పరిచయం
ధన్యవాదాలు, ధన్యవాదాలు.asing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.
ప్యాకేజీ విషయాలు
క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని ధృవీకరించండి:
- Mytrix M16 Leverless Arcade Controller
- USB-C కేబుల్
- కీకాప్ పుల్లర్
- వినియోగదారు మాన్యువల్
- Extra Low Profile Red Switches (x2)
- Extra Keycaps (x2)
Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.
సెటప్ మరియు అనుకూలత
The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.
సిస్టమ్ అవసరాలు
- PC: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
- కన్సోల్లు: PS3, PS4, నింటెండో స్విచ్
- Mobile/Other: Android, iPadOS, MacOS
- గమనిక: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).
Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).
ప్రారంభ కనెక్షన్
- Connect the provided USB-C cable to the controller's USB-C port.
- Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
- The controller should be automatically recognized by most compatible systems.
ఆపరేటింగ్ సూచనలు
The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.
నియంత్రణ మోడ్లు
The controller supports multiple input modes:
- X-ఇన్పుట్ మోడ్
- స్విచ్ మోడ్
- PS3/D-input mode
- PS4 మోడ్
- కీబోర్డ్ మోడ్
Button Layout and Key Values
Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.
Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.
ప్రత్యేక విధులు
- టర్బో ఫంక్షన్: Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
- SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web ఇంటర్ఫేస్.
- M1/M2 Custom Buttons: Two customizable buttons for advanced control.
RGB లైటింగ్
The controller features customizable RGB lighting with 4 preset modes.
Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.
Custom RGB Lighting Controls
Adjust RGB lighting using the following button combinations:
- SELECT + START + X: Next Animation
- SELECT + START + Y: Previous Animation
- SELECT + START + A: ప్రకాశం పెరుగుతుంది
- SELECT + START + B: ప్రకాశం తగ్గిపోయింది
- SELECT + START + RB: LED Parameter Up
- SELECT + START + RT: LED Parameter Down
- SELECT + START + LB: Pressed Parameter Up
- SELECT + START + LT: Pressed Parameter Down
Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.
నిర్వహణ మరియు అనుకూలీకరణ
The Mytrix M16 is designed for easy maintenance and extensive customization.
హాట్-స్వాప్ చేయగల స్విచ్లు
The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.
- స్విచ్ రకం: గేటెరాన్ లో ప్రోfile రెడ్ స్విచ్లు
- జీవితకాలం: 50 మిలియన్
- యాక్చుయేషన్ ఫోర్స్: సుమారు 45గ్రా
- ప్రయాణ దూరం: 3.2మి.మీ
- యాక్చుయేషన్ పాయింట్: 1.5మి.మీ
చిత్రం: క్లోజప్ view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.
Detachable 7-Layer Design
The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.
చిత్రం: పేలింది view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.
DIY Screen & Artwork Support
Personalize your controller with custom artwork and screen displays.
చిత్రం: ఉదాamples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.
జనరల్ క్లీనింగ్
To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.
ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with your Mytrix M16 controller.
కనెక్టివిటీ సమస్యలు
- Controller not detected: Ensure the USB-C cable is securely connected to both the controller and the device. Try a different USB port or cable.
- No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web కాన్ఫిగరేటర్.
Web Configuration Access
The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.
- పట్టుకోండి START button while plugging the device into your computer.
- The controller should enter a special mode, often displaying an IP address on its small screen.
- తెరవండి a web browser on your computer and navigate to the displayed IP address.
- If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.
Double Inputs or Unresponsive Buttons
- Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
- స్పందించని బటన్లు: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.
ఫర్మ్వేర్ నవీకరణలు
Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.
- నవీకరించడానికి ముందు: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
- Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
- Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | M16 |
| కొలతలు (L x W x H) | 27 సెం.మీ x 20 సెం.మీ x 1 సెం.మీ (10.63" x 7.87" x 0.39") |
| బరువు | 1.92 పౌండ్లు (సుమారు 0.87 కిలోలు) |
| చిప్సెట్ | GP-2040-CE (40nm process technology) |
| జాప్యం | 1ms కంటే తక్కువ |
| స్విచ్లు | గేటెరాన్ లో ప్రోfile Red Switches (Hot-swappable) |
| RGB లైటింగ్ | 4 preset modes, customizable colors |
| అనుకూలీకరణ | 7-layer detachable design, DIY artwork support |
| నియంత్రణ మోడ్లు | X-input, Switch, PS3/D-input, PS4, Keyboard |
| ప్రత్యేక లక్షణాలు | Turbo function, SOCD cleaning, M1/M2 custom buttons, embedded web ఆకృతీకరణ |
Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.
వారంటీ మరియు మద్దతు
Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.
- కస్టమర్ సేవ: Refer to the Mytrix official website or your purchase platform for contact information.
- వారంటీ: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.
