Manfrotto 055 3-Section Carbon Fiber Tripod with XPRO Magnesium Ball Head and MSQ6PL Quick Release Plate

పరిచయం

This manual provides instructions for the safe and effective use of your Manfrotto 055 3-Section Carbon Fiber Tripod, equipped with the XPRO Magnesium Ball Head and MSQ6PL Quick Release Plate. The 055 carbon fiber tripod offers high rigidity and a lightweight design, featuring a 90° column for versatile shooting. Its 100% carbon fiber tubes and Quick Power Lock leg-locks ensure stability. The XPRO Ball Head is designed for portability, supporting payloads up to 10kg with its triple locking system, three wedges, and dual leveling bubbles.

భద్రతా సమాచారం

• బరువు పరిమితి: Do not exceed the maximum payload capacity of 44 pounds (20 kg) for the tripod and 10 kg for the ball head. Overloading can cause instability and damage.
• స్థిరత్వం: Always ensure all leg sections and leg angle selectors are fully locked before mounting equipment. Use the tripod on a stable, level surface.
• కదిలే భాగాలు: Be cautious when extending or collapsing legs and adjusting the center column to avoid pinching fingers.
• పర్యావరణ పరిస్థితులు: Avoid using the tripod in extreme weather conditions (e.g., strong winds, heavy rain) without proper precautions. Carbon fiber is durable but can be damaged by severe impacts.
• నిర్వహణ: Regularly inspect all components for wear, damage, or loose parts. Do not use if any part is compromised.

ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

• Manfrotto 055 3-Section Carbon Fiber Tripod
• Manfrotto XPRO Magnesium Ball Head
• Manfrotto MSQ6PL Quick Release Plate
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

సెటప్

Image: Manfrotto 055 Carbon Fiber Tripod with XPRO Ball Head and MSQ6PL Quick Release Plate assembled.

1. అన్‌ప్యాకింగ్: ప్యాకేజింగ్ నుండి అన్ని భాగాలను జాగ్రత్తగా తొలగించండి. భవిష్యత్తులో నిల్వ లేదా రవాణా కోసం ప్యాకేజింగ్‌ను ఉంచండి.
2. బాల్ హెడ్‌ను అటాచ్ చేయడం:
   • Locate the mounting screw on the top plate of the tripod's center column.
   • Align the base of the XPRO Ball Head with the mounting screw.
   • Rotate the ball head clockwise until it is securely tightened onto the tripod. Ensure it is firm but do not overtighten.
3. Mounting the Quick Release Plate to Camera:
   • Locate the 1/4" or 3/8" screw on the MSQ6PL Quick Release Plate.
   • Align the screw with the tripod mount thread on the bottom of your camera.
   • Tighten the screw securely using a coin or the integrated D-ring (if available) until the plate is firmly attached to the camera body.
4. Attaching Camera to Tripod:
   • త్వరిత విడుదల cl ని నిర్ధారించుకోండిamp on the XPRO Ball Head is open.
   • Slide the camera with the attached MSQ6PL plate into the quick release clamp.
   • శీఘ్ర విడుదల clను మూసివేయండిamp firmly until it locks into place. Verify that the camera is securely mounted by gently attempting to lift it.
5. Adjusting Leg Angles and Height:
   • కాలు కోణాలు: Each leg has an angle selector. Press the selector to adjust the leg to one of the available angles (23°, 50°, 70°). Ensure all three legs are set to the same angle for maximum stability.
   • కాలు ఎత్తు: The Quick Power Lock (QPL) levers allow for rapid and secure leg extension. Flip open the QPL levers, extend the leg sections to the desired height, and then firmly close the levers to lock them in place.
6. Using the 90° Column:
   • To convert the center column to horizontal orientation, fully extend the center column.
   • Press the column release button located at the base of the center column.
   • Pull the column upwards until it clears the tripod chassis.
   • Rotate the column 90° to the desired horizontal position.
   • Lower the column back into the chassis until it locks securely.

ఆపరేటింగ్

1. Adjusting Ball Head Tension:
   • The XPRO Ball Head features a main locking knob to control the ball's movement. Turn it counter-clockwise to loosen and allow movement, and clockwise to tighten and lock the ball.
   • A separate friction control knob allows you to set the desired resistance for the ball movement, preventing sudden drops of heavy equipment when the main knob is loosened. Adjust this to match your camera's weight.
2. Panning and Tilting:
   • The XPRO Ball Head allows for 360° panning. Loosen the dedicated panning lock knob (usually located at the base of the ball head) to rotate the camera horizontally. Tighten to lock.
   • Tilting is controlled by the main ball locking knob. Loosen it to adjust the camera's vertical angle and then tighten to secure.
3. Using the Quick Release Plate:
   • To quickly remove your camera, open the quick release clamp lever on the ball head and slide the camera (with plate) out.
   • To re-attach, slide the camera with the MSQ6PL plate back into the clamp and close the lever until it locks.
4. మడత మరియు రవాణా:
   • Ensure the center column is fully retracted and locked in the vertical position.
   • Collapse all leg sections by opening the QPL levers, retracting the sections, and closing the levers.
   • Fold the legs upwards towards the center column for compact storage.

నిర్వహణ

• శుభ్రపరచడం:
  • Wipe carbon fiber legs and metal parts with a soft, damp వస్త్రం. రాపిడి క్లీనర్లు లేదా ద్రావకాలను నివారించండి.
  • For sand or dirt, extend all leg sections and clean thoroughly to prevent grit from damaging the locking mechanisms.
  • Clean the quick release plate and clamp మృదువైన ఆపరేషన్ను నిర్ధారించడానికి క్రమం తప్పకుండా.
• నిల్వ: Store the tripod in a dry, cool place, away from direct sunlight and extreme temperatures. Use a tripod bag for protection during transport and storage.
• భాగాలను తనిఖీ చేస్తోంది: Periodically check all screws, levers, and joints for tightness. Ensure leg locks engage securely and the ball head operates smoothly. Do not attempt to lubricate internal mechanisms unless specifically instructed by the manufacturer.

ట్రబుల్షూటింగ్

• త్రిపాద అస్థిరత:
  • Ensure all Quick Power Lock (QPL) levers are fully closed and locked.
  • Verify that all leg angle selectors are engaged at the same setting.
  • Check the ground surface for unevenness.
• Ball Head Not Holding Position:
  • Ensure the main locking knob is fully tightened.
  • Adjust the friction control knob to increase resistance, especially with heavier cameras.
  • Verify that your equipment's weight does not exceed the ball head's 10kg (22 lbs) capacity.
• Quick Release Plate Sticking/Not Engaging:
  • త్వరిత విడుదల cl ని నిర్ధారించుకోండిamp lever is fully open before inserting the plate.
  • Check for any debris or dirt in the clamp mechanism or on the plate. Clean if necessary.
  • Verify the plate is correctly aligned with the clamp's grooves.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

Manfrotto products are designed for durability and performance. For specific warranty details, including coverage periods and terms, please refer to the warranty card included with your product or visit the official Manfrotto website. For technical support, spare parts, or service inquiries, please contact Manfrotto customer service through their official webసైట్ లేదా అధీకృత సేవా కేంద్రాలు.

Official Manfrotto Webసైట్: www.manfrotto.com