బ్రిటాక్స్ విల్లో బ్రూక్ ట్రావెల్ సిస్టమ్ యూజర్ మాన్యువల్

ముఖ్యమైన భద్రతా సమాచారం

Please read this entire manual carefully before assembling, installing, or using your Britax Willow Brook Travel System. Failure to follow these instructions could result in serious injury or death. Keep this manual in a safe place for future reference.

• Always secure your child in the car seat and stroller using the harness system.
• Never leave a child unattended in the car seat or stroller.
• Ensure all locking mechanisms are engaged before placing a child in the stroller or car seat.
• Do not use accessories or replacement parts other than those approved by Britax.
• నిర్దిష్ట కారు సీటు ఇన్‌స్టాలేషన్ సూచనలు మరియు సీటింగ్ స్థానాల కోసం మీ వాహనం యొక్క యజమాని మాన్యువల్‌ని చూడండి.

ఉత్పత్తి భాగాలు

The Britax Willow Brook Travel System includes the following main components:

• Britax Willow Infant Car Seat
• బ్రిటాక్స్ ఆస్పెన్ ఇన్ఫాంట్ కార్ సీట్ బేస్
• Britax Brook Baby Stroller

మూర్తి 1: పైగాview of the Britax Willow Brook Travel System, showing the Willow infant car seat, Brook stroller, and Aspen car seat base.

సెటప్ మరియు ఇన్‌స్టాలేషన్

1. Britax Aspen Infant Car Seat Base Installation

The Aspen Infant Car Seat Base features ClickTight technology for secure installation using either the vehicle seat belt or lower connectors (LATCH).

1. స్థానం: Place the Aspen base on the vehicle seat. Ensure it is level using the built-in level indicators. Adjust the spring-assist recline as needed to achieve the correct angle.
2. ClickTight Installation (Vehicle Seat Belt):
   • Open the ClickTight panel on the base.
   • Route the vehicle's lap and shoulder belt through the designated path.
   • సీటు బెల్ట్ కట్టుకోండి.
   • Remove all slack from the seat belt.
   • Close the ClickTight panel firmly until it clicks.
3. LATCH Installation (Lower Connectors):
   • Locate the lower anchor connectors on the base.
   • Attach the quick-push lower connectors to your vehicle's lower anchors. Ensure they click into place.
   • Tighten the LATCH strap to remove all slack.
   • Store unused lower connectors within the base.
4. భద్రత కోసం తనిఖీ చేయండి: After installation, firmly pull on the base at the belt path. It should not move more than one inch side-to-side or front-to-back.

మూర్తి 2: The Britax Aspen Infant Car Seat Base, showing the ClickTight installation area and level indicators.

మూర్తి 3: The underside of the Aspen base, illustrating the storage location for lower connectors when not in use.

2. Britax Willow Infant Car Seat Adjustment

The Willow car seat features the RightSize system for proper fit from 4 to 30 lbs.

• Adjust the harness straps to be at or just below your child's shoulders when rear-facing.
• Ensure the crotch buckle is positioned correctly to prevent slouching.
• Tighten the harness until it is snug against your child's body, with no slack. You should not be able to pinch any excess webభుజం మీద బింగ్.

3. Britax Brook Stroller Assembly

Refer to the separate assembly guide included with your Brook Stroller for detailed instructions on attaching wheels, canopy, and other components.

ఆపరేటింగ్ సూచనలు

1. Attaching the Willow Car Seat to the Brook Stroller

1. Ensure the Brook stroller is fully unfolded and locked in the open position.
2. Align the Willow car seat with the stroller's car seat adapters.
3. Lower the car seat onto the adapters until it clicks securely into place.
4. Gently pull up on the car seat to confirm it is properly attached before use.

మూర్తి 4: The Britax Willow infant car seat securely attached to the Brook stroller frame, ready for travel.

2. Stroller Modes (4 Ways to Stroll)

The Brook stroller offers four versatile ways to stroll, accommodating both infant car seats and reversible toddler seats.

• Infant Car Seat Facing Parent: Willow car seat attached to stroller, facing the parent.
• Infant Car Seat Facing Forward: Willow car seat attached to stroller, facing forward.
• Toddler Seat Facing Parent: Stroller seat installed, facing the parent.
• Toddler Seat Facing Forward: Stroller seat installed, facing forward.

మూర్తి 5: Visual representation of the four strolling configurations available with the Britax Brook stroller, demonstrating its versatility.

3. One-Step Stroller Fold

To fold the Brook stroller:

1. Ensure the stroller seat is in the forward-facing position (if attached).
2. Locate the one-step fold mechanism (refer to your stroller's specific instructions for exact location).
3. Activate the mechanism and push down/forward to collapse the stroller.
4. Ensure the stroller locks into its folded position.

నిర్వహణ మరియు సంరక్షణ

• శుభ్రపరిచే ఫాబ్రిక్: Spot clean fabric components with mild soap and cold water. Air dry. Do not use bleach.
• ఫ్రేమ్ శుభ్రపరచడం: Wipe the stroller frame and car seat shell with a damp గుడ్డ.
• చక్రాలు: Periodically check wheels for debris and ensure they rotate freely. Lubricate axles if necessary.
• జీను: Inspect harness straps regularly for wear or damage. Replace if necessary.
• నిల్వ: Store the travel system in a dry, cool place away from direct sunlight.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

• బ్రాండ్: బ్రిటాక్స్
• మోడల్: Willow Brook Travel System
• రంగు: Navy Glacier
• Car Seat Age/Weight Range: Rear-facing, 4 to 30 lbs
• Stroller Weight Capacity: 50 పౌండ్లు వరకు
• జీను రకం: 5-పాయింట్
• Installation Type (Base): LATCH or Vehicle Seat Belt (ClickTight)
• చేర్చబడిన భాగాలు: Britax Willow car seat, Aspen base, Brook baby stroller
• అదనపు ఫీచర్లు: ClickTight Technology, Reversible Seats, Four Ways to Stroll, One-step Fold, Water-resistant canopy, Parent cup holder, Child snack tray.

వారంటీ మరియు మద్దతు

వారంటీ సమాచారం, ఉత్పత్తి నమోదు లేదా కస్టమర్ మద్దతు కోసం, దయచేసి అధికారిక బ్రిటాక్స్‌ను సందర్శించండి webసైట్ లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

బ్రిటాక్స్ అధికారిక Webసైట్: us.britax.com