Xigmatek Elysium II Full Tower PC Case User Manual

1. పరిచయం

Thank you for choosing the Xigmatek Elysium II Full Tower PC Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and optimal performance.

Figure 1.1: Xigmatek Elysium II Full Tower PC Case with illuminated ARGB fans.

ముఖ్య లక్షణాలు:

• Four-sided tempered glass panels for a premium aesthetic and component visibility.
• Supports motherboards up to SSI EEB/CEB and E-ATX for high-end workstation and gaming builds.
• Extensive cooling support with pre-installed 16 x 140mm ARGB square ring fans.
• Accommodates large liquid cooling radiators: Top (up to 420mm), Front (up to 480mm), Rear (up to 280mm).
• CPU cooler height support up to 220mm.
• Graphics card length support up to 460mm.
• Convenient top I/O panel with USB Type-C x 1, USB 3.0 x 2, USB 2.0 x 1, and HD Audio Jack.

2. స్పెసిఫికేషన్లు

3. సెటప్ మరియు ఇన్‌స్టాలేషన్

Before starting, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation steps.

3.1 ప్యాకేజీ విషయాలు

• Xigmatek Elysium II Full Tower PC Case
• 16 x 140mm ARGB Square Ring Fans (pre-installed)
• 2 x Galaxy II Fan Control Boxes
• Remote Control Sets
• యాక్సెసరీ బాక్స్ (స్క్రూలు, కేబుల్ టైలు, స్టాండ్‌ఆఫ్‌లు మొదలైనవి)
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

3.2 కాంపోనెంట్ ఐడెంటిఫికేషన్

Figure 3.1: Internal layout of the Elysium II case, highlighting fan mounts and component areas.

Figure 3.2: Rear internal view, showing cable management space and drive bay locations.

3.3 సంస్థాపనా దశలు

1. కేసును సిద్ధం చేయండి: Carefully remove the tempered glass panels. Lay the case on its side on a stable, flat surface.
2. మదర్‌బోర్డ్‌ను ఇన్‌స్టాల్ చేయండి: Install the necessary standoffs for your motherboard form factor. Gently place your motherboard onto the standoffs and secure it with screws.
3. పవర్ సప్లై యూనిట్ (PSU) ఇన్‌స్టాల్ చేయండి: Mount your PSU into its designated compartment (top mount). Secure it with screws from the rear of the case. Route necessary cables through the cable management cutouts.
4. నిల్వ పరికరాలను ఇన్‌స్టాల్ చేయండి: Locate the drive bays for 2.5" SSDs and 3.5" HDDs. Secure your storage devices using the provided screws or tool-less mechanisms.
5. Install Graphics Card (GPU) and Expansion Cards: Remove the necessary PCIe slot covers. Insert your graphics card and any other expansion cards into their respective slots on the motherboard and secure them.
6. కేబుల్స్ కనెక్ట్ చేయండి: Connect all power cables from the PSU to your motherboard, GPU, and storage devices. Connect the front panel I/O cables (USB, audio, power/reset buttons, LEDs) to the appropriate headers on your motherboard. Ensure all pre-installed fan cables and ARGB cables are connected to the fan control boxes and then to the motherboard or PSU as required.
7. కేబుల్ నిర్వహణ: Utilize the cable routing channels and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
8. Reinstall Panels: Once all components are installed and cables are managed, carefully reattach the tempered glass panels.

4. ఆపరేటింగ్ సూచనలు

4.1 పవర్ ఆన్

After completing the installation, connect your monitor, keyboard, mouse, and power cable to the PSU. Press the power button located on the top I/O panel of the case to start your system.

4.2 ARGB ఫ్యాన్ కంట్రోల్

The Elysium II comes with pre-installed ARGB fans and two Galaxy II fan control boxes. You can control the lighting effects and fan speeds using the included remote control. Refer to the Galaxy II fan control box manual for detailed instructions on changing modes, colors, and brightness. The reset button on the top I/O panel may also cycle through ARGB modes if connected to the controller's reset header.

4.3 ఫ్రంట్ I/O పోర్ట్‌లు

The top I/O panel provides convenient access to:

• USB Type-C port for modern devices.
• USB 3.0 ports for high-speed data transfer.
• USB 2.0 port for general peripherals.
• HD Audio Jack for headphones and microphones.
• Reset button for system restart.

5. నిర్వహణ

Regular maintenance helps ensure the longevity and optimal performance of your PC components.

• డస్ట్ ఫిల్టర్లు: The Elysium II case is equipped with removable dust filters. Periodically remove and clean these filters (e.g., with compressed air or by washing with water and drying thoroughly) to prevent dust buildup inside the case, which can impede airflow and cooling.
• బాహ్య క్లీనింగ్: ఒక మృదువైన ఉపయోగించండి, డిamp cloth to wipe down the exterior surfaces, including the tempered glass panels. Avoid abrasive cleaners or solvents that could damage the finish.
• ఇంటీరియర్ క్లీనింగ్: With the system powered off and unplugged, use compressed air to remove dust from internal components, especially fan blades and heatsinks.

6. ట్రబుల్షూటింగ్

If you encounter issues with your PC case, consider the following common problems and solutions:

• శక్తి లేదు:
  • Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
  • Verify that the 24-pin ATX power cable and 8-pin CPU power cable are securely connected to the motherboard.
  • Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• ఫ్యాన్లు తిరగడం లేదు / RGB వెలిగించడం లేదు:
  • Confirm that all fans are properly connected to the fan control boxes.
  • Ensure the fan control boxes are receiving power from the PSU (usually via SATA power connector).
  • Check that the ARGB cables from the control boxes are connected to the motherboard's ARGB header (if applicable) or that the remote control is functioning and has fresh batteries.
• Front USB Ports Not Working:
  • Verify that the USB 3.0, USB 2.0, and USB Type-C cables from the front panel are securely connected to the corresponding headers on your motherboard.
• No Audio from Front Jack:
  • ముందు ప్యానెల్ నుండి HD ఆడియో కేబుల్ మీ మదర్‌బోర్డ్‌లోని ఆడియో హెడర్‌కు సరిగ్గా కనెక్ట్ చేయబడిందని నిర్ధారించుకోండి.

For persistent issues, consult the Xigmatek support webసైట్ లేదా కస్టమర్ సేవను సంప్రదించండి.

7. వారంటీ మరియు మద్దతు

Xigmatek products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Xigmatek webవారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.