షార్కూన్ రెబెల్ P10 850W ATX 3.1 పవర్ సప్లై యూనిట్ యూజర్ మాన్యువల్

1. పరిచయం

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. భద్రతా సమాచారం

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• విద్యుత్ ప్రమాదం: The PSU contains high voltage components. Do not open the PSU casing. లోపల వినియోగదారు-సేవ చేయదగిన భాగాలు లేవు.
• వృత్తిపరమైన సంస్థాపన: Installation should be performed by a qualified technician or experienced user.
• వెంటిలేషన్: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• పర్యావరణం: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• గ్రౌండింగ్: Always connect the PSU to a grounded power outlet using the provided power cable.
• పవర్ ఆఫ్: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• ఎసి పవర్ కేబుల్
• మౌంటు స్క్రూలు
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. మీ వ్యవస్థను సిద్ధం చేయండి: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. పాత PSU ని తీసివేయండి (వర్తిస్తే): Disconnect all cables from your old PSU and remove it from the case.
3. కొత్త PSU ని మౌంట్ చేయండి: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   చిత్రం: ప్రధాన view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. మదర్‌బోర్డ్ పవర్‌ను కనెక్ట్ చేయండి: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. CPU పవర్ కనెక్ట్ చేయండి: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. PCIe పవర్‌ను కనెక్ట్ చేయండి: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. కేబుల్ నిర్వహణ: Organize cables neatly to ensure proper airflow and a tidy build.
9. కేస్ మూసివేసి AC పవర్‌ను కనెక్ట్ చేయండి: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   చిత్రం: వెనుక view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. ఆపరేటింగ్ సూచనలు

Once the PSU is installed and all connections are secure:

1. పవర్ ఆన్: Flip the power switch on the back of the PSU to the 'ON' position.
2. సిస్టమ్ ప్రారంభ: Press the power button on your computer case to start your system.
3. నిశ్శబ్ద ఆపరేషన్: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. నిర్వహణ

Regular maintenance helps ensure the longevity and optimal performance of your PSU:

• దుమ్ము తొలగింపు: Periodically clean dust from the PSU's fan and ventilation grilles using compressed air. Ensure the system is powered off and unplugged before cleaning.
• కేబుల్ తనిఖీ: Occasionally check that all power cables are securely connected and not obstructing airflow.
• స్థిరమైన వాల్యూమ్tage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. ట్రబుల్షూటింగ్

If you encounter issues with your PSU, consider the following:

• శక్తి లేదు:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • Verify the power switch on the back of the PSU is in the 'ON' position.
  • Check the wall outlet by plugging in another device.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• సిస్టమ్ అస్థిరత/క్రాష్‌లు:
  • మీ సిస్టమ్ యొక్క విద్యుత్ అవసరాలు PSU యొక్క 850W సామర్థ్యాన్ని మించకుండా చూసుకోండి.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• అసాధారణ శబ్దం:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webసైట్.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webసైట్:

www.sharkoon.com