Vetroo SA-140 సిరీస్ PC కూలింగ్ ఫ్యాన్స్ యూజర్ మాన్యువల్

1. పరిచయం

Thank you for choosing Vetroo SA-140 Series PC Cooling Fans. This manual provides essential information for the proper installation, operation, and maintenance of your new cooling fans. Please read this manual thoroughly before installation and keep it for future reference.

ఉత్పత్తి లక్షణాలు:

• ARGB లైటింగ్: Synchronize RGB lighting with your motherboard via a standard 5V 3PIN ARGB header for customizable lighting effects.
• PWM స్మార్ట్ కంట్రోల్: Automatically adjusts fan speed based on chassis temperature for optimal cooling and energy efficiency.
• తక్కువ నాయిస్ ఆపరేషన్: Features nine fan blades and vibration-dampening rubber pads for quiet performance and excellent airflow.
• Controller and Remote Included: Allows for independent control of RGB lighting, effects, and fan speed.
• High-Performance Airflow: Operates at 1200±10% RPM to provide effective cooling for your PC case.

2. ప్యాకేజీ విషయాలు

దయచేసి మీ ప్యాకేజీలో అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి:

• Vetroo SA-140 140mm ARGB & PWM Fans (3x)
• Fan Controller Hub (1x)
• రిమోట్ కంట్రోల్ (1x)
• మౌంటు స్క్రూలు (12x)
• PWM Signal Cable (1x)
• ARGB Sync Cable (1x)
• SATA Power Cables (2x, integrated with controller)

Image: Contents of the Vetroo SA-140 3-Pack, including three fans, a controller hub, a remote control, and necessary cables.

3. భద్రతా సమాచారం

మీ పరికరాలకు గాయం మరియు నష్టాన్ని నివారించడానికి ఎల్లప్పుడూ క్రింది భద్రతా జాగ్రత్తలను గమనించండి:

• ఇన్‌స్టాలేషన్ లేదా నిర్వహణకు ముందు మీ కంప్యూటర్ సిస్టమ్ పవర్ ఆఫ్ చేయబడిందని మరియు వాల్ అవుట్‌లెట్ నుండి అన్‌ప్లగ్ చేయబడిందని నిర్ధారించుకోండి.
• స్టాటిక్ డిశ్చార్జ్‌ను నివారించడానికి భాగాలను జాగ్రత్తగా నిర్వహించండి. యాంటీ-స్టాటిక్ రిస్ట్ స్ట్రాప్‌ని ఉపయోగించడాన్ని పరిగణించండి.
• Do not force connectors. Ensure proper orientation before plugging in cables.
• Keep fans and cables away from moving parts inside the computer case.
• Do not attempt to disassemble or modify the fans or controller.
• This product is designed for use in computer systems. Do not use for other purposes.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to install your Vetroo SA-140 cooling fans:

1. మీ వ్యవస్థను సిద్ధం చేయండి: Power off your computer and unplug it from the power outlet. Open your PC case.
2. ఫ్యాన్లను అమర్చండి:

   Identify the desired fan mounting locations in your PC case (e.g., front, top, rear). Use the included mounting screws to secure each fan. Ensure the fan's airflow direction (indicated by arrows on the fan frame) is correct for your cooling setup (intake or exhaust).

   

   Image: Three Vetroo SA-140 fans showcasing their vibrant ARGB lighting.

   

   Image: Diagram illustrating the typical airflow direction through a PC fan, with arrows indicating air intake and exhaust.

3. Install the Controller Hub:

   Find a suitable location inside your PC case for the fan controller hub. It can be mounted using double-sided tape (not included) or placed in an accessible area. Ensure it's not obstructing airflow or other components.

   

   Image: The Vetroo fan controller hub, which manages fan power and RGB signals.

4. Connect the Fans to the Controller:

   Each fan has two cables: a 4-pin PWM cable and a 3-pin ARGB cable. Connect the 4-pin PWM cables from the fans to the "FAN-A" or "FAN-B" ports on the controller hub. Connect the 3-pin ARGB cables from the fans to the corresponding "ARGB-A" or "ARGB-B" ports on the controller hub.

   

   Image: Detailed diagram of the fan controller hub, showing ports for ARGB, PWM, SATA power, and motherboard connections.
5. Connect Controller to Power Supply:

   Connect the two SATA power cables from the controller hub to available SATA power connectors from your PC's power supply unit (PSU).

6. Connect Controller to Motherboard (Optional for Motherboard Sync):

   If you wish to synchronize the RGB lighting and fan speed with your motherboard, connect the following cables from the controller hub to your motherboard:

   • Connect the 4-pin PWM cable (labeled "PC IN PWM/FG" or similar) from the controller to a 4-pin CPU_FAN or SYS_FAN header on your motherboard. This allows the motherboard to control fan speed.
   • Connect the 3-pin ARGB cable (labeled "PC IN ARGB" or similar) from the controller to a 5V 3-pin Addressable RGB header on your motherboard. Do NOT connect to a 12V 4-pin RGB header, as this will damage the LEDs.
7. కేస్ మూసివేసి పవర్ ఆన్ చేయండి: అన్ని కనెక్షన్లు సురక్షితమైన తర్వాత, మీ PC కేసును మూసివేసి, పవర్ కేబుల్‌ను ప్లగ్ చేసి, మీ సిస్టమ్‌ను ఆన్ చేయండి.

5. ఆపరేటింగ్ సూచనలు

5.1. RGB లైటింగ్ నియంత్రణ

You can control the RGB lighting via the included remote control or through your motherboard's software (if connected to the motherboard ARGB header).

రిమోట్ కంట్రోల్ ఉపయోగించడం:

The remote control allows for various lighting modes, colors, and effects. Point the remote towards the controller hub for best results.

Image: Layout of the remote control with descriptions of each button's function, including power, speed, mode, luminosity, color shortcuts, and music modes.

• ఆన్/ఆఫ్ లైట్లు: Power button to turn RGB lights on or off.
• వేగం +/-: Adjusts the speed of dynamic lighting effects.
• మోడ్ +/-: Cycles through different lighting modes and effects.
• దానంతట అదే: Automatically cycles through all available modes.
• Luminosity Adjustment: Increases or decreases the brightness of the LEDs.
• Monochromatic Shortcut Keys (R, G, B, W): Directly select Red, Green, Blue, or White static colors.
• M/B (Motherboard/Controller Signal Switching):
  • When the controller is first connected to the 5V ARGB port of the motherboard, the light effect automatically switches to motherboard control.
  • Press the ON/OFF button on the remote for about 2 seconds; the fan LED will flash white once, and control will switch back to the motherboard.
• Music Mode 1, 2, 3: Activates lighting effects synchronized with audio (requires compatible setup, not all motherboards support this via controller).

Motherboard Software Control:

If you connected the 3-pin ARGB cable to your motherboard, you can use your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to control the fan lighting. Refer to your motherboard's manual for specific instructions on using its RGB software.

5.2. ఫ్యాన్ స్పీడ్ కంట్రోల్ (PWM)

The fans support PWM (Pulse Width Modulation) for precise speed control.

Image: Visual representation of PWM smart control, showing temperature and RPM gauges, indicating dynamic fan speed adjustment.

• Motherboard Control: If the controller's PWM cable is connected to your motherboard, the fan speed will be automatically adjusted by your motherboard based on CPU or system temperatures. You can configure fan curves in your motherboard's BIOS/UEFI settings or through its fan control software.
• Controller Control: If not connected to the motherboard's PWM header, the controller may operate the fans at a default speed or allow limited speed adjustment via the remote (if applicable, refer to remote diagram).

6. నిర్వహణ

Regular maintenance ensures optimal performance and longevity of your cooling fans:

• శుభ్రపరచడం: Periodically clean dust from the fan blades and frames using compressed air or a soft, dry cloth. Ensure the system is powered off and unplugged before cleaning.
• తనిఖీ: కేబుల్స్ ఏవైనా అరిగిపోయిన లేదా దెబ్బతిన్న సంకేతాల కోసం తనిఖీ చేయండి. అన్ని కనెక్షన్లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.
• Vibration Pads: Verify that the anti-vibration rubber pads on the fan corners are intact and properly seated to minimize noise.

7. ట్రబుల్షూటింగ్

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

Vetroo products are designed and manufactured to the highest quality standards. For warranty information and technical support, please visit the official Vetroo webసైట్ లేదా వారి కస్టమర్ సేవా విభాగాన్ని సంప్రదించండి.

Vetroo Official Webసైట్: Vetroo Store on Amazon

వారంటీ క్లెయిమ్‌ల కోసం దయచేసి మీ కొనుగోలు రుజువును ఉంచుకోండి.