BN-LINK 24-Hour Plug-in Mechanical Timer

1. ఉత్పత్తి ముగిసిందిview

The BN-LINK 24-Hour Plug-in Mechanical Timer is designed to automate the operation of various indoor electrical devices. It features a simple mechanical dial with 15-minute intervals, allowing for precise scheduling of ON/OFF cycles over a 24-hour period. This heavy-duty timer is ETL listed, ensuring safety and reliability for a wide range of applications.

Image 1: BN-LINK 24-Hour Plug-in Mechanical Timer, front view.

2. ఉత్పత్తి లక్షణాలు

• ప్రోగ్రామబుల్ షెడ్యూల్: Offers 96 ON/OFF settings within 24 hours, with each push pin representing a 15-minute interval.
• దృశ్య సూచిక: A red signal light clearly indicates when the device is powered.
• సాధారణ ఆపరేషన్: Pins UP means the timer is OFF, and pins DOWN means ON.
• మోడ్ ఎంపిక: Features a slide switch to select between 'ON' (continuous power) and 'TIMER' (scheduled operation) modes.
• బహుముఖ అనుకూలత: The three-hole grounded outlet is compatible with both two-prong and three-prong plugs.
• హెవీ డ్యూటీ డిజైన్: Suitable for automating lamps, Christmas lights, fans, humidifiers, coffee machines, aquariums, grow lights, and other indoor electrical devices.
• భద్రత ధృవీకరించబడింది: ETL approved for safety.

3. భద్రతా సమాచారం

This BN-LINK heavy-duty grounded timer is ETL approved, ensuring it meets recognized safety standards. It is rated for 125VAC, 60Hz, with a maximum load of 1875W, 15A Resistive, 8A Tungsten, and 1/2 HP, TV-5. Always ensure that the total wattage of connected devices does not exceed the timer's maximum load capacity to prevent overheating and potential hazards. Use only with grounded outlets.

4. సెటప్

1. Reset Pins: Before setting up, ensure all the black push pins around the dial are in the UP position. This sets the timer to an 'OFF' state for all intervals initially.
2. ప్రస్తుత సమయాన్ని సెట్ చేయండి: Rotate the entire black dial clockwise until the arrow on the timer aligns with the current time. The dial is marked with AM/PM hours.
3. కార్యక్రమం ఆన్/ఆఫ్ సమయాలు: Push down the black pins corresponding to the desired ON periods. Each pin represents 15 minutes. For example, to turn a device ON from 6 PM to 10 PM, push down all pins between the 6 PM and 10 PM marks. Pins in the UP position indicate OFF periods.
4. ఆపరేటింగ్ మోడ్‌ని ఎంచుకోండి: Use the red slide switch on the side of the timer. Slide it to the 'TIMER' position (indicated by a clock icon) for automatic scheduled operation. If you wish to bypass the timer and keep the connected device continuously ON, slide the switch to the 'ON' position.
5. ప్లగ్ ఇన్: Plug the timer into a standard 3-prong wall outlet. Then, plug your device into the timer's grounded outlet.

Image 2: Visual guide for setting ON/OFF pins and current time.

5. ఆపరేటింగ్ సూచనలు

Once the timer is plugged in and the current time is set, the dial will continuously rotate clockwise. When the rotating dial reaches a segment where pins are pushed DOWN (ON position), the connected device will receive power. When it reaches a segment where pins are UP (OFF position), power to the device will be cut off. The red indicator light on the timer will illuminate when power is being supplied to the connected device.

Image 3: Diagram illustrating the various components of the timer, including the clock dial, push pins, and slide switch.

చిత్రం 4: ముగిసిందిview of the timer's scheduling capabilities: 1 grounded outlet, 15-minute intervals, 24-hour programmable, 96 ON/OFF settings.

6. నిర్వహణ

To ensure optimal performance and longevity of your BN-LINK Mechanical Timer, follow these simple maintenance guidelines:

• శుభ్రపరచడం: శుభ్రపరిచే ముందు పవర్ అవుట్‌లెట్ నుండి టైమర్‌ను డిస్‌కనెక్ట్ చేయండి. బాహ్య భాగాన్ని తుడవడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి. ద్రవ క్లీనర్‌లను లేదా రాపిడి పదార్థాలను ఉపయోగించవద్దు.
• నిల్వ: ఎక్కువసేపు ఉపయోగంలో లేనప్పుడు, టైమర్‌ను ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
• తనిఖీ: Periodically inspect the timer and its plug for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately and replace the unit.

7. ట్రబుల్షూటింగ్

If your BN-LINK Mechanical Timer is not functioning as expected, consider the following:

• Device Not Turning ON/OFF:
  • Ensure the timer is securely plugged into a working wall outlet.
  • Verify that the connected appliance is properly plugged into the timer and is functional.
  • Check the red slide switch on the side of the timer. It must be in the 'TIMER' position for scheduled operation. If it's in 'ON', the device will be continuously powered.
  • Confirm that the black push pins are correctly set for the desired ON/OFF periods. Pins pushed DOWN correspond to ON times.
  • Ensure the current time on the dial is accurately aligned with the arrow.
• టైమర్ ముందుకు సాగడం లేదు: Ensure the timer is plugged into a live outlet. The internal clock mechanism requires power to operate.
• వేడెక్కడం: If the timer feels hot, immediately unplug it and the connected device. Ensure the total wattage of connected devices does not exceed the timer's maximum load capacity (1875W).

8. స్పెసిఫికేషన్లు

Image 5: Detailed electrical ratings and physical dimensions of the timer.

9. పెట్టెలో ఏముంది

• 1 x BN-LINK 24-Hour Plug-in Mechanical Timer

10. వారంటీ మరియు మద్దతు

For warranty information or technical support regarding your BN-LINK 24-Hour Plug-in Mechanical Timer, please refer to the product packaging or contact BN-LINK customer service directly. Contact details can typically be found on the manufacturer's official webసైట్ లేదా ఉత్పత్తి యొక్క రిటైల్ పేజీలో.