పరిచయం
The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.
ప్యాకేజీ విషయాలు
- Varmilo VPE87 Mechanical Keyboard
- USB-C కేబుల్
- 2.4 GHz Wireless Receiver (typically stored in keyboard)
- కీక్యాప్ పుల్లర్ (చేర్చబడవచ్చు)
- స్విచ్ పుల్లర్ (చేర్చబడవచ్చు)
సెటప్
Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.
1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.
- అందించిన USB-C కేబుల్ను కీబోర్డ్ యొక్క USB-C పోర్ట్కి కనెక్ట్ చేయండి.
- Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
- For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).
2. కీబోర్డ్ కోణాన్ని సర్దుబాటు చేయడం

చిత్రం: సైడ్ ప్రోfile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.
The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.
ఆపరేటింగ్ సూచనలు
కనెక్టివిటీ మోడ్లు
The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.
వైర్డ్ మోడ్
- కీబోర్డ్ నుండి USB-C కేబుల్ను మీ కంప్యూటర్కు కనెక్ట్ చేయండి.
- మీ ఆపరేటింగ్ సిస్టమ్ ద్వారా కీబోర్డ్ స్వయంచాలకంగా గుర్తించబడుతుంది.
- This mode also charges the keyboard's internal battery.
బ్లూటూత్ మోడ్
- Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
- మీ పరికరంలో (కంప్యూటర్, టాబ్లెట్, స్మార్ట్ఫోన్), బ్లూటూత్ను ప్రారంభించి, కొత్త పరికరాల కోసం శోధించండి.
- Select "Varmilo VPE87" (or similar name) from the list of available devices.
- Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.
2.4 GHz వైర్లెస్ మోడ్
- Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
- మీ కంప్యూటర్లో అందుబాటులో ఉన్న USB పోర్ట్కి USB రిసీవర్ని ప్లగ్ చేయండి.
- Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
- కీబోర్డ్ స్వయంచాలకంగా రిసీవర్కి కనెక్ట్ అవ్వాలి.
బ్యాక్లైట్ నియంత్రణ

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.
The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:
- Fn + Arrow Up: బ్యాక్లైట్ ప్రకాశాన్ని పెంచండి.
- Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
- Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.
Hotswap Sockets (Switch Customization)

చిత్రం: పైన view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.
The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.
- కీక్యాప్ను తీసివేయండి: Use a keycap puller to gently remove the desired keycap.
- స్విచ్ తొలగించు: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
- కొత్త స్విచ్ చొప్పించండి: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
- కీక్యాప్ను భర్తీ చేయండి: కీక్యాప్ను తిరిగి కొత్త స్విచ్పై ఉంచండి.
Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.
ఇతర ఫీచర్లు
- Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
- 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.
నిర్వహణ
Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.
- కీక్యాప్లను శుభ్రపరచడం:
- Use a keycap puller to remove keycaps.
- Wipe keycaps with a damp గుడ్డ మరియు తేలికపాటి సబ్బు ద్రావణం. కఠినమైన రసాయనాలను నివారించండి.
- Ensure keycaps are completely dry before reattaching.
- కీబోర్డ్ బాడీని శుభ్రం చేయడం:
- Use a soft, dry cloth to wipe down the keyboard surface.
- కీల మధ్య దుమ్ము మరియు శిధిలాల కోసం, సంపీడన గాలిని ఉపయోగించండి.
- నిల్వ: కీబోర్డ్ను ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
- ద్రవ చిందులు: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.
ట్రబుల్షూటింగ్
If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:
| సమస్య | పరిష్కారం |
|---|---|
| Keyboard not responding in Wired Mode. |
|
| బ్లూటూత్ ద్వారా కనెక్ట్ చేయడం సాధ్యం కాలేదు. |
|
| 2.4 GHz wireless connection is unstable or not working. |
|
| బ్యాక్లైట్ పనిచేయడం లేదు లేదా మసకగా ఉంది. |
|
| A specific key is not registering. |
|
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| బ్రాండ్ | వర్మిలో |
| మోడల్ | VPE87 |
| కీబోర్డ్ వివరణ | మెకానికల్ |
| కనెక్టివిటీ టెక్నాలజీ | Bluetooth, USB-C (Wired), 2.4 GHz Wireless |
| కీల సంఖ్య | 87 |
| బ్యాక్లైటింగ్ | తెలుపు LED (ఒకే రంగు) |
| ప్రత్యేక లక్షణాలు | Backlit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel |
| అనుకూల పరికరాలు | ల్యాప్టాప్, పిసి, స్మార్ట్ఫోన్, టాబ్లెట్ |
| Color (Switches) | Kailh Prestige Clicky (as per product listing) |
వారంటీ మరియు మద్దతు
Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webసైట్.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webసైట్ లేదా మీరు ఉత్పత్తిని కొనుగోలు చేసిన రిటైలర్ ద్వారా.
Visit the official Varmilo Store for more information: Varmilo Store on Amazon





