RunCam Thumb 2 FPV మినీ యాక్షన్ కెమెరా యూజర్ మాన్యువల్

1. పరిచయం

This manual provides detailed instructions for the proper use, setup, and maintenance of your RunCam Thumb 2 FPV Mini Action Camera. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

2. ఉత్పత్తి ముగిసిందిview

The RunCam Thumb 2 is an ultra-lightweight FPV mini action camera designed for high-quality video recording in various RC applications, including drones, cinewhoops, airplanes, and RC cars. It features 4K60FPS recording, Gyroflow stabilization support, and remote control capabilities.

చిత్రం 2.1: ముందు మరియు వెనుక view of the RunCam Thumb 2 camera with key components labeled. This includes the lens cover, microphone, button (power/shutter), micro SD card slot, ventilation holes, indicator light (red/green), and the 1.25mm 3P (5V/GND/PWM) connector.

ముఖ్య భాగాలు:

• లెన్స్ కవర్: Protects the camera lens.
• MIC: ఆడియో రికార్డింగ్ కోసం ఇంటిగ్రేటెడ్ మైక్రోఫోన్.
• బటన్: Used for power on/off and initiating recording.
• మైక్రో SD కార్డ్ స్లాట్: For inserting a Micro SD card (up to 128GB recommended) for video storage.
• వెంటిలేషన్ రంధ్రాలు: వేడి వెదజల్లడానికి రూపొందించబడింది.
• సూచిక కాంతి: Displays camera status (e.g., recording, standby, scanning mode).
• 1.25mm 3P Connector (5V/GND/PWM): For external power supply and remote control signal input.

3. పెట్టెలో ఏముంది

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

చిత్రం 3.1: Included accessories with the RunCam Thumb 2 camera. This image displays the camera, a 3D printed camera mount, a Type-C control cable, a JST 1.25 * 3Pin cable, and a set of screws.

• 1x RunCam Thumb 2 Camera
• 1x 3D Printed Camera Mount
• 1x స్క్రూల సెట్
• 1x JST Cable
• 1x Set of ND Filter (Note: May vary by package variant. Refer to your purchase details.)

4. సెటప్

4.1 విద్యుత్ సరఫరా

The RunCam Thumb 2 does not have a built-in battery and requires an external 5V DC power supply. Ensure the power source provides a stable 5V to prevent damage.

చిత్రం 4.1: Illustrations of power supply methods for the Thumb 2. The camera can be powered via a Type-C cable from a power bank or directly from a BEC (Battery Eliminator Circuit) providing 5V.

• From Flight Controller/BEC: Connect the included JST cable to your flight controller or a BEC providing a stable 5V output. Ensure correct polarity (5V, GND).
• From Power Bank (for standalone use): Use a Type-C cable to connect the camera to a 5V power bank.

4.2 మైక్రో SD కార్డ్ ఇన్‌స్టాలేషన్

Insert a Micro SD card (Class 10 or higher, up to 128GB recommended) into the Micro SD card slot with the contacts facing the camera body. Gently push until it clicks into place. To remove, push the card in again until it springs out.

4.3 మౌంటు

Use the provided 3D printed camera mount to securely attach the RunCam Thumb 2 to your FPV drone, RC car, or other desired platform. Ensure the camera is firmly mounted to minimize vibrations and prevent loss during operation.

5. ఆపరేటింగ్ సూచనలు

5.1 ప్రాథమిక ఆపరేషన్

• పవర్ ఆన్: Connect the camera to a 5V power source. The indicator light will illuminate.
• రికార్డింగ్‌ను ప్రారంభించు/ఆపు: Press the button once to start recording. The indicator light will change to indicate recording status. Press again to stop recording.

5.2 Remote Control Recording (via UART)

The RunCam Thumb 2 supports remote control recording via UART, typically connected to a flight controller. This allows you to start and stop recording using your remote transmitter.

చిత్రం 5.1: Wiring diagram illustrating how to connect the RunCam Thumb 2 for remote control via UART. This example shows soldering the Type-C control cable wires to a Speedy Bee F7 V3 flight controller: Power wire to 5V pad, GND wire to GND pad, Tx wire to R3 pad, and Rx wire to T3 pad.

వైరింగ్ ఎక్స్ample (Speedy Bee F7):

• Solder the power wire (red) of the Type-C control cable to a 5V pad on your flight controller.
• Solder the GND wire (black) to a GND pad on your flight controller.
• Solder the Tx wire (green) to an Rx pad (e.g., R3) on your flight controller.
• Solder the Rx wire (white) to a Tx pad (e.g., T3) on your flight controller.

Note: Being too close to the GPS module may affect signal reception. Position the camera appropriately.

5.3 Camera Settings via RunCam App (QR Code)

Adjust camera settings such as resolution, saturation, exposure, and recording mode using the RunCam App on your smartphone. The app generates a QR code that the camera scans to apply settings.

చిత్రం 5.2: Screenshot of the RunCam App showing various camera settings like recording mode, video quality, resolution, and stabilization. The app can generate a QR code to apply these settings to the camera.

1. Download and open the RunCam App. Select 'Thumb 2'.
2. Configure your desired settings (e.g., resolution, image rotation, recording mode).
3. Generate the QR code within the app.
4. Power on the camera. Double-press the button to switch to scanning mode (indicator light turns solid green).
5. Present the generated QR code to the camera lens at an optimum distance of approximately 25mm. The indicator light will turn solid red upon successful scanning and application of settings.

5.4 Gyroflow Stabilization

The RunCam Thumb 2 features a built-in gyroscope that records Gyro data fileలు. ఇవి files can be used with Gyroflow software on a computer to achieve smooth and stabilized video footagఇ పోస్ట్ ప్రొడక్షన్ లో ఉంది.

6. నిర్వహణ

6.1 లెన్స్ రక్షణ

The camera is equipped with a replaceable protective cover and uses Corning Gorilla Glass for scratch resistance. Regularly inspect the lens cover for damage. Replace it if scratches or cracks impair image quality.

చిత్రం 6.1: Visual representation of the lens protection feature, highlighting the scratch-resistant Corning Gorilla Glass and the replaceable protective cover.

6.2 సాధారణ సంరక్షణ

• Keep the camera clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the camera to extreme temperatures or direct sunlight for prolonged periods.
• ఆపరేషన్‌కు ముందు అన్ని కనెక్షన్‌లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.

7. ట్రబుల్షూటింగ్

7.1 వేడెక్కడం

The RunCam Thumb 2 is a compact device. In certain conditions, especially during continuous 4K60FPS recording or in high ambient temperatures, the camera may experience overheating. If the camera shuts down due to overheating, allow it to cool down before resuming operation. Consider reducing the resolution for extended recording sessions or ensuring adequate airflow around the camera.

7.2 రికార్డింగ్ సమస్యలు

• కెమెరా రికార్డ్ కావడం లేదు: Check if a Micro SD card is inserted correctly and has sufficient free space. Ensure the card is formatted correctly (FAT32 or exFAT).
• భ్రష్టుపట్టింది files: This can occur if power is abruptly cut during recording. Always stop recording before disconnecting power.

7.3 విద్యుత్ సమస్యలు

• కెమెరా పవర్ ఆన్ చేయడం లేదు: Verify the 5V power supply connection and ensure correct polarity. Check the power source for proper output.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or service inquiries, please refer to the official RunCam webసైట్‌లో లేదా మీ అధీకృత డీలర్‌ను సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.