక్ష సూర్యకాంతి లేదా అధిక తేమకు గురిచేయవద్దు.
• గడియారాన్ని వదలడం లేదా బలమైన ప్రభావాలకు గురిచేయడం మానుకోండి.
• బ్యాటరీలను పిల్లలకు అందుబాటులో లేకుండా ఉంచండి. మింగివేసినట్లయితే, వెంటనే వైద్య సంరక్షణను కోరండి.
• Replace batteries promptly when low to prevent leakage, which can damage the device.
• స్థానిక నిబంధనల ప్రకారం ఉపయోగించిన బ్యాటరీలను పారవేయండి. బ్యాటరీలను మంటల్లో పారవేయవద్దు.
• Do not attempt to repair the device yourself. Contact qualified personnel for service.

ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని వస్తువులు ఉన్నాయని నిర్ధారించుకోండి:

• 1x TFA Dostmann 60.3550.16 Radio Controlled Wall Clock
• 1x ఇన్స్ట్రక్షన్ మాన్యువల్

Note: 1x AA 1.5V battery is required and not included in the package.

సెటప్

1. బ్యాటరీ ఇన్‌స్టాలేషన్

To power your clock, install one AA 1.5V battery:

1. గడియారం వెనుక భాగంలో ఉన్న బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను తీసివేయండి.
2. Insert one new AA 1.5V battery, ensuring the correct polarity (+ and -).
3. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మార్చండి.

చిత్రం: వెనుక view of the clock showing the battery compartment. This image helps identify where to insert the battery and locate control buttons.

2. ప్రారంభ సమయ సమకాలీకరణ

After battery insertion, the clock will automatically attempt to receive the DCF radio time signal. This process may take several minutes:

1. The hands will move to the 12 o'clock position and then begin searching for the radio signal.
2. Once the signal is successfully received, the clock will automatically set itself to the correct time.
3. Place the clock near a window or in an open area for optimal signal reception during initial setup. Avoid placing it near electronic devices that may cause interference.

3. Manual Time Setting (If Radio Signal Unavailable)

In areas with poor radio signal reception, you may need to manually set the time. Refer to the back of the clock for control buttons:

• REC బటన్: Press this button to initiate a manual search for the radio signal.
• సెట్ బటన్: If the radio signal cannot be received, press and hold the SET button to manually adjust the time. Each press will advance the minute hand.

4 మౌంటు

The clock is designed for wall mounting:

1. Select a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approximately 455g).
2. Use a screw or nail (not included) appropriate for your wall type.
3. Hang the clock using the integrated hanging hole on the back of the device.

ఆపరేటింగ్

స్వయంచాలక సమయ సర్దుబాటు

Once the radio signal is successfully received, your TFA Dostmann wall clock will automatically:

• Maintain precise time accuracy.
• Adjust automatically for Daylight Saving Time (summer/winter time changes).

The clock will periodically check and update its time signal to ensure continuous accuracy.

నిర్వహణ

క్లీనింగ్

To clean your clock:

• మృదువైన, పొడి లేదా కొద్దిగా d ఉపయోగించండిamp గుడ్డ.
• Do not use abrasive cleaners, solvents, or polishing agents, as these can damage the glass cover or casing.

బ్యాటరీ భర్తీ

When the clock hands stop moving or the time becomes inaccurate, it is time to replace the battery:

1. Remove the old AA 1.5V battery from the compartment.
2. Insert a new AA 1.5V battery, observing correct polarity.
3. The clock will then attempt to resynchronize with the radio signal.

ట్రబుల్షూటింగ్

If you encounter issues with your clock, refer to the following common problems and solutions:

• Clock not setting time or displaying incorrect time:
  - Ensure the battery is new and inserted with correct polarity.
  - Press the 'REC' button on the back to initiate a manual signal search.
  - Move the clock to a different location, preferably near a window and away from electronic devices (TVs, computers, microwaves) that may cause interference.
  - Allow sufficient time (up to several hours) for the clock to receive the radio signal, especially during initial setup or after battery change.
• Hands are stuck or not moving:
  - Replace the battery with a fresh AA 1.5V battery.
  - Check for any obstructions preventing the hands from moving freely.
• Poor radio signal reception:
  - The radio signal (DCF77) is transmitted from Mainflingen, Germany. Reception can be affected by geographical location, building materials, and local interference.
  - Try placing the clock in different orientations or locations within the room.
  - If consistent reception is not possible, use the manual time setting feature.

స్పెసిఫికేషన్లు

చిత్రం: ముందు భాగం view of the clock with dimensions. This image visually represents the physical size of the clock.

వారంటీ మరియు మద్దతు

TFA Dostmann products are manufactured with quality and precision. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official TFA Dostmann website. If you require technical support or have questions not covered in this manual, please contact your retailer or the TFA Dostmann customer service department.

దయచేసి భవిష్యత్తు సూచన కోసం ఈ మాన్యువల్‌ని ఉంచండి.