Z-Lite 1011-18W-BN-LED

Z-Lite 1011-18W-BN-LED హారిసన్ వానిటీ లైట్ యూజర్ మాన్యువల్

Model: 1011-18W-BN-LED

పరిచయం

Thank you for choosing the Z-Lite 1011-18W-BN-LED Harrison Vanity Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Z-Lite 1011-18W-BN-LED Harrison Vanity Light, Brushed Nickel finish with frosted glass diffusers.

Image: Z-Lite 1011-18W-BN-LED Harrison Vanity Light in Brushed Nickel.

భద్రతా సమాచారం

హెచ్చరిక: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).

  • ఇన్‌స్టాలేషన్ ప్రక్రియ గురించి మీకు ఖచ్చితంగా తెలియకుంటే, అర్హత కలిగిన ఎలక్ట్రీషియన్‌ని సంప్రదించండి.
  • ఫిక్చర్ సరిగ్గా గ్రౌండ్ చేయబడిందని నిర్ధారించుకోండి.
  • ఈ ఫిక్చర్‌ను తడి ప్రదేశాలలో ఇన్‌స్టాల్ చేయవద్దు. ఇది ఇండోర్ ఉపయోగం కోసం మాత్రమే రూపొందించబడింది.
  • Handle the fixture with care to avoid damage to the LED components or glass.
  • ప్రతిపాదన 65 హెచ్చరిక: ఈ ఉత్పత్తి క్యాన్సర్ మరియు పుట్టుకతో వచ్చే లోపాలు లేదా ఇతర పునరుత్పత్తి హాని కలిగించే కాలిఫోర్నియా రాష్ట్రానికి తెలిసిన రసాయనాలకు మిమ్మల్ని గురిచేయవచ్చు. మరిన్ని వివరాల కోసం, ఇక్కడకు వెళ్ళండి www.P65Warnings.ca.gov.

ప్యాకేజీ విషయాలు

Carefully unpack your fixture and inspect for any damage. Keep all packaging materials until you are sure all parts are present and in good condition.

  • Harrison Vanity Light Fixture
  • Mounting Hardware Kit (mounting plate, screws, wire nuts)
  • ఇన్స్ట్రక్షన్ మాన్యువల్

ఇన్స్టాలేషన్ సూచనలు

మీరు ప్రారంభించే ముందు

  1. Turn off the electrical power at the main fuse box or circuit breaker.
  2. Remove the old fixture (if applicable) and its mounting hardware.
  3. Carefully unpack the new fixture and lay out all parts on a clean, flat surface.

ఫిక్స్చర్ను మౌంట్ చేస్తోంది

  1. అందించిన మౌంటు స్క్రూలను ఉపయోగించి మౌంటు ప్లేట్‌ను జంక్షన్ బాక్స్‌కు అటాచ్ చేయండి. ప్లేట్ సురక్షితంగా బిగించబడిందని నిర్ధారించుకోండి.
  2. విద్యుత్ వైర్లను కనెక్ట్ చేయండి:
    • Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
    • Connect the white wire from the fixture to the white (neutral) wire from the junction box. Secure with a wire nut.
    • Connect the black wire from the fixture to the black (hot) wire from the junction box. Secure with a wire nut.
    అన్ని వైర్ కనెక్షన్లు గట్టిగా మరియు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.
  3. జంక్షన్ బాక్స్‌లో అన్ని వైర్లను జాగ్రత్తగా టక్ చేయండి.
  4. Align the fixture with the mounting plate and secure it using the provided fixture screws.
  5. సర్క్యూట్ బ్రేకర్ వద్ద పవర్ పునరుద్ధరించండి మరియు ఫిక్చర్‌ను పరీక్షించండి.
Diagram showing the dimensions and mounting points of the Z-Lite Harrison Vanity Light.

Image: Dimensional diagram of the Z-Lite Harrison Vanity Light.

ఆపరేటింగ్ సూచనలు

Once installed, the Z-Lite Harrison Vanity Light operates like any standard wall-mounted light fixture. Simply use the wall switch connected to the fixture to turn it on or off. This fixture uses integrated LED lighting, which does not require bulb replacement.

సంరక్షణ మరియు నిర్వహణ

To maintain the appearance and performance of your Z-Lite Harrison Vanity Light, follow these simple guidelines:

  • శుభ్రపరచడం: Always disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
  • LED సంరక్షణ: The integrated LED light source is designed for long-lasting performance and does not require replacement. Do not attempt to disassemble or replace the LED components.

ట్రబుల్షూటింగ్

If your fixture is not functioning correctly, refer to the table below for common issues and solutions.

సమస్యసాధ్యమైన కారణంపరిష్కారం
లైట్ ఆన్ చేయదు.ఫిక్చర్‌కు శక్తి లేదు.సర్క్యూట్ బ్రేకర్ లేదా ఫ్యూజ్‌ని తనిఖీ చేయండి. వాల్ స్విచ్ 'ఆన్' స్థానంలో ఉందని నిర్ధారించుకోండి.
వదులుగా ఉండే వైర్ కనెక్షన్లు.Turn off power, check all wire connections for tightness.
Fixture is flickering.వదులుగా ఉండే వైర్ కనెక్షన్లు.Turn off power, check all wire connections for tightness.
Incorrect dimmer switch.Ensure you are using an LED-compatible dimmer switch if applicable.

ఉత్పత్తి లక్షణాలు

ఫీచర్వివరాలు
మోడల్ పేరు1011-18W-BN-LED
బ్రాండ్Z- లైట్
రంగుSilver (Brushed Nickel)
మెటీరియల్మిశ్రమం ఉక్కు
శైలిహారిసన్
ఉత్పత్తి కొలతలు18"లీ x 4"వా x 4.75"హ
వస్తువు బరువు2 పౌండ్లు
శక్తి మూలంకార్డెడ్ ఎలక్ట్రిక్
కాంతి మూలం రకంLED (ఇంటిగ్రేటెడ్)
వాట్tage20 వాట్స్
వాల్యూమ్tage120 వోల్ట్లు
ఇండోర్/అవుట్‌డోర్ వినియోగంఇండోర్
మౌంటు రకంపరిసర లైటింగ్
UPC685659192728

వారంటీ సమాచారం

This Z-Lite product is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your purchase or visit the official Z-Lite website for detailed terms and conditions regarding coverage, duration, and claims process. Retain your proof of purchase for warranty service.

కస్టమర్ మద్దతు

For technical assistance, missing parts, or any questions regarding your Z-Lite Harrison Vanity Light, please contact Z-Lite customer support:

  • Webసైట్: Visit the official Z-Lite webమద్దతు వనరులు మరియు సంప్రదింపు సమాచారం కోసం సైట్.
  • ఇమెయిల్/ఫోన్: Refer to the contact details provided on the Z-Lite webసైట్ లేదా మీ ఉత్పత్తి ప్యాకేజింగ్‌లో.

సంబంధిత పత్రాలు - 1011-18W-BN-LED

ముందుగాview Z-Lite 522S-BK/522M-BK అవుట్‌డోర్ వాల్ స్కోన్స్ అసెంబ్లీ మరియు ఇన్‌స్టాలేషన్ సూచనలు
Z-Lite 522S-BK మరియు 522M-BK అవుట్‌డోర్ వాల్ స్కోన్స్‌ను అసెంబుల్ చేయడం మరియు ఇన్‌స్టాల్ చేయడం కోసం సమగ్ర గైడ్. భద్రతా హెచ్చరికలు, దశల వారీ సూచనలు మరియు భాగాల గుర్తింపును కలిగి ఉంటుంది.
ముందుగాview Z-27UJRBNU-4635 లైట్ ఫిక్చర్ ఇన్‌స్టాలేషన్ గైడ్ - Z-Lite
Z-Lite Z-27UJRBNU-4635 లైట్ ఫిక్చర్ కోసం వివరణాత్మక ఇన్‌స్టాలేషన్ సూచనలు మరియు భద్రతా హెచ్చరికలు. విడిభాగాల జాబితా, అసెంబ్లీ దశలు, వైరింగ్ గైడ్ మరియు శుభ్రపరిచే సిఫార్సులను కలిగి ఉంటుంది.
ముందుగాview Z-Lite 651P-11R ఆర్డెన్ 11-లైట్ లాకెట్టు ఇన్‌స్టాలేషన్ మరియు భద్రతా సూచనలు
Z-Lite 651P-11R ఆర్డెన్ 11-లైట్ పెండెంట్ కోసం సమగ్ర ఇన్‌స్టాలేషన్ మరియు భద్రతా గైడ్. దశల వారీ అసెంబ్లీ, వైరింగ్ సూచనలు, భద్రతా హెచ్చరికలు, శుభ్రపరిచే చిట్కాలు మరియు విడిభాగాల ఆర్డర్ సమాచారాన్ని కలిగి ఉంటుంది.
ముందుగాview Z-Lite 495P24/495P32 లైటింగ్ ఫిక్చర్ ఇన్‌స్టాలేషన్ మరియు భద్రతా సూచనలు
Z-Lite 495P24 మరియు 495P32 లైటింగ్ ఫిక్చర్‌ల కోసం వివరణాత్మక ఇన్‌స్టాలేషన్ మరియు భద్రతా గైడ్, అసెంబ్లీ, వైరింగ్, గ్రౌండింగ్ మరియు తుది సెటప్‌ను కవర్ చేస్తుంది.
ముందుగాview Z-లైట్ కాడెన్ షాన్డిలియర్ ఇన్‌స్టాలేషన్ మరియు భద్రతా సూచనలు
Z-Lite Kaden Chandelier (మోడల్ 3045-12) ను ఇన్‌స్టాల్ చేయడానికి సమగ్ర గైడ్, ఇందులో భద్రతా జాగ్రత్తలు, అసెంబ్లీ దశలు, వైరింగ్ సూచనలు మరియు శుభ్రపరిచే సిఫార్సులు ఉన్నాయి.
ముందుగాview Z-లైట్ లారెంట్ అవుట్‌డోర్ పియర్ మౌంటెడ్ ఫిక్చర్ ఇన్‌స్టాలేషన్ గైడ్
Z-Lite Laurent అవుట్‌డోర్ పియర్ మౌంటెడ్ లైటింగ్ ఫిక్చర్ కోసం సమగ్ర ఇన్‌స్టాలేషన్ మరియు ఆపరేషన్ సూచనలు, భద్రతా హెచ్చరికలు, అసెంబ్లీ దశలు, విద్యుత్ కనెక్షన్‌లు మరియు నిర్వహణ చిట్కాలతో సహా.