MININGEEK GM100 మినీ PC కేస్ యూజర్ మాన్యువల్

1. పరిచయం

The MININGEEK GM100 is a compact 4.3L Mini PC case designed for small form factor (SFF) builds, ideal for HTPC (Home Theater PC) or business applications. This chassis supports ITX motherboards and Flex power supplies, offering a sleek and efficient solution for your computing needs. This manual provides detailed instructions for assembly, operation, and maintenance.

మూర్తి 1: ముందు view of the MININGEEK GM100 Mini PC Case.

2. ఉత్పత్తి లక్షణాలు

• కాంపాక్ట్ డిజైన్: Smaller than A4 paper, with dimensions of 205 x 232 millimeters on the side and 90 millimeters wide for a slim profile.
• మదర్‌బోర్డు అనుకూలత: Supports ITX motherboards.
• విద్యుత్ సరఫరా మద్దతు: Compatible with FLEX PSUs.
• ముందు I/O: Features 2x USB 3.0 front ports for convenient connectivity.
• గ్రాఫిక్స్ కార్డ్ మద్దతు: Accommodates single-fan graphics cards up to 185mm in length and 25mm in thickness (when CPU cooler height is less than 45mm). PCIe riser not included.
• CPU కూలర్ క్లియరెన్స్: 70mm ఎత్తు వరకు CPU కూలర్‌లకు మద్దతు ఇస్తుంది.
• ఆప్టిమైజ్ చేయబడిన వాయుప్రసరణ: Mesh panels with 0.8mm precision-machined holes facilitate air circulation for efficient component cooling.

3. స్పెసిఫికేషన్లు

Figure 2: GM100 Packing List and Specification Details.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Carefully follow these steps to assemble your MININGEEK GM100 Mini PC case. It is recommended to wear an anti-static wrist strap during installation to prevent damage to components.

4.1 అన్ప్యాకింగ్ మరియు ప్రారంభ తయారీ

Remove all components from the packaging. Verify that all parts listed in the packing list are present. Place the chassis on a stable, flat surface.

మూర్తి 3: ముందు view of the GM100 case.

4.2 Side Panel Removal

Unscrew the retaining screws on the rear of the chassis to remove the side panels. This will provide access to the interior for component installation.

చిత్రం 4: అంతర్గత view of the GM100 case with side panel removed.

4.3 మదర్బోర్డ్ సంస్థాపన

Install your Mini ITX motherboard into the chassis. Ensure proper alignment with the standoffs and secure it with the provided screws. Connect the front panel I/O cables (USB 3.0, power button, power LED) to the corresponding headers on the motherboard.

Figure 5: Illustrated guide for motherboard and power supply installation.

4.4 విద్యుత్ సరఫరా సంస్థాపన

Install the Flex ATX power supply into its designated rear-mount position. Secure it with screws. Connect the 24-pin ATX power connector and the 4/8-pin CPU power connector to the motherboard.

4.5 నిల్వ పరికర సంస్థాపన

Mount your 2.5-inch SSD or 3.5-inch HDD to the designated bracket within the chassis. Connect the SATA power and data cables to the drive and motherboard.

చిత్రం 6: వెనుక view of the GM100 case, illustrating power supply and I/O panel area.

4.6 Graphics Card Installation (Optional)

If installing a single-fan graphics card (up to 185mm length, 25mm thickness), carefully insert it into the PCIe slot. Ensure it is properly seated and secured. Note that a PCIe riser cable is not included and may be required depending on your motherboard and GPU configuration.

4.7 కేబుల్ నిర్వహణ

Organize all internal cables to ensure optimal airflow and prevent interference with components. Use cable ties if necessary to secure loose cables.

4.8 కేసును ముగించడం

Once all components are installed and cables are managed, reattach the side panels and secure them with the retaining screws.

4.9 ఇన్‌స్టాలేషన్ వీడియోలు

The following videos demonstrate general ITX case assembly principles that may be helpful during your MININGEEK GM100 installation:

5. ఆపరేటింగ్ సూచనలు

Once assembled, connect your monitor, keyboard, mouse, and power cable to the appropriate ports. Press the power button on the front panel to start your system. Refer to your motherboard and operating system manuals for specific boot-up and software configuration instructions.

6. నిర్వహణ

• శుభ్రపరచడం: Regularly clean the exterior of the case with a soft, dry cloth. For mesh panels, use compressed air to remove dust buildup. Ensure the system is powered off and unplugged before cleaning.
• గాలి ప్రవాహం: Keep the mesh panels clear of obstructions to maintain optimal airflow and cooling performance.
• కాంపోనెంట్ తనిఖీలు: Periodically check internal components for dust accumulation and ensure all connections are secure.

7. ట్రబుల్షూటింగ్

• సిస్టమ్ ఆన్ కావడం లేదు: Verify all power connections (24-pin ATX, 4/8-pin CPU, front panel power switch) are correctly seated. Ensure the power supply is switched on and connected to a working outlet.
• డిస్ప్లే అవుట్‌పుట్ లేదు: Check that the monitor is correctly connected to the graphics card or motherboard (if using integrated graphics) and that the monitor is powered on.
• వేడెక్కడం: Ensure proper cable management to avoid obstructing airflow. Verify that CPU cooler and any case fans are functioning correctly. Clean dust from mesh panels and heatsinks.
• వదులుగా ఉండే కనెక్షన్‌లు: If experiencing intermittent issues, power off the system and re-seat all internal cables (SATA, power, front panel).

8. వారంటీ మరియు మద్దతు

The MININGEEK GM100 Mini PC Case comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, technical support, or service inquiries, please refer to the MININGEEK official webమీ సైట్‌లో లేదా మీ రిటైలర్‌ను సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.