JONSBO ZA-120B PC కేస్ ఫ్యాన్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. పరిచయం

ధన్యవాదాలు, ధన్యవాదాలు.asing the JONSBO ZA-120B PC Case Fan. This fan is designed to provide efficient cooling for your computer system while offering customizable ARGB lighting effects. Featuring a 28mm thick design, 4-sides infinity mirror, and PWM control, it ensures both aesthetic appeal and optimal performance. This manual provides detailed instructions for installation, operation, and maintenance to help you get the most out of your product.

2. భద్రతా సమాచారం

ఉత్పత్తికి నష్టం జరగకుండా లేదా మీకు మీరే గాయం కాకుండా ఉండటానికి దయచేసి ఈ భద్రతా మార్గదర్శకాలను చదివి అనుసరించండి:

• ఏదైనా అంతర్గత భాగాలను ఇన్‌స్టాల్ చేయడానికి లేదా నిర్వహించడానికి ముందు మీ కంప్యూటర్ నుండి ఎల్లప్పుడూ పవర్‌ను డిస్‌కనెక్ట్ చేయండి.
• Handle the fan by its frame to avoid touching the blades, which could cause damage or injury.
• Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive components.
• Do not attempt to modify the fan or its cables. Unauthorized modifications may void your warranty and pose safety risks.
• ఫ్యాన్‌ను ద్రవాలు మరియు అధిక తేమ నుండి దూరంగా ఉంచండి.
• ఉపయోగంలో లేనప్పుడు ఫ్యాన్‌ని చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.

3. ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• JONSBO ZA-120B PC Case Fan
• మౌంటు స్క్రూలు
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

4. ఉత్పత్తి ముగిసిందిview

The JONSBO ZA-120B is a high-performance PC case fan designed for optimal airflow and stunning visual effects. Key features include:

• 4-Sides Infinity Mirror: Creates a deep, multi-layered lighting illusion from all angles.
• PWM నియంత్రణ: Allows for precise fan speed adjustment (700-2400 RPM) to balance cooling performance and noise levels.
• Addressable RGB (ARGB) Sync: Compatible with motherboard ARGB software (3-pin 5V header) for synchronized lighting effects across your system.
• Simplified Cables: Integrated male and female PWM and ARGB headers for easy daisy-chaining and cable management.
• Aluminum Nameplate: Features a durable aluminum CD pattern nameplate for a premium finish.
• 28mm Thick Design: Enhanced thickness for improved airflow and static pressure.

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to properly install your JONSBO ZA-120B PC Case Fan:

1. మీ వ్యవస్థను సిద్ధం చేయండి:
   • Turn off your computer and disconnect it from the power outlet.
   • Open your computer case to access the fan mounting locations.
2. ఫ్యాన్‌ను మౌంట్ చేయండి:
   • Position the fan in your desired mounting location (e.g., front, top, rear, bottom of the case). Ensure the airflow direction is correct for your cooling setup (typically intake for front/bottom, exhaust for rear/top).
   • Secure the fan to the case using the provided mounting screws. Tighten them evenly to prevent vibration.
3. కనెక్ట్ పవర్ (PWM):
   • Locate an available 4-pin fan header on your motherboard (labeled 'CPU_FAN', 'SYS_FAN', 'CHA_FAN', etc.).
   • Connect the fan's 4-pin PWM cable to the motherboard header. If installing multiple fans, you can daisy-chain them using the integrated male and female PWM heads, then connect the last fan in the chain to a single motherboard header.
4. ARGB లైటింగ్‌ను కనెక్ట్ చేయండి:
   • Locate an available 3-pin 5V ARGB header on your motherboard (often labeled 'ARGB_HEADER', 'D_LED', 'VDG', etc.). 4-పిన్ 12V RGB హెడర్‌కి కనెక్ట్ చేయవద్దు, ఎందుకంటే ఇది LED లను దెబ్బతీస్తుంది.
   • Connect the fan's 3-pin ARGB cable to the motherboard header. Similar to PWM, you can daisy-chain multiple fans using the integrated male and female ARGB heads, connecting the last fan to a single motherboard ARGB header.
   • If your motherboard does not have a 3-pin 5V ARGB header, you may need an external ARGB controller (not included) to control the lighting effects.
5. కేబుల్ నిర్వహణ:
   • Route all cables neatly to ensure proper airflow and a clean build. Use cable ties if necessary.
6. కేస్ మూసివేసి పవర్ ఆన్ చేయండి:
   • Close your computer case and reconnect the power.
   • Power on your computer and verify that the fan is spinning and the ARGB lighting is functioning.

6. ఆపరేషన్

Once installed, the JONSBO ZA-120B fan operates automatically based on your system's settings. Here's how to manage its functions:

• ఫ్యాన్ స్పీడ్ కంట్రోల్ (PWM):
  • The fan speed is controlled via the 4-pin PWM connection to your motherboard.
  • You can adjust fan curves and speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer (e.g., ASUS AI Suite, Gigabyte SIV, MSI Dragon Center).
  • This allows you to optimize for quiet operation at low loads and increased cooling performance under heavy loads.
• ARGB లైటింగ్ నియంత్రణ:
  • The ARGB lighting effects are controlled via the 3-pin 5V ARGB connection to your motherboard.
  • Use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync) to customize colors, patterns, and synchronize lighting with other ARGB components.
  • If using an external ARGB controller, refer to the controller's manual for lighting adjustment instructions.

7. నిర్వహణ

Regular maintenance helps ensure optimal performance and longevity of your fan:

• శుభ్రపరచడం:
  • Periodically (every 3-6 months, depending on environment) clean dust from the fan blades and frame.
  • Use compressed air to blow away dust. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the bearings.
  • For stubborn dust, use a soft, dry cloth or a cotton swab.
• తనిఖీ:
  • Check cables for any signs of wear, fraying, or loose connections.
  • Ensure mounting screws are still tight.

8. ట్రబుల్షూటింగ్

If you encounter issues with your JONSBO ZA-120B fan, refer to the following common problems and solutions:

• ఫ్యాన్ తిరగడం లేదు:
  • Ensure the 4-pin PWM cable is securely connected to a functional motherboard fan header.
  • Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly (e.g., not set to 0 RPM).
  • Test the fan on a different fan header or with a known working fan to rule out a faulty header or fan.
• ARGB Lighting Not Working or Incorrect Colors:
  • Verify the 3-pin ARGB cable is correctly connected to a 3-pin 5V ARGB header on your motherboard. Ensure it is not connected to a 4-pin 12V RGB header.
  • Check your motherboard's ARGB software to ensure lighting is enabled and configured.
  • If daisy-chaining, ensure all connections are secure and the total number of LEDs does not exceed your motherboard/controller's capacity. (Note: This fan has 68+ LEDs, which may exceed some basic controllers).
  • Try updating your motherboard's BIOS and ARGB software to the latest versions.
• అధిక శబ్దం:
  • Ensure the fan is securely mounted and screws are tightened evenly to prevent vibration.
  • ఫ్యాన్ బ్లేడ్లపై పేరుకుపోయిన దుమ్మును శుభ్రం చేయండి.
  • Adjust the fan speed curve in your motherboard's BIOS/UEFI or software to reduce RPMs at lower temperatures.
  • ఫ్యాన్ బ్లేడ్‌లకు ఎలాంటి కేబుల్స్ అడ్డుపడకుండా చూసుకోండి.

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

JONSBO products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official JONSBO webమీ స్థానిక రిటైలర్‌ను సంప్రదించండి లేదా సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

మరింత సహాయం కోసం, దయచేసి సందర్శించండి JONSBO Store on Amazon or contact JONSBO customer service.