1. ఉత్పత్తి ముగిసిందిview

The YESWELDER ARC-125D PRO is a compact and portable mini inverter welding machine designed for both MMA (Manual Metal Arc, also known as Stick welding) and Lift TIG (Tungsten Inert Gas) welding processes. It features an intelligent LED display for clear visibility of welding parameters and incorporates advanced technologies such as Hot Start, Arc Force, Anti-Stick, and VRD (Voltage Reduction Device) for enhanced performance and safety.

Image 1.1: The YESWELDER ARC-125D PRO Mini Inverter Welder shown with its included ground clamp and electrode holder.

ముఖ్య లక్షణాలు:

• 2-in-1 Welding Modes: Supports both MMA (Stick) and Lift TIG welding for versatile applications.
• పెద్ద LED డిస్ప్లే: Provides clear and easy-to-read information on current, electrode size, function mode, and welding mode.
• Advanced Welding Functions: Equipped with Hot Start, Arc Force, Anti-Stick, and VRD for improved arc ignition, stability, and safety.
• పోర్టబుల్ డిజైన్: Compact dimensions (23.6 x 9.4 x 13 cm) and lightweight (approximately 2 kg) for easy transport and storage.
• భద్రతా రక్షణలు: Includes automatic compensation for voltage fluctuations, overcurrent protection, overload protection, and temperature control.

2. భద్రతా సమాచారం

Welding operations involve significant risks. Always prioritize safety to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

సాధారణ భద్రతా జాగ్రత్తలు:

• వ్యక్తిగత రక్షణ పరికరాలు (PPE): Always wear appropriate PPE, including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
• వెంటిలేషన్: Ensure adequate ventilation to remove welding fumes and gases, which can be hazardous to health.
• అగ్ని నివారణ: Keep a fire extinguisher nearby. Remove all flammable materials from the welding area. Be aware of sparks and hot slag.
• విద్యుత్ భద్రత: Ensure the welding machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
• Eye and Skin Protection: Welding arc rays can cause severe burns to eyes and skin. Never look at the welding arc without proper eye protection.
• పని ప్రాంతం: Keep the work area clean, dry, and free of clutter. Ensure stable footing.
• పిల్లలు మరియు ప్రేక్షకులు: Keep children and unauthorized personnel away from the welding area.

VRD (వాల్యూంtage Reduction Device) function is designed to reduce the open-circuit voltage to a safe level when the machine is not actively welding, minimizing the risk of electric shock. Always ensure this feature is active unless specific welding conditions require its deactivation (refer to operating instructions).

3. భాగాలు మరియు నియంత్రణలు

Familiarize yourself with the components and control panel of your YESWELDER ARC-125D PRO welding machine.

చేర్చబడిన భాగాలు:

• YESWELDER ARC-125D PRO Mini Inverter Welder
• గ్రౌండ్ Clamp కేబుల్ తో
• Electrode Holder with Cable
• వినియోగదారు మాన్యువల్

నియంత్రణ ప్యానెల్ పరిచయం:

చిత్రం 3.1: ముందు మరియు వెనుక view of the ARC-125D PRO, highlighting control panel elements and connections.

1. Parameter Button (PARAM): Used to cycle through adjustable parameters such as Hot Start and Arc Force.
2. Welding Mode Button (MODE): Toggles between MMA (Stick) and Lift TIG welding modes.
3. VRD Button (VRD ON/OFF): Activates or deactivates the Voltage Reduction Device.
4. డిజిటల్ ప్రదర్శన: Shows current settings, selected mode, and other operational information.
5. విలువ నాబ్: Adjusts the welding current or other selected parameters.
6. Positive Output Terminal (+): Connects to the electrode holder for MMA or TIG torch for Lift TIG.
7. Negative Output Terminal (-): Connects to the ground clamp.
8. ఇన్‌పుట్ పవర్ కేబుల్: Connects the machine to the 230V AC power supply.
9. పవర్ స్విచ్: Turns the welding machine ON or OFF.
10. ఫ్యాన్: Provides cooling for the internal components during operation.

4. సెటప్

Proper setup is crucial for safe and effective welding. Follow these steps before beginning any welding task.

4.1 పవర్ కనెక్షన్:

• వెల్డింగ్ మెషిన్ యొక్క పవర్ స్విచ్ ఆఫ్ స్థానంలో ఉందని నిర్ధారించుకోండి.
• Connect the input power cable to a grounded 230V AC power outlet. Verify that the power supply meets the machine's requirements.

4.2 Connecting Welding Cables:

1. గ్రౌండ్ Clamp: గ్రౌండ్ clని కనెక్ట్ చేయండిamp cable to the Negative Output Terminal (-) on the front panel. Securely attach the ground clamp వెల్డింగ్ టేబుల్ యొక్క వర్క్‌పీస్ లేదా శుభ్రమైన, బేర్ మెటల్ భాగానికి, మంచి విద్యుత్ సంబంధాన్ని నిర్ధారిస్తుంది.
2. Electrode Holder (for MMA): Connect the electrode holder cable to the Positive Output Terminal (+) on the front panel.
3. TIG Torch (for Lift TIG): For Lift TIG welding, connect your TIG torch (not included) to the Positive Output Terminal (+). Ensure the TIG torch has a gas valve for manual gas control.

Always ensure all connections are tight and secure before powering on the machine.

5. ఆపరేటింగ్ సూచనలు

This section details the operation of the YESWELDER ARC-125D PRO for both MMA and Lift TIG welding modes.

5.1 MMA (Stick) Welding:

1. పవర్ ఆన్: Turn on the welding machine using the Power Switch. The LED display will illuminate.
2. Select MMA Mode: Press the MODE button until "Stick" or "MMA" is indicated on the digital display.
3. Insert Electrode: Securely insert the appropriate electrode (e.g., E6011, E6013, E6010, E7018 up to 3.18mm) into the electrode holder.
4. కరెంట్‌ని సర్దుబాటు చేయండి: Use the Value Knob to set the desired welding current (Amperage) based on the electrode type and material thickness.
5. పారామితులను సర్దుబాటు చేయండి (ఐచ్ఛికం): Press the PARAM button to cycle through Hot Start and Arc Force settings. Use the Value Knob to adjust these values as needed for optimal arc ignition and stability.
6. VRD Function: Ensure the VRD is ON for maximum safety, especially in damp environments or when working at height.
7. వెల్డింగ్ ప్రారంభించండి: Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly to establish the arc. Maintain a consistent arc length and travel speed.

చిత్రం 5.1: ఉదాample of Stick welding in progress.

5.2 లిఫ్ట్ TIG వెల్డింగ్:

For Lift TIG welding, a TIG torch with a gas valve and a separate gas cylinder (Argon) are required (not included).

1. పవర్ ఆన్: వెల్డింగ్ యంత్రాన్ని ఆన్ చేయండి.
2. Select Lift TIG Mode: Press the MODE button until "Lift TIG" is indicated on the digital display.
3. Connect TIG Torch: Ensure your TIG torch is connected to the Positive Output Terminal (+) and the gas hose is connected to your Argon gas cylinder.
4. Prepare Tungsten Electrode: Install a sharpened tungsten electrode into the TIG torch.
5. కరెంట్‌ని సర్దుబాటు చేయండి: Use the Value Knob to set the desired welding current.
6. Open Gas Valve: Open the gas valve on the TIG torch to establish gas flow.
7. Initiate Arc (Lift Arc): Gently touch the tungsten electrode to the workpiece. A small current will flow. Slowly lift the torch to establish the arc. The machine will automatically increase the current to the set value.
8. Perform Welding: Maintain a consistent arc length and feed filler rod manually if required.
9. టెర్మినేట్ ఆర్క్: To stop welding, simply lift the torch away from the workpiece. Close the gas valve on the TIG torch after welding.

చిత్రం 5.2: ఉదాample of Lift TIG welding in progress.

6. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ వెల్డింగ్ యంత్రం యొక్క దీర్ఘాయువు మరియు సురక్షితమైన ఆపరేషన్‌ను నిర్ధారిస్తుంది.

సాధారణ నిర్వహణ చిట్కాలు:

• శుభ్రపరచడం: Periodically clean the machine's exterior with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• కేబుల్ తనిఖీ: Regularly inspect all welding cables, connections, and the power cord for cuts, fraying, or damage. Replace damaged components immediately.
• టెర్మినల్ కనెక్షన్లు: Ensure all output terminals are clean and connections are tight. Loose connections can cause overheating and poor performance.
• నిల్వ: Store the welding machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.
• ఫ్యాన్ ఆపరేషన్: Ensure the cooling fan is not obstructed and operates freely during use.

7. ట్రబుల్షూటింగ్

This section provides solutions to common issues you might encounter during operation.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact YESWELDER customer service.

8. స్పెసిఫికేషన్లు

Detailed technical specifications for the YESWELDER ARC-125D PRO Mini Inverter Welder.

Image 8.1: Technical specifications for the ARC-125D PRO.

Image 8.2: The ARC-125D PRO's compact size and light weight (2kg).

9. వారంటీ మరియు కస్టమర్ మద్దతు

YESWELDER is committed to providing quality products and customer satisfaction.

For any issues, questions, or concerns regarding your YESWELDER ARC-125D PRO welding machine, please refer to the contact information provided with your product packaging or visit the official YESWELDER website for support. When contacting support, please have your model number (ARC-125D PRO) and purchase details readily available.