SCULPFUN S30 లేజర్ ఎన్‌గ్రేవర్ మరియు TS1 టచ్ స్క్రీన్ యూజర్ మాన్యువల్

1. పరిచయం

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver and TS1 Touch Screen. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper usage and to prevent damage or injury.

Safety Warning: This product is a Class IV laser device. Direct exposure to the laser beam can cause severe eye damage and skin burns. Always wear the provided laser safety goggles during operation. Ensure proper ventilation and never leave the machine unattended while operating.

Image 1.1: SCULPFUN S30 Laser Engraver with TS1 Touch Screen. The image displays the assembled laser engraver with a workpiece on its bed, alongside the separate TS1 touch screen controller.

2. ఉత్పత్తి భాగాలు

The following items are included in your package. Please verify all components upon receipt.

• 1 x S30 Laser Engraver Unit
• 1 x Laser Repair Kit
• 1 x 12V Automatic Air Pump
• 3 x A4 size 3mm Wood Boards
• 2 x Limit Switches
• 1 x 12V 5A పవర్ అడాప్టర్
• 1 x పవర్ కార్డ్
• 1 x USB కేబుల్
• 1 x Air Pipe
• 1 x ఇన్‌స్టాలేషన్ టూల్‌కిట్
• 1 x Laser Goggles
• 1 x A4 Metal Backing Plate
• Installation Package (Steps 1-6)
• 1 x User Manual (for S30)
• 1 x X-axis Assembly
• 2 x X Profiles
• 2 x Y Profiles
• 1 x Control Box Assembly
• 3 x మద్దతు అడుగులు
• 1 x TS1 Touch Screen
• 1 x Power Cord (for TS1)
• 1 x SD కార్డ్
• 1 x కార్డ్ రీడర్
• 1 x User Manual (for TS1)

3. స్పెసిఫికేషన్లు

SCULPFUN S30 లేజర్ చెక్కేవాడు

• Diode Laser Output Power: 5W (light energy)
• లేజర్ ఫోకస్: 0.06x0.06mm
• లేజర్ తరంగదైర్ఘ్యం: 455 ± 5nm
• దృష్టి కేంద్రీకరించే విధానం: Fixed focus column + sliding device
• లేజర్ రక్షణ: Detachable laser protection cover, adjustable/removable goggles
• పవర్ ఇన్‌పుట్: 100-240V AC, 50/60Hz
• అవుట్‌పుట్: 12V 5A
• చెక్కే ఖచ్చితత్వం: 0.005మి.మీ
• Standard Engraving Area: 410x400mm (expandable to 935x400mm or 935x905mm with extension kits)
• Machine Electric Power: సుమారు 60W
• Air Pump Type: Mainboard-controlled, 12V, 30L/min flow
• Air Hose Inner Diameter: 7.5మి.మీ
• మెయిన్‌బోర్డ్: 32-bit air-assisted, reserved for offline control (Bluetooth, SD card - upgrade package sold separately)
• ఆపరేటింగ్ సాఫ్ట్‌వేర్: LightBurn (with M8 air assist function), LaserGRBL, Benbox, GrblController, LiteFire
• మద్దతు ఉన్న OS: విండోస్, MAC
• మద్దతు ఇచ్చారు File ఫార్మాట్‌లు: NC, BMP, JPG, PNG, DXF, and other image formats
• డేటా ట్రాన్స్మిషన్: USB connection or Bluetooth wireless connection
• ఉత్పత్తి కొలతలు: 18.11 x 18.11 x 6.69 అంగుళాలు

Image 3.1: Illustration of the S30's 5W laser beam shaping technology, highlighting its high density and sharp focus for effective cutting and engraving.

SCULPFUN TS1 Touch Screen

• ఉత్పత్తి పదార్థం: ABS+PC
• స్క్రీన్ పరిమాణం: 3.5 అంగుళాలు
• స్క్రీన్ మెటీరియల్: కెపాసిటివ్ టచ్ స్క్రీన్
• స్క్రీన్ రిజల్యూషన్: 480x320
• ఉత్పత్తి పరిమాణం: 126x89x25mm
• కనెక్టివిటీ: Offline engraving via SD card, WiFi connectivity for mobile app control

Image 3.2: The SCULPFUN TS1 Touch Screen, showing its compact design and user interface for controlling the laser engraver.

4. సెటప్

4.1. Assembly of the S30 Laser Engraver

Refer to the included "Step 1-6 Installation package" and the S30 user manual for detailed assembly instructions. Ensure all screws are tightened and connections are secure. The assembly typically involves:

1. Assembling the X and Y profiles to form the frame.
2. Mounting the control box assembly and support feet.
3. Installing the X-axis assembly and laser module.
4. Connecting the limit switches and wiring.
5. Attaching the air pump and air pipe.

4.2. Connecting the TS1 Touch Screen

The TS1 touch screen connects to the S30 laser engraver via a USB cable. Plug one end of the USB cable into the S30 control box and the other end into the TS1. Connect the TS1 to its power adapter and plug it into a power outlet.

4.3. సాఫ్ట్‌వేర్ ఇన్‌స్టాలేషన్

For computer-controlled operation, install LightBurn or LaserGRBL software on your Windows or MAC system. Follow the software's installation guide. Ensure your computer's USB drivers are up-to-date for proper communication with the engraver.

5. ఆపరేటింగ్ సూచనలు

5.1 మెటీరియల్ తయారీ

Place the material to be engraved or cut on the metal backing plate within the engraving area. Ensure the material is flat and securely positioned to prevent movement during operation. For optimal results, use the provided A4 metal backing plate.

5.2. Focusing the Laser

The S30 features a fixed focus column and sliding device for focusing. Adjust the laser module's height until the focus column touches the material surface. This sets the optimal focal distance for the 0.06x0.06mm laser spot.

5.3. Automatic Air Assist Operation

The S30 is equipped with an automatic air assist system. This system can be controlled via the M8 command in LightBurn software. Air assist significantly improves cutting performance by clearing debris and reducing charring.

Image 5.1: The S30 laser engraver demonstrating automatic air assist. The image shows the laser module with air assist active during cutting and inactive during engraving, controlled by software settings.

Image 5.2: A visual comparison illustrating the benefits of automatic air assist over manual air pump control, showing cleaner cuts and edges with automatic control.

For engraving, air assist is typically turned OFF to achieve finer detail. For cutting, air assist is turned ON to increase cutting speed and produce cleaner edges.

5.4. Engraving and Cutting Materials

The S30 can engrave on a variety of materials including wood (walnut, cherry, MDF), bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, and dark stone. It can cut materials such as wood, MDF, acrylic board, cardboard, non-woven fabric, bamboo sheets, leather, and some plastic boards.

5.5. Using the TS1 Touch Screen for Offline Control and WiFi

The TS1 touch screen enables offline operation and WiFi connectivity.

• ఆఫ్‌లైన్ చెక్కడం: Save your engraving files to the provided SD card. Insert the SD card into the TS1. You can then select and initiate engraving jobs directly from the touch screen without a computer connection.
• వైఫై కనెక్టివిటీ: The TS1 provides WiFi capabilities to the S30. When connected to WiFi, you can use the SCULPFUN mobile application to control the engraver and create designs in real-time from your smartphone or tablet.

Image 5.3: The TS1 touch screen connected to the S30, demonstrating its WiFi functionality and compatibility with a mobile application for wireless control.

6. నిర్వహణ

6.1. Laser Lens Cleaning

Regularly inspect the laser lens for dust or debris. Use a soft, lint-free cloth and a small amount of lens cleaning solution (e.g., isopropyl alcohol) to gently clean the lens. Avoid abrasive materials or excessive force, which can scratch the lens.

6.2. General Machine Cleaning

Keep the engraving area and linear rails clean from dust and material residue. Use a brush or compressed air to remove debris. Periodically check and clean the air pump filter if applicable.

7. ట్రబుల్షూటింగ్

• మెషిన్ ఆన్ చేయడం లేదు: Check all power connections, ensure the power adapter is securely plugged into both the machine and a working outlet.
• లేజర్ కాల్చడం లేదు: Verify the laser module is correctly installed and connected. Check software settings to ensure the laser power is set above zero. Ensure safety interlocks (if any) are engaged.
• పేలవమైన చెక్కడం/కటింగ్ నాణ్యత:
• Check laser focus.
• Adjust engraving/cutting speed and power settings in the software.
• Ensure the material is flat and stable.
• లేజర్ లెన్స్ శుభ్రం చేయండి.
• For cutting, ensure air assist is enabled and functioning.
• Machine Not Connecting to Computer: Ensure the USB cable is properly connected. Reinstall or update USB drivers. Try a different USB port or cable.
• TS1 Not Responding: Ensure the TS1 is powered on and connected to the S30. Restart both devices.

8. భద్రతా మార్గదర్శకాలు

• కంటి రక్షణ: Always wear the provided laser safety goggles when the laser engraver is operating. Never look directly at the laser beam.
• వెంటిలేషన్: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving/cutting. Consider using an exhaust system.
• అగ్ని భద్రత: Keep a fire extinguisher nearby. Do not leave the machine unattended during operation, especially when cutting flammable materials.
• మెటీరియల్ భద్రత: Only engrave/cut materials specified as safe. Avoid materials that produce toxic fumes or are highly reflective.
• పిల్లలు మరియు పెంపుడు జంతువులు: పిల్లలు మరియు పెంపుడు జంతువులను ఆపరేటింగ్ ప్రాంతం నుండి దూరంగా ఉంచండి.
• అత్యసవర నిలుపుదల: Familiarize yourself with the location of the power switch for quick shutdown in an emergency.
• విద్యుత్ భద్రత: Ensure the power supply is stable and matches the machine's requirements. Do not operate with damaged cables or adapters.

9. వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the specific warranty card included with your product or contact SCULPFUN customer service through their official webఉత్పత్తిని కొనుగోలు చేసిన సైట్ లేదా రిటైలర్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.