1. పరిచయం
The ADJ Accu Stand VFB1 is a robust and versatile floor base designed for vertically mounting compatible lighting fixtures. This manual provides essential information for the safe and effective setup, operation, and maintenance of your VFB1 floor base.
ముఖ్య లక్షణాలు:
- Designed to vertically mount up to four (4) ElectraPix Bar 8 fixtures or two (2) ElectraPix Bar 16 fixtures.
- Constructed from durable steel for stability and longevity.
- Compact dimensions for efficient use of space.
2. ప్యాకేజీ విషయాలు
Please inspect the package contents upon receipt to ensure all components are present and undamaged.
- 1 x ADJ Accu Stand VFB1 Floor Base
- Mounting hardware (screws, washers, nuts) for attaching brackets and fixtures (may be pre-attached or included separately).
3. సెటప్ మరియు అసెంబ్లీ
Follow these steps to properly assemble and set up your Accu Stand VFB1 Floor Base.
3.1 అన్ప్యాకింగ్
- Carefully remove the floor base and all components from the packaging.
- భవిష్యత్తులో రవాణా లేదా నిల్వ కోసం ప్యాకేజింగ్ను ఉంచండి.
3.2 బేస్ అసెంబ్లీ
The VFB1 floor base typically comes with its mounting brackets pre-attached. If not, secure the two vertical mounting brackets to the base plate using the provided screws and nuts. Ensure they are firmly tightened for stability.
చిత్రం 1: పైగాview of the ADJ Accu Stand VFB1 Floor Base with its two vertical mounting brackets.
చిత్రం 2: దిగువ view of the VFB1 base, illustrating the placement of rubber feet and screw points for secure assembly.
3.3 Mounting Fixtures
- Position the ElectraPix Bar fixture(s) onto the vertical mounting brackets. The brackets feature keyhole slots designed to align with the fixture's mounting points.
- Secure the fixture(s) to the brackets using the appropriate screws or quick-release mechanisms provided with your ElectraPix Bar fixtures. Ensure all connections are tight and secure to prevent accidental dislodgement.
- Verify that the fixture is stable and vertically aligned before operation.
Figure 3: Close-up of a fixture's mounting point attached to the VFB1 bracket, demonstrating the secure connection.
Figure 4: An ADJ ElectraPix Bar 16 fixture shown mounted vertically on the VFB1 Floor Base.
Figure 5: The VFB1 Floor Base supporting an illuminated ElectraPix Bar 16 fixture, demonstrating its intended use.
4. ఆపరేషన్ మార్గదర్శకాలు
The Accu Stand VFB1 is a passive accessory. Proper operation primarily involves ensuring stable placement and adherence to safety guidelines.
- స్థిరమైన స్థానం: Always place the floor base on a flat, level, and stable surface to prevent tipping.
- బరువు పంపిణీ: Ensure that the weight of the mounted fixtures is evenly distributed and does not exceed the base's stability limits.
- క్లియరెన్స్: Maintain adequate clearance around the base and mounted fixtures to prevent obstruction or accidental impact.
- సురక్షిత కనెక్షన్లు: Regularly check that all fixtures are securely attached to the mounting brackets.
5. నిర్వహణ
Regular maintenance helps ensure the longevity and safe operation of your VFB1 floor base.
- శుభ్రపరచడం: Wipe the base with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- తనిఖీ: Periodically inspect the base for any signs of damage, such as bends, cracks, or loose fasteners. Ensure the rubber feet are intact.
- ఫాస్టెనర్లు: Check and tighten any loose screws or bolts on the mounting brackets and base plate.
6. ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with the Accu Stand VFB1 Floor Base.
- సమస్య: The base feels unstable or wobbly.
పరిష్కారం: Ensure the base is placed on a completely flat and level surface. Check that all mounting hardware for the brackets and fixtures are securely tightened. Verify that the rubber feet are present and making full contact with the floor. - సమస్య: Fixtures are difficult to mount or do not fit.
పరిష్కారం: Confirm that the fixtures you are attempting to mount are compatible with the VFB1 base (e.g., ElectraPix Bar 8 or 16). Ensure you are aligning the fixture's mounting points correctly with the keyhole slots on the brackets. Do not force fixtures into place.
7. స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ సంఖ్య | ACC111 |
| కొలతలు (L x W x H) | 19.7" x 19.4" x 1.4" (500మిమీ x 494మిమీ x 36మిమీ) |
| మెటీరియల్ | ఉక్కు |
| యూనిట్ బరువు | 22 పౌండ్లు (10 కిలోలు) |
| అనుకూలత | ElectraPix Bar 8 (up to 4), ElectraPix Bar 16 (up to 2) |
8. వారంటీ మరియు మద్దతు
For warranty information or technical support regarding your ADJ Accu Stand VFB1 Floor Base, please refer to the warranty card included with your purchase or visit the official ADJ Products website. You may also contact ADJ customer service directly for assistance.
