1. పరిచయం
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TC-SP 204/2 Stationary Planer Thicknesser. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
Figure 1.1: Einhell TC-SP 204/2 Stationary Planer Thicknesser, front view.
2. భద్రతా సూచనలు
విద్యుత్ షాక్, అగ్ని ప్రమాదం మరియు తీవ్రమైన గాయం ప్రమాదాన్ని తగ్గించడానికి ఎల్లప్పుడూ క్రింది భద్రతా జాగ్రత్తలను గమనించండి.
- మాన్యువల్ చదవండి: Familiarize yourself with all instructions and warnings before operation.
- పని ప్రాంతం: మీ పని ప్రాంతాన్ని శుభ్రంగా, బాగా వెలుతురు వచ్చేలా మరియు గజిబిజి లేకుండా ఉంచండి. మండే ద్రవాలు, వాయువులు లేదా ధూళి వంటి పేలుడు వాతావరణాలలో పనిచేయవద్దు.
- విద్యుత్ భద్రత: Ensure the power supply matches the machine's requirements. Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
- వ్యక్తిగత భద్రత: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and dust masks. Do not wear loose clothing or jewelry.
- మెషిన్ ఆపరేషన్: Do not force the machine. Use the correct machine for your application. Ensure the workpiece is properly supported. Never reach into the machine while it is running.
- నిర్వహణ: Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the machine.
- వైబ్రేషన్ డిamping: The machine is equipped with vibration-damping feet to enhance stability and reduce operational vibration. Ensure these feet are properly positioned on a stable surface.
Figure 2.1: Illustration of vibration damping feet for enhanced stability.
3. భాగాలు మరియు లక్షణాలు
The Einhell TC-SP 204/2 is designed for both planing and thicknessing operations, offering robust performance and user-friendly features.
ముఖ్య లక్షణాలు:
- శక్తివంతమైన మోటార్: Equipped with a 1500-watt motor for efficient planing and thicknessing.
- Thicknessing Capability: Suitable for thicknessing smaller beams and boards with an extendable outfeed support, a passage width of 204 mm, and a passage height of 120 mm.
- Precise Height Adjustment: Material removal can be finely adjusted with a crank up to a maximum of 3 mm during planing and 2 mm during thicknessing.
- Stable Planing Table: Features a stable, solid aluminum planing table for flat planing results.
- Sharp Planer Blades: Comes with two sharp planer blades ensuring perfect planing quality and smooth surfaces.
- Efficient Dust Extraction: Includes a Ø 100 mm extraction connection for mounting suitable chip extraction equipment, maintaining a clean workstation.
- మెరుగైన భద్రత: Incorporates vibration-damping feet, a zero-voltage switch, and thermal overload protection for maximum operational safety.
భాగం ముగిసిందిview:
చిత్రం 3.1: వెనుక view showing integrated power cord storage.
Figure 3.2: Adjusting the planing width for various workpiece sizes.
Figure 3.3: Adjusting the thicknessing height for precise material removal.
Figure 3.4: Connection point for dust extraction system.
మూర్తి 3.5: వివరంగా view of the Ø 100 mm dust extraction port.
Figure 3.6: User demonstrating the operation of the Einhell planer thicknesser.
4. సెటప్
Before first use, ensure the machine is properly assembled and positioned.
- అన్ప్యాకింగ్: ప్యాకేజింగ్ నుండి అన్ని భాగాలను జాగ్రత్తగా తొలగించండి. ఏదైనా షిప్పింగ్ నష్టం కోసం తనిఖీ చేయండి.
- అసెంబ్లీ: Follow the assembly instructions provided in the separate assembly guide (if applicable) for attaching components such as the outfeed support and dust extraction adapter.
- స్థానం: Place the planer thicknesser on a stable, level surface capable of supporting its weight (23.9 kg) and the workpiece. Ensure adequate space around the machine for safe operation and material handling.
- పవర్ కనెక్షన్: Connect the machine to a grounded AC power outlet that matches the voltage and frequency specified on the machine's rating plate.
- దుమ్ము తొలగింపు వ్యవస్థ: Attach a suitable dust extraction system to the Ø 100 mm connection port. This is crucial for maintaining a clean work environment and for the machine's proper function.
5. ఆపరేటింగ్ సూచనలు
This section details the procedures for both planing and thicknessing operations.
5.1 సాధారణ ఆపరేషన్
- Always ensure the workpiece is free of nails, screws, or other foreign objects that could damage the blades.
- Use a push stick or sliding block when feeding small workpieces to maintain a safe distance from the blades.
- Never attempt to plane or thickness material that is too short or too thin to be safely controlled.
5.2 Planing Operation
- Adjust the planing table to the desired depth of cut using the crank. The maximum material removal for planing is 3 mm per pass.
- Ensure the fence is set to the desired angle (typically 90 degrees for square edges).
- Turn on the machine. Allow the motor to reach full speed before feeding the workpiece.
- Feed the workpiece smoothly and consistently across the planing table, maintaining firm pressure against the fence and table.
5.3 మందం ఆపరేషన్
- Adjust the thicknessing table to the desired thickness using the crank. The maximum material removal for thicknessing is 2 mm per pass.
- Ensure the outfeed support is extended if necessary for longer workpieces.
- యంత్రాన్ని ఆన్ చేయండి.
- Feed the workpiece into the thicknesser opening. The machine's feed rollers will pull the material through.
- Catch the workpiece as it exits the machine.
6. నిర్వహణ
Regular maintenance ensures the longevity and optimal performance of your planer thicknesser.
- శుభ్రపరచడం: After each use, disconnect the machine from power and clean off all sawdust and chips, especially from the tables, blades, and dust extraction port. Use a brush or compressed air.
- బ్లేడ్ తనిఖీ మరియు భర్తీ: Regularly inspect the planer blades for sharpness and damage. Dull or chipped blades can lead to poor results and increased motor strain. Refer to the separate blade replacement instructions for safe blade changes. Always use genuine Einhell replacement blades.
- Table Lubrication: Periodically apply a thin coat of dry lubricant (e.g., silicone spray or paste wax) to the planing and thicknessing tables to ensure smooth feeding of workpieces.
- సాధారణ తనిఖీ: Check all nuts, bolts, and screws for tightness. Tighten as necessary.
7. ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with your planer thicknesser.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| యంత్రం ప్రారంభం కాదు | No power supply; Zero-voltage switch activated; Thermal overload protection activated; Dust extraction not connected. | Check power connection; Reset zero-voltage switch; Allow machine to cool down; Ensure dust extraction is properly connected. |
| Poor planing/thicknessing quality (e.g., uneven surface, tear-out) | Dull or damaged blades; Incorrect depth of cut; Workpiece fed too fast; Tables not aligned. | Replace or sharpen blades; Reduce depth of cut; Feed workpiece slower; Check and adjust table alignment (refer to service manual). |
| అధిక కంపనం లేదా శబ్దం | Loose components; Damaged blades; Unstable mounting. | Check and tighten all fasteners; Inspect and replace damaged blades; Ensure machine is on a stable surface. |
| Dust/chips not being extracted | Dust extraction system clogged or not connected properly; Extraction port blocked. | Clear clogs in hose/system; Ensure secure connection; Clear any blockages in the machine's extraction port. |
8. స్పెసిఫికేషన్లు
| గుణం | విలువ |
|---|---|
| తయారీదారు | ఐన్హెల్ |
| మోడల్ సంఖ్య | 4419952 |
| ఉత్పత్తి కొలతలు (L x W x H) | 35 x 45.5 x 44.5 సెం.మీ |
| ఉత్పత్తి బరువు | 23.9 కిలోలు |
| రంగు | ఎరుపు, నలుపు |
| శైలి | మోడల్ 2024 |
| మెటీరియల్ | మెటల్, అల్యూమినియం |
| శక్తి మూలం | AC |
| మోటార్ పవర్ | 1500 W |
| లోడ్ లేని వేగం | 9000 rpm |
| ప్లానింగ్ వెడల్పు | 204 మి.మీ |
| Passage Height (Thicknessing) | 120 మి.మీ |
| Max. Material Removal (Planing) | 3 మి.మీ |
| Max. Material Removal (Thicknessing) | 2 మి.మీ |
| దుమ్ము వెలికితీత కనెక్షన్ | Ø 100 మిమీ |
| భాగాలు చేర్చబడ్డాయి | Stationary planer, extraction adapter, push stick, sliding block, blade adjustment blocks |
9. వారంటీ మరియు మద్దతు
వారంటీ సమాచారం కోసం, దయచేసి మీ ఉత్పత్తితో చేర్చబడిన వారంటీ కార్డును చూడండి లేదా అధికారిక ఐన్హెల్ను సందర్శించండి. website. For technical support, spare parts, or service inquiries, please contact Einhell customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.
ఐన్హెల్ అధికారిక Webసైట్: www.einhell.com
