KAIWEETS Stud Finder Wall Scanner User Manual

పరిచయం

Welcome to the KAIWEETS Stud Finder Wall Scanner user manual. This 4-in-1 electronic detector is designed to accurately locate studs, metal, and live AC wires hidden behind walls, floors, and ceilings. Please read this manual thoroughly before use to ensure safe and effective operation.

ప్యాకేజీ విషయాలు

• 1x KAIWEETS Stud Finder
• 1x 9V Battery
• 1x Dustproof Bag
• 1x వినియోగదారు మాన్యువల్

The KAIWEETS KES01-GRAY Stud Finder, shown alongside the included 9V battery, ready for use.

కీ ఫీచర్లు

• Tricolor Backlight: Clear direction and accurate location with green (no target), orange (edge), and red (center) indicators.
• ఖచ్చితమైన గుర్తింపు: Intelligent microprocessor chip for precise location of metal, wood, studs, joists, pipes, or live AC wires.
• 4-in-1 Multi-functional Modes: Includes 3/4" and 1-1/2" stud scan modes, metal scan mode, and AC scan mode.
• మొదటి భద్రత: Indicates live AC wires in all modes to prevent drilling into electrical wires.

This diagram illustrates the four distinct scanning modes of the KAIWEETS stud finder, detailing their respective detection depths for wood studs (3/4 inch and 1 1/2 inch), metal objects (up to 2.36 inches), and live AC wires (up to 2 inches.

ఉత్పత్తి ముగిసిందిview

Familiarize yourself with the components of your KAIWEETS Stud Finder.

A detailed diagram of the KAIWEETS KES01 stud finder, highlighting key components such as the display screen, power/mode button, calibration button, and indicators for stud mode, metal mode, AC mode, AC wire warning, battery, and stud center/edge.

సెటప్

బ్యాటరీ సంస్థాపన

The KAIWEETS Stud Finder requires one 9V battery (included).

1. పరికరం వెనుక భాగంలో బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను తెరవండి.
2. 9V బ్యాటరీని చొప్పించండి, సరైన ధ్రువణతను (+/-) నిర్ధారించుకోండి.
3. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.

ప్రారంభ పవర్ ఆన్

Press the "MODE" button to power on the device. The LCD screen will light up.

ఆపరేటింగ్ సూచనలు

సాధారణ ఆపరేషన్ చిట్కాలు

• Ensure the device is calibrated correctly before each scan.
• Hold the device flat against the wall surface.
• Move the device slowly and steadily across the surface.
• Pay attention to the visual indicators on the LCD and the audio alarm.

Stud Mode Operation

The stud finder offers 3/4" and 1-1/2" stud scan modes to locate the center and edge of wood, metal, beams, or joists.

1. మోడ్‌ని ఎంచుకోండి: Press the "MODE" button to select the desired stud mode (3/4" or 1-1/2"). To minimize false readings, always start your scan in 3/4in. Mode first.
2. క్రమాంకనం: Place the device flat against a blank section of the wall where you are certain there are no studs or objects. Press and hold the calibration button (side button) until the calibration is complete (usually indicated by a beep and a stable display).
3. స్కానింగ్: Slowly slide the device horizontally across the surface.
4. గుర్తింపు:
   • నారింజ బ్యాక్‌లైట్: Indicates the detection of a stud edge. An arrow on the screen will point towards the center.
   • Red Backlight & Audio Alarm: Indicates the detection of the stud center. The buzzer will sound an alarm.

This video provides a visual guide on how to operate the KAIWEETS Stud Finder, showcasing the process of calibration and scanning in stud mode, and how the device indicates the edge and center of a stud.

This image sequence demonstrates the stud finder's tri-color backlight system: green when no target is detected, orange when an edge is found, and red when the center of a stud is located, accompanied by an audible alarm.

Metal Mode Operation

The metal scan mode detects metal (Ferrous and Non-Ferrous Metal) up to 2.36'' deep.

1. Initial Scan (Optional but Recommended): Before using the metal mode, use stud 3/4in. mode or stud 1½in. mode to quickly locate the center and edges of the target. This helps differentiate between wood and metal objects.
2. మోడ్‌ని ఎంచుకోండి: Press the "MODE" button to select Metal Mode.
3. క్రమాంకనం: Calibrate the device against a blank wall section.
4. Scanning & Detection: Slowly slide the device across the surface. The device will indicate the presence of metal with visual and audio cues. If the metal mode can scan the target again, the target is a metal object, otherwise it is wood.

This image highlights the accurate detection capabilities of the stud finder, showing it identifying rebar within a wall. Inset images further illustrate its ability to find metal pipes, AC live wires, wooden beams, and rebars.

AC Scan Mode Operation

The AC scan mode detects live unshielded AC wires up to 2'' deep.

1. మోడ్‌ని ఎంచుకోండి: Press the "MODE" button to select AC Mode.
2. క్రమాంకనం: Calibrate in the air. Keep a distance from the detection surface and keep your hands away from the back of the device.
3. Scanning & Detection: Slowly slide the device across the surface. The device will indicate the presence of live AC wires with visual and audio cues.

This image emphasizes the safety feature of the KAIWEETS stud finder, which indicates the presence of live AC wires in all modes, helping users avoid accidental drilling into electrical lines.

నిర్వహణ

• పరికరాన్ని మృదువైన, పొడి వస్త్రంతో శుభ్రం చేయండి. రాపిడి క్లీనర్‌లను లేదా ద్రావకాలను ఉపయోగించవద్దు.
• Store the device in the dustproof bag provided when not in use.
• పరికరం ఎక్కువ కాలం ఉపయోగించబడకపోతే, లీకేజీని నివారించడానికి బ్యాటరీని తీసివేయండి.
• పరికరాన్ని విపరీతమైన ఉష్ణోగ్రతలు లేదా తేమకు గురిచేయకుండా ఉండండి.

ట్రబుల్షూటింగ్

సాధారణ సమస్యలు మరియు పరిష్కారాలు

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

KAIWEETS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or visit the official KAIWEETS webసైట్.

Official KAIWEETS Store: Visit KAIWEETS Store on Amazon