REL అకౌస్టిక్స్ T/9x

REL T/9x 10-Inch Powered Subwoofer

ఇన్స్ట్రక్షన్ మాన్యువల్

మోడల్: T/9x | బ్రాండ్: REL అకౌస్టిక్స్

పరిచయం

The REL T/9x 10-Inch Powered Subwoofer is engineered to deliver deep, controlled bass and enhance the overall audio experience for both HiFi stereo systems and home theater setups. Featuring a sealed design with a Class A/B amplifier, this subwoofer is designed for seamless integration and optimal performance in various listening environments.

This manual provides essential information for the proper setup, operation, and maintenance of your REL T/9x subwoofer. Please read it thoroughly before use to ensure safe and effective operation.

భద్రతా సమాచారం

Please observe the following safety precautions to prevent damage to the unit and ensure your personal safety:

సెటప్

అన్‌ప్యాకింగ్ మరియు ప్లేస్‌మెంట్

Carefully remove the REL T/9x subwoofer from its packaging. Inspect the unit for any signs of damage. The T/9x is designed for floor standing placement.

REL T/9x Subwoofer, front view, high gloss grey finish

మూర్తి 1: ముందు view of the REL T/9x Subwoofer in high gloss grey finish. This image shows the 10-inch front-firing driver and the sleek, sealed cabinet design.

కనెక్షన్లు

The REL T/9x offers versatile connection methods to integrate seamlessly into your audio system. The rear panel provides various input options.

REL T/9x Subwoofer rear panel with input connections

Figure 2: Rear panel of the REL T/9x Subwoofer, displaying the various input terminals and controls. This includes High/Low Level inputs, Crossover, and Phase controls.

  1. High-Level Connection (Recommended for Music):
    • Use the included high-level speaker wire.
    • Connect the bare wire ends to the corresponding speaker terminals on your amplifier (Left, Right, and Ground).
    • Connect the Speakon connector to the "HIGH LEVEL INPUT" on the subwoofer's rear panel.
    • This connection method ensures the subwoofer receives the same sonic signature as your main speakers, leading to better integration.
  2. Low-Level Connection (Recommended for Home Theater LFE):
    • Use a single RCA cable (not included).
    • Connect one end of the RCA cable to the LFE output of your AV receiver or processor.
    • Connect the other end to the "LOW .1/LFE INPUT" on the subwoofer's rear panel.
    • For stereo low-level connection, use two RCA cables (not included) to connect to the "LOW LEVEL INPUT" (left and right) from your pre-ampజీవనాధారం లేదా మూలం.
  3. పవర్ కనెక్షన్:
    • Connect the power cord to the AC inlet on the rear panel of the subwoofer.
    • Plug the other end into a suitable wall outlet.

Operating the REL T/9x

ప్రారంభ పవర్ ఆన్

After making all connections, switch the power toggle on the rear panel to the "ON" position. The power indicator light will illuminate.

సెట్టింగ్‌లను సర్దుబాటు చేస్తోంది

The REL T/9x features controls on the rear panel for fine-tuning its performance to your listening environment and preferences:

For optimal performance, it is recommended to adjust these settings while listening to familiar music or movie scenes to achieve a balanced and integrated sound.

నిర్వహణ

To ensure the longevity and optimal performance of your REL T/9x subwoofer, follow these simple maintenance guidelines:

ట్రబుల్షూటింగ్

If you encounter issues with your REL T/9x subwoofer, refer to the following common troubleshooting steps:

సమస్య సాధ్యమైన కారణం పరిష్కారం
సౌండ్ లేదు
  • విద్యుత్ సరఫరా లేదు లేదా ఆపివేయబడలేదు.
  • ఇన్‌పుట్ కేబుల్స్ వదులుగా లేదా తప్పుగా ఉన్నాయి.
  • వాల్యూమ్ చాలా తక్కువ.
  • ప్రధాన amplifier/receiver settings.
  • పవర్ కార్డ్ మరియు స్విచ్‌ను తనిఖీ చేయండి.
  • Verify all audio cables are securely connected to correct inputs/outputs.
  • Increase the HI/LOW LEVEL knob on the subwoofer.
  • మీ తనిఖీ amplifier/receiver's subwoofer output settings and volume.
బలహీనమైన లేదా మఫ్ఫ్డ్ బాస్
  • తప్పు దశ సెట్టింగ్.
  • క్రాస్ఓవర్ ఫ్రీక్వెన్సీ చాలా తక్కువ.
  • సబ్ వూఫర్ ప్లేస్‌మెంట్.
  • Toggle the PHASE switch (0/180) to find the optimal setting.
  • Increase the CROSSOVER frequency gradually.
  • గదిలో వేర్వేరు సబ్ వూఫర్ ప్లేస్‌మెంట్‌లతో ప్రయోగం చేయండి.
వక్రీకరించిన ధ్వని
  • వాల్యూమ్ చాలా ఎక్కువ.
  • Overdriven input signal.
  • Reduce the HI/LOW LEVEL knob.
  • Lower the subwoofer output level on your ampలిఫైయర్/రిసీవర్.

If the problem persists after attempting these solutions, please contact REL Acoustics customer support.

స్పెసిఫికేషన్లు

ఫీచర్ వివరాలు
మోడల్ పేరు T/9x
స్పీకర్ రకం సబ్ వూఫర్
వూఫర్ వ్యాసం 10 Inches (Front-firing driver)
నిష్క్రియాత్మక రేడియేటర్ 10 అంగుళాలు (డౌన్-ఫైరింగ్)
Ampజీవిత రకం క్లాస్ A/B
స్పీకర్ గరిష్ట అవుట్‌పుట్ పవర్ 300 వాట్స్
ఫ్రీక్వెన్సీ రెస్పాన్స్ Down to 27Hz at -6dB
కనెక్టివిటీ టెక్నాలజీ RCA, Speakon (High-Level)
ఉత్పత్తి కొలతలు (D x W x H) 15.5"డి x 14.5"వా x 13.4"హ
వస్తువు బరువు 41.3 పౌండ్లు
రంగు Gray (High Gloss)
చేర్చబడిన భాగాలు RCA కేబుల్

వారంటీ మరియు మద్దతు

వారంటీ సమాచారం

The REL T/9x Subwoofer comes with a పరిమిత వారంటీ. For specific terms and conditions, please refer to the warranty card included with your product or visit the official REL Acoustics webసైట్.

కస్టమర్ మద్దతు

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact REL Acoustics customer support. You can find contact information on the official REL Acoustics webసైట్ లేదా మీ అధీకృత డీలర్ ద్వారా.

ఆన్‌లైన్ వనరులు: www.rel.net

సంబంధిత పత్రాలు - T/9x

ముందుగాview REL Tzero MkIII సబ్-బాస్ సిస్టమ్: ఆపరేటింగ్ సూచనలు మరియు సెటప్ గైడ్
REL Tzero MkIII సబ్-బాస్ సిస్టమ్ కోసం సమగ్ర ఆపరేటింగ్ సూచనలు మరియు సెటప్ గైడ్, కనెక్షన్లు, ప్లేస్‌మెంట్, క్రమాంకనం, సాంకేతిక వివరణలు మరియు భద్రతా సమాచారాన్ని కవర్ చేస్తుంది.
ముందుగాview REL HT-Air MkII వైర్‌లెస్ ఆపరేటింగ్ సూచనలు మరియు స్పెసిఫికేషన్‌లు
REL HT-Air MkII వైర్‌లెస్ ట్రాన్స్‌మిటర్ మరియు రిసీవర్ సిస్టమ్ కోసం సమగ్ర ఆపరేటింగ్ సూచనలు మరియు సాంకేతిక వివరణలు, మెరుగైన ఆడియో అనుభవాల కోసం సెటప్, జత చేయడం మరియు కనెక్టివిటీని వివరిస్తాయి.
ముందుగాview REL కమాండర్™ .1/LFE సబ్ వూఫర్ కేబుల్: క్విక్ స్టార్ట్ గైడ్ & ఫీచర్లు
కమాండింగ్ పనితీరు కోసం మీ REL కమాండర్™ .1/LFE సబ్ వూఫర్ కేబుల్‌ను ఎలా కనెక్ట్ చేయాలో తెలుసుకోండి. ఈ గైడ్ ఈ అధిక-నాణ్యత ఆడియో కేబుల్ కోసం సెటప్, కీలక లక్షణాలు మరియు ఉత్పత్తి స్పెసిఫికేషన్‌లను కవర్ చేస్తుంది.
ముందుగాview REL ప్రిడేటర్ HT/1510 సబ్-బాస్ సిస్టమ్ ఆపరేటింగ్ సూచనలు మరియు స్పెసిఫికేషన్లు
REL ప్రిడేటర్ HT/1510 సబ్-బాస్ సిస్టమ్ కోసం సమగ్ర ఆపరేటింగ్ సూచనలు, భద్రతా సమాచారం, కనెక్షన్ గైడ్‌లు మరియు సాంకేతిక వివరణలు. మీ అధిక-పనితీరు గల సబ్ వూఫర్‌ను ఎలా సెటప్ చేయాలో, కనెక్ట్ చేయాలో మరియు నిర్వహించాలో తెలుసుకోండి.
ముందుగాview REL కమాండర్™ .1/LFE సబ్ వూఫర్ కేబుల్: క్విక్ స్టార్ట్ గైడ్ & ఫీచర్లు
మెరుగైన హోమ్ థియేటర్ ఆడియో కోసం మీ REL కమాండర్™ .1/LFE సబ్ వూఫర్ కేబుల్‌ను కనెక్ట్ చేయండి. ఈ గైడ్ కనెక్షన్ దశలను వివరిస్తుంది మరియు రిచ్, డీప్ బాస్ కోసం ప్రీమియం ఫీచర్‌లను హైలైట్ చేస్తుంది.
ముందుగాview REL ఎయిర్‌షిప్ II వైర్‌లెస్ ఆపరేటింగ్ సూచనలు మరియు స్పెసిఫికేషన్‌లు
REL సబ్-బాస్ సిస్టమ్స్ కోసం అధిక-నాణ్యత, పారదర్శక వైర్‌లెస్ ట్రాన్స్‌మిషన్‌ను అందించడానికి రూపొందించబడిన REL ఎయిర్‌షిప్ II వైర్‌లెస్ జీరో-కంప్రెషన్ వైర్‌లెస్ ఆడియో సిస్టమ్ కోసం సమగ్ర ఆపరేటింగ్ సూచనలు, కనెక్షన్ గైడ్‌లు మరియు సాంకేతిక వివరణలు.