పరిచయం
This manual provides instructions for the proper use and care of your EasyKeys K134 replacement key, designed for Kennedy toolboxes with lock codes in the K101 - K299 series. This key is custom-cut to match your specific K134 lock code, ensuring compatibility and functionality.
Identifying Your Lock Code
Before using your replacement key, ensure you have correctly identified your toolbox's lock code. The K134 key is specifically cut for the K134 lock code. Lock codes are typically found in one of the following locations:
Image: This diagram illustrates common locations where you can find your lock code. These include directly on an existing key (e.g., "FR322"), engraved on the face of the lock cylinder (e.g., "FR322"), on a sticker or label inside or behind the lock mechanism (e.g., "CODE: G38"), or on a label affixed to the cabinet or door near the lock (e.g., "HF321"). Always verify the code matches your replacement key.
- On the Key: If you have an original key, the code is often stamped directly onto the key blade or head.
- On the Lock Face: The code may be engraved on the metal face of the lock cylinder itself.
- On a Label Inside/Behind the Lock: For some toolboxes, the code is on a sticker or label located inside the toolbox drawer or cabinet, or directly on the lock mechanism when removed.
- On the Cabinet/Door Label: Occasionally, a label with the lock code can be found on the toolbox cabinet or door, near the lock.
ముఖ్యమైన గమనికలు:
- Manufacturer Specificity: Lock codes are specific to the manufacturer. Ensure your key matches the Kennedy brand and the K134 code.
- Key Cut Variations: Even if codes appear similar, key cuts can vary significantly between brands. Always confirm the exact code and manufacturer.
ఆపరేటింగ్ సూచనలు
- Insert the Key: Gently insert the K134 replacement key into the lock cylinder of your Kennedy toolbox. Do not force the key.
- Turn the Key: Once fully inserted, turn the key clockwise or counter-clockwise (depending on the lock mechanism) to engage the locking or unlocking mechanism.
- Remove the Key: After locking or unlocking, return the key to its original position (usually vertical) before gently pulling it out.
If the key does not turn smoothly, do not apply excessive force. Refer to the Troubleshooting section.
నిర్వహణ
- శుభ్రముగా ఉంచు: Keep the key clean and free from dirt, dust, or debris. Wipe with a soft, dry cloth if necessary.
- నష్టాన్ని నివారించండి: Do not bend, scratch, or otherwise damage the key blade, as this can affect its functionality.
- లూబ్రికేషన్ (ఐచ్ఛికం): If the lock mechanism becomes stiff over time, a small amount of graphite-based lubricant designed for locks can be applied to the key or directly into the keyway. Avoid oil-based lubricants.
- నిల్వ: నష్టం లేదా నష్టాన్ని నివారించడానికి కీని సురక్షితమైన స్థలంలో భద్రపరచండి.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Key does not insert fully. | Obstruction in keyway, incorrect key, or bent key. | Check keyway for debris. Ensure it is the correct K134 key. Inspect key for damage. Do not force. |
| Key inserts but does not turn. | Incorrect key, worn lock mechanism, or internal obstruction. | Verify the lock code is K134. Apply a small amount of lock lubricant. If the issue persists, the lock mechanism may require professional attention. |
| కీ గట్టిగా లేదా తిప్పడానికి కష్టంగా ఉంది. | Lack of lubrication, minor debris, or slight misalignment. | Apply a graphite-based lock lubricant. Gently wiggle the key while turning. |
స్పెసిఫికేషన్లు
- బ్రాండ్: EasyKeys
- మోడల్ పేరు: K134
- అనుకూల తయారీదారులు: Kennedy (GCODE)
- Compatible Lock Series: K101 - K299
- మెటీరియల్: ఇత్తడి
- ప్రత్యేక ఫీచర్: Custom Cut Key, Durable
- అంశం కొలతలు (L x W x H): 0.5 x 0.5 x 1 అంగుళాలు
- వస్తువు బరువు: సుమారు 0.25 పౌండ్లు (4 ఔన్సులు)
మద్దతు మరియు సంప్రదించండి
For further assistance or inquiries regarding your EasyKeys K134 replacement key, please contact EasyKeys customer support through their official website or the platform where the purchase was made.
