BINGFU BFN00932

Bingfu Vehicle Mobile Ham Radio Antenna User Manual

మోడల్: BFN00932 | బ్రాండ్: BINGFU

1. పరిచయం

This manual provides essential information for the proper installation, operation, and maintenance of your Bingfu Vehicle Mobile Ham Radio Antenna. This dual-band antenna is designed for VHF (136-174MHz) and UHF (400-470MHz) frequencies, featuring a strong magnetic base for vehicle mounting and a soft whip design. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని అంశాలు మీ ప్యాకేజీలో ఉన్నాయని నిర్ధారించుకోండి:

Complete Bingfu Ham Radio Antenna Kit with all components

మూర్తి 2.1: Complete antenna kit including the whip antenna, magnetic base, cable, adapters, ground planes, and hex tool.

3. ఉత్పత్తి లక్షణాలు

Diagram showing antenna dimensions, flexible whip, and low loss RG58 cable

మూర్తి 3.1: Antenna dimensions and cable type. The antenna whip is flexible, and the cable is a low-loss RG58 type.

Close-up of the magnetic base with silicone gasket and strong magnet

మూర్తి 3.2: Details of the magnetic base, highlighting its strong magnetic hold and the protective silicone rubber gasket.

4. సెటప్ & ఇన్‌స్టాలేషన్

4.1. Ground Plane Assembly

  1. Identify the central connector for the ground planes.
  2. Select the appropriate ground plane rods based on your operating frequency:
    • ఉపయోగించండి short ground planes (9.5cm/3.74inch) for optimal performance on UHF (400-470MHz).
    • ఉపయోగించండి long ground planes (15cm/5.9inch) for optimal performance on VHF (136-174MHz).
  3. Carefully screw the three selected ground plane rods into the designated ports on the central connector. Ensure they are finger-tight.
Ground plane kit components and assembly

మూర్తి 4.1: Ground plane kit showing the central connector and both short and long ground plane rods.

Diagram showing lengths of short and long ground planes for UHF and VHF

మూర్తి 4.2: Comparison of short (UHF) and long (VHF) ground plane rod lengths.

4.2. Antenna Assembly

  1. Screw the assembled ground plane unit onto the base of the antenna whip.
  2. Attach the antenna whip assembly to the magnetic base. Ensure a secure connection.

4.3. Vehicle Mounting

  1. Choose a flat, metallic surface on your vehicle, such as the roof or trunk lid, that is free from obstructions and provides a clear line of sight.
  2. Clean the chosen surface thoroughly to ensure maximum magnetic adhesion and to prevent scratching.
  3. Place the magnetic base firmly onto the cleaned metallic surface. The strong magnet will secure the antenna. The silicone gasket on the base helps protect your vehicle's paint.
  4. Route the 5m (16.4ft) RG58/U coaxial cable carefully to your radio, avoiding sharp bends, pinching, or interference with doors or windows.
Red truck with antenna mounted on the roof, illustrating easy installation

మూర్తి 4.3: Example of antenna placement on a vehicle roof for optimal signal.

4.4. Connecting to Your Radio

  1. The antenna cable terminates with a UHF PL259 Male Connector.
  2. If your radio has a UHF SO239 Female port, connect the PL259 Male connector directly.
  3. If your radio requires an SMA Female connection (common on handheld radios), use the provided SO239 to SMA Female Adapter. First, connect the PL259 Male to the SO239 side of the adapter, then connect the SMA Female side to your radio.
  4. Ensure all connections are tight to prevent signal loss.
Diagram showing SMA Male and PL259 Male connectors and their female counterparts on a radio

మూర్తి 4.4: Connector types and adapters for connecting the antenna to various mobile ham radios.

5. ఆపరేషన్

Once installed and connected, your Bingfu antenna is ready for use. Ensure your radio is set to the correct frequency band (VHF or UHF) corresponding to the ground planes you have installed for optimal performance.

Person speaking into a ham radio with the antenna mounted on a vehicle, indicating clear communication

మూర్తి 5.1: The antenna facilitates clear communication for mobile radio users.

6. నిర్వహణ

7. ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Weak signal reception or transmission.
  • Incorrect ground plane rods installed for the frequency band.
  • వదులుగా లేదా తుప్పుపట్టిన కనెక్షన్లు.
  • Antenna not properly grounded (e.g., mounted on non-metallic surface).
  • అధిక SWR.
  • సిగ్నల్‌ను నిరోధించే అడ్డంకులు.
  • Ensure correct ground planes are used (short for UHF, long for VHF).
  • Check all cable connections for tightness and cleanliness.
  • Mount antenna on a large metallic surface (vehicle roof/trunk).
  • Check SWR with a meter and adjust if necessary.
  • Relocate antenna to a clearer area.
Antenna falls off vehicle.
  • Insufficient magnetic adhesion.
  • Vehicle surface is dirty or uneven.
  • Excessive speed or strong winds.
  • మౌంటు ఉపరితలాన్ని పూర్తిగా శుభ్రం చేయండి.
  • Ensure the magnetic base is fully in contact with a flat metallic surface.
  • Reduce speed in high wind conditions.
Cable damage or wear.
  • Cable pinched by door/window.
  • Exposure to sharp edges or excessive friction.
  • Reroute cable to avoid pinching points.
  • Inspect cable regularly and replace if damaged.

8. స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
మోడల్ సంఖ్యBFN00932
ఫ్రీక్వెన్సీ రేంజ్VHF: 136-174MHz, UHF: 400-470MHz
యాంటెన్నా రకంDual Band Mobile Ham Radio Antenna with Ground Planes
యాంటెన్నా పొడవుApproximately 42cm (16.53 inches) whip, 48.5cm (19.1 inches) total with base
Magnetic Base Diameter9 సెం.మీ (3.55 అంగుళాలు)
కేబుల్ రకంRG58/U Coaxial Cable
కేబుల్ పొడవు5మీ (16.4 అడుగులు)
కనెక్టర్ రకంUHF PL259 Male
ఇంపెడెన్స్50 ఓం
రంగునలుపు
వస్తువు బరువు1.76 పౌండ్లు
ఉత్పత్తి కొలతలు (L x W x H)16.93 x 5.12 x 2.56 అంగుళాలు (ప్యాకేజ్ చేయబడింది)

9. భద్రతా సమాచారం

10. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Bingfu customer service directly. Keep your purchase receipt as proof of purchase.

తయారీదారు: బింగ్ఫు

ASIN: B0CLKLHHNP

సంబంధిత పత్రాలు - BFN00932

ముందుగాview Bingfu RF కనెక్టర్ వినియోగ మార్గదర్శకాలు
సరైన పనితీరు మరియు దీర్ఘాయువును నిర్ధారించడానికి Bingfu RF కనెక్టర్‌ల సరైన సంస్థాపన మరియు ఉపయోగం కోసం సంక్షిప్త మార్గదర్శకాలు.
ముందుగాview బడ్జెట్ DIY GPS/GNSS బేస్ స్టేషన్ / ESP32 మరియు UM980 తో రిసీవర్ సెటప్
ESP32 మైక్రోకంట్రోలర్ మరియు యూనికోర్‌కామ్ UM980 మాడ్యూల్‌ని ఉపయోగించి ఖర్చుతో కూడుకున్న DIY GPS/GNSS బేస్ స్టేషన్ లేదా రిసీవర్‌ను ఎలా నిర్మించాలో తెలుసుకోండి. ఈ గైడ్ కస్టమ్ హై-ప్రెసిషన్ లొకేషన్ సిస్టమ్‌ను సృష్టించడానికి హార్డ్‌వేర్, ఫర్మ్‌వేర్ మరియు కాన్ఫిగరేషన్‌ను కవర్ చేస్తుంది.
ముందుగాview ఉత్పత్తి జాబితా మరియు ప్రీస్ ఫర్ ఎలెక్ట్రానిక్ అండ్ జుబెహోర్
Umfassende Liste von Elektronikprodukten und Zubehör mit Detaillierten Preisinformationen. ఎంట్‌డెకెన్ సై ఐన్ బ్రైట్ పాలెట్ వాన్ మార్కెన్ అండ్ ఆర్టికెల్న్, వాన్ కోప్‌హోరెర్న్ అండ్ లాట్స్‌ప్రెచెర్న్ బిస్ హిన్ జు కంప్యూటర్ అండ్ మొబిల్‌టెలెఫోన్జుబెహోర్.