SINOTIMER DDS6619

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter User Manual

Model: DDS6619

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter. This device is designed for measuring active energy consumption in single-phase AC systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter front view

చిత్రం 1: ముందు view of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter, showing the LCD display and terminal connections.

2. భద్రతా సమాచారం

Please observe the following safety precautions to prevent injury and damage to the device:

3. ప్యాకేజీ విషయాలు

ప్యాకేజీని తెరిచిన తర్వాత, దయచేసి అన్ని వస్తువులు ఉన్నాయని మరియు పాడవకుండా ఉన్నాయని ధృవీకరించండి:

4. ఉత్పత్తి లక్షణాలు

The DDS6619 energy meter offers a range of features for efficient power monitoring:

DDS6619 display modes showing temporary and total readings for kWh, voltage, current, power, frequency, and power factor

Image 2: Illustration of the DDS6619 display modes, demonstrating how temporary and total readings for various electrical parameters are shown.

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

5.1 కొలతలు

The meter is designed for standard DIN rail mounting. Refer to the dimensions below for proper planning:

DDS6619 dimensions showing width 36.3mm, height 78.5mm, and depth 65.8mm

Image 3: Dimensional drawing of the DDS6619 meter, indicating its width (36.3mm), height (78.5mm), and depth (65.8mm) for installation planning.

5.2 మౌంటు

  1. కొనసాగే ముందు సర్క్యూట్ బ్రేకర్ వద్ద ప్రధాన విద్యుత్ సరఫరా ఆపివేయబడిందని నిర్ధారించుకోండి.
  2. Mount the DDS6619 meter onto a standard 35mm DIN rail in your electrical panel.
  3. Ensure the meter is securely fastened to prevent movement.

5.3 వైరింగ్ రేఖాచిత్రం

Follow the wiring diagram carefully. Incorrect wiring can cause damage to the meter or electrical system.

DDS6619 wiring diagram showing L and N connections for input and output

Image 4: Wiring diagram for the DDS6619 meter, illustrating the correct connections for live (L) and neutral (N) input and output terminals.

  1. Connect the incoming Live (L) wire to the terminal marked 'L' on the input side.
  2. Connect the incoming Neutral (N) wire to the terminal marked 'N' on the input side.
  3. Connect the outgoing Live (L) wire to the terminal marked 'L' on the output side.
  4. Connect the outgoing Neutral (N) wire to the terminal marked 'N' on the output side.
  5. పవర్‌ను పునరుద్ధరించే ముందు అన్ని కనెక్షన్‌ల బిగుతు మరియు సరైనవి కోసం రెండుసార్లు తనిఖీ చేయండి.

6. ఆపరేటింగ్ సూచనలు

6.1 పవర్ ఆన్

After successful installation and wiring, restore power to the circuit. The meter's LCD display will illuminate, showing the current readings.

6.2 డిస్ప్లే మోడ్‌లు

The meter features a dual-row display. The top row cycles through various temporary electrical parameters, while the bottom row consistently shows the total power consumption (kWh).

6.3 Reset Function for Temporary kWh

The temporary kWh reading can be reset to zero for monitoring consumption over specific periods.

DDS6619 reset function explanation showing temporary and total power consumption and reset button

Image 5: Diagram illustrating the reset function. The top display shows temporary power consumption (resettable), the bottom shows total power consumption (not resettable), and indicates to hold the reset button for 6 seconds.

  1. Locate the reset button on the front panel of the meter.
  2. Press and hold the reset button for approximately 6 seconds.
  3. The temporary kWh value on the top display will reset to zero. The total power consumption on the bottom display will remain unchanged.

7. స్పెసిఫికేషన్లు

పరామితివిలువ
మోడల్DDS6619
వాల్యూమ్ రేట్ చేయబడిందిtage120VAC
రేటింగ్ కరెంట్5(80)ఎ
ఫ్రీక్వెన్సీ60Hz
ఖచ్చితత్వం తరగతి1.0
ప్రదర్శించుబ్లూ బ్యాక్‌లైట్‌తో LCD
మౌంటు35 ఎంఎం డిఎన్ రైల్
మెటీరియల్ఫ్లేమ్ రిటార్డెంట్ ABS
ప్యాకేజీ కొలతలు2.72 x 1.65 x 0.63 అంగుళాలు
బరువు0.48 ఔన్సులు

8. నిర్వహణ

The DDS6619 energy meter requires minimal maintenance. Follow these guidelines to ensure its longevity:

9. ట్రబుల్షూటింగ్

If you encounter issues with your DDS6619 meter, refer to the following common problems and solutions:

సమస్యసాధ్యమైన కారణంపరిష్కారం
No display/Meter not powering onNo power supply; Incorrect wiring; Faulty meterCheck power supply to the circuit. Verify wiring connections according to the diagram. If problem persists, contact support.
సరికాని రీడింగ్‌లుIncorrect wiring; Overload; External interferenceRe-check wiring. Ensure load does not exceed meter's maximum current rating. Isolate from strong electromagnetic fields.
Temporary kWh not resettingReset button not held long enoughPress and hold the reset button for a full 6 seconds.
Total kWh reading is zero or incorrectIncorrect wiring; Meter malfunctionVerify wiring. Note that total kWh cannot be reset. If consistently incorrect, contact support.

10. వారంటీ మరియు మద్దతు

SINOTIMER products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SINOTIMER webసైట్.

మీరు మరిన్ని వివరాలు మరియు సంప్రదింపు వివరాలను ఇక్కడ కనుగొనవచ్చు SINOTIMER Store on Amazon.

సంబంధిత పత్రాలు - DDS6619

ముందుగాview SINOTIMER DDS6619 Series Guide Rail Metering Switch Instruction Manual
Instruction manual for SINOTIMER DDS6619 series guide rail type metering switches. Details technical specifications, wiring, app control via Smart Life/Tuya, operating instructions, and safety precautions for smart energy monitoring.
ముందుగాview SINOTIMER SVP719 యూజర్ మాన్యువల్: వాల్యూమ్tage ప్రొటెక్టర్, ఎనర్జీ మీటర్, మరియు పవర్ కన్సంప్షన్ మానిటర్
SINOTIMER SVP719 కోసం సమగ్ర యూజర్ మాన్యువల్, సర్దుబాటు చేయగల ఓవర్/అండర్ వాల్యూమ్‌గా దాని లక్షణాలను వివరిస్తుంది.tagవిద్యుత్ వినియోగాన్ని పర్యవేక్షించడానికి e ప్రొటెక్టర్, సర్జ్ ప్రొటెక్టర్, ఓవర్-కరెంట్ లిమిట్ రిలే మరియు వాట్/kWh ఎనర్జీ మీటర్ ఉన్నాయి.
ముందుగాview DIN రైల్ కోసం SINOTIMER TM-610 డిజిటల్ టైమ్ స్విచ్ - యూజర్ మాన్యువల్ మరియు స్పెసిఫికేషన్స్
DIN రైలు మౌంటు కోసం రూపొందించబడిన SINOTIMER TM-610 డిజిటల్ టైమ్ స్విచ్ కోసం వివరణాత్మక స్పెసిఫికేషన్లు, వైరింగ్ రేఖాచిత్రాలు మరియు ఆపరేటింగ్ సూచనలు.
ముందుగాview SINOTIMER TM928 సిరీస్ HD LCD డిజిటల్ టైమర్ స్విచ్ - యూజర్ మాన్యువల్ మరియు స్పెసిఫికేషన్స్
SINOTIMER TM928 సిరీస్ డిజిటల్ టైమర్ స్విచ్‌లకు సమగ్ర గైడ్, TM919, TM920, TM928, TM928S, TM928R, మరియు TM929 వంటి మోడళ్ల కోసం ఫీచర్లు, స్పెసిఫికేషన్‌లు, సెటప్ మరియు వైరింగ్‌ను కవర్ చేస్తుంది.
ముందుగాview సినోటైమర్ TM929: గుయా డెల్ టెంపోరిజాడర్ అనలోజికో డయారియో డి 24 హోరాస్
ఎల్ టెంపోరిజాడర్ అనాలోజికో డయారియో సినోటైమర్ TM929 నుండి 24 గంటల వరకు అన్వేషించండి. ఈ మాన్యువల్ ప్రొపోర్షియోనా ఇన్ఫర్మేషన్ డెటల్లాడ్ సోబ్రే సస్ క్యారెక్టరిస్టిక్స్, స్పెసిఫికేషన్స్ టెక్నికాస్ వై రేఖాచిత్రాల కేబుల్‌డో పారా యునా ఫేసిల్ ఇన్‌స్టాలేషన్ మరియు ఆపరేషన్.
ముందుగాview SINOTIMER TM-630A/TM-630S డిజిటల్ టైమర్: ఫీచర్లు మరియు స్పెసిఫికేషన్లు
SINOTIMER TM-630A మరియు TM-630S డిజిటల్ ప్రోగ్రామబుల్ టైమర్‌ల కోసం వివరణాత్మక సాంకేతిక వివరణలు మరియు లక్షణాలు, విద్యుత్ సరఫరా, సమయ పరిధి, కొలతలు మరియు వైరింగ్‌తో సహా.