ఉత్పత్తి ముగిసిందిview
The roborock F25 RT is an advanced wet and dry vacuum cleaner designed for comprehensive hard floor cleaning. It combines powerful suction with efficient mopping capabilities, featuring innovative self-cleaning and drying technologies to ensure optimal performance and hygiene. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Image: The roborock F25 RT wet dry vacuum cleaner shown with its included washable filters and floor cleaning solution.
ముఖ్య లక్షణాలు:
- All-in-One Hard Floor Cleaning: Combines wet dry vacuuming with 180° flat reach for comprehensive cleaning.
- Powerful Mopping Performance: Features 20000Pa suction power and 450 rpm spin mopping for effective dirt removal.
- Hot Water Self-Cleaning & Hot Air Drying: Utilizes 194°F hot water for self-cleaning and 194°F hot air for drying, preventing odors and ensuring hygiene.
- సులభమైన ఫిల్టర్ భర్తీ: Designed for quick and effortless filter changes without tools.
- High Performance Filter: Teflon-coated filter accessory provides long-lasting, effective air filtration.
సెటప్ మరియు ప్రారంభ ఉపయోగం
1. అన్ప్యాకింగ్ మరియు అసెంబ్లీ
Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present. Assemble the handle to the main body of the vacuum cleaner by aligning the connection points and pushing firmly until it clicks into place.
2. బ్యాటరీ సంస్థాపన మరియు ఛార్జింగ్
Insert the battery pack into its designated slot on the vacuum cleaner. Ensure it is securely seated. For first-time use, fully charge the device. Place the vacuum cleaner on its charging dock. The charging indicator lights will illuminate to show charging status. A full charge typically takes several hours.
Image: A user demonstrating the easy installation of the battery pack into the roborock F25 RT vacuum cleaner.
3. శుభ్రమైన నీటి తొట్టిని నింపడం
Locate the clean water tank. Open the cap and fill it with clean tap water. For enhanced cleaning, you may add a small amount of roborock-approved floor cleaning solution, following the solution's instructions for dilution. Close the cap securely and reinsert the tank into the device.
ఆపరేటింగ్ సూచనలు
1. పవర్ ఆన్ చేయడం మరియు మోడ్ను ఎంచుకోవడం
Press the power button to turn on the roborock F25 RT. The device will typically start in a default cleaning mode. Use the mode selection button to switch between different cleaning modes, such as standard wet vacuuming, dry vacuuming, or specific spot cleaning functions, if available.
Image: An illustration highlighting the core functionalities of the roborock F25 RT, including its powerful suction, hot water cleaning, and flexible design.
2. క్లీనింగ్ పనితీరు
The roborock F25 RT delivers 20000Pa suction power and 450 rpm spin mopping to effectively clean various hard floor surfaces. Guide the vacuum cleaner across the floor at a steady pace. For heavily soiled areas, you may need to pass over them multiple times.
Image: A visual demonstration of the roborock F25 RT's cleaning efficacy, illustrating a floor before and after a liquid mess has been cleaned.
3. Reaching Difficult Areas
The 180° lie-flat design allows the roborock F25 RT to reach under furniture and into tight spaces with ease, ensuring thorough cleaning even in hidden areas.
Image: The roborock F25 RT demonstrating its 180-degree lie-flat capability, allowing it to clean effectively under low-clearance furniture.
4. అనుకూలత
This product, including its washable filter replacement, is specifically designed for compatibility with the roborock F25 Series Wet Dry Vacuum Cleaner.
Image: The roborock F25 RT vacuum cleaner with an overlay indicating its compatibility with the F25 series filter, emphasizing seamless integration.
నిర్వహణ
1. Hot Water Self-Cleaning and Hot Air Drying
After each use, return the roborock F25 RT to its charging dock to initiate the self-cleaning cycle. The device uses 194°F hot water to clean the roller brush and internal components, effectively melting grease and debris. Following the wash, 194°F hot air drying eliminates moisture and odors, ensuring the device remains clean and ready for its next use.
Image: A visual explanation of the roborock F25 RT's automated self-cleaning and drying functions, highlighting the use of high-temperature water and air.
2. మురికి నీటి తొట్టిని ఖాళీ చేయడం
Regularly empty the dirty water tank after each cleaning session. Remove the tank, open its lid, and dispose of the dirty water. Rinse the tank with clean water to prevent residue buildup and odors. Reinstall the tank securely.
3. ఫిల్టర్ క్లీనింగ్ మరియు రీప్లేస్మెంట్
The washable filter should be cleaned regularly to maintain optimal suction and air filtration. Remove the filter from its compartment. Rinse it under running water until clean. Allow the filter to air dry completely before reinserting it. For best performance, replace the filter periodically, especially if you notice a decrease in suction or an increase in motor noise.
Image: A washable filter being cleaned under running water, illustrating its design for repeated use and easy maintenance.
4. Roller Brush Maintenance
Periodically inspect the roller brush for tangled hair or debris. The roborock F25 RT features dual scrapers to achieve a 0% tangle rate, minimizing hair wrap. If necessary, remove the roller brush and use the provided cleaning tool or scissors to cut and remove any entangled hair or fibers. Rinse the brush if needed and allow it to dry before reinstallation.
చిత్రం: వివరణాత్మక view of the roborock F25 RT's roller brush system, highlighting the dual scrapers designed to prevent hair tangles and ensure streak-free cleaning.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| పరికరం పవర్ ఆన్ చేయదు. | బ్యాటరీ ఛార్జ్ చేయబడలేదు లేదా సరిగ్గా ఇన్స్టాల్ చేయబడలేదు. | Ensure the battery is fully charged and correctly inserted. Check charging dock connection. |
| పేలవమైన చూషణ పనితీరు. | Dirty filter, clogged air duct, or full dirty water tank. | Clean or replace the filter. Check for and clear any blockages in the air duct. Empty the dirty water tank. |
| Water streaks on floor. | Dirty roller brush or insufficient water flow. | Clean the roller brush thoroughly. Ensure the clean water tank is filled and properly installed. |
| Unpleasant odor from device. | Dirty water tank or roller brush not properly dried. | Empty and rinse the dirty water tank immediately after use. Ensure the self-cleaning and hot air drying cycle completes fully. Manually dry components if necessary. |
If the problem persists after attempting these solutions, please refer to the warranty and support section for further assistance.
స్పెసిఫికేషన్లు
- మోడల్: F25 RT ద్వారా మరిన్ని
- రకం: వెట్ డ్రై వాక్యూమ్ క్లీనర్
- చూషణ శక్తి: 20000పా
- Roller Brush Speed: 450 rpm
- Self-Cleaning Water Temperature: 194°F (90°C)
- Drying Air Temperature: 194°F (90°C)
- డిజైన్ ఫీచర్: 180° Lie-Flat
- ఫిల్టర్ రకం: Washable, Teflon-coated
- ASIN: B0F66N8YVG
వారంటీ మరియు మద్దతు
roborock products are manufactured to high quality standards and are covered by a limited warranty from the date of purchase. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact roborock customer service. Contact information can typically be found on the official roborock webసైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్లో.
When contacting support, please have your product model (F25 RT) and purchase information readily available to expedite the process.
