1. పరిచయం
This manual provides detailed instructions for the M-VAVE WP-10 Wireless In-Ear Monitor System. This system is designed for musicians and performers requiring a reliable, low-latency audio monitoring solution for studio rehearsals and live stage performances. It features 2.4GHz digital transmission, stereo/mono modes, and automatic pairing for ease of use.
1.1 ప్యాకేజీ విషయాలు
క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని దయచేసి ధృవీకరించండి:
- 1 x ట్రాన్స్మిటర్
- 1 x రిసీవర్
- 2 x 3.5mm to 3.5mm Audio Cables
- 1 x USB A to Dual USB C Charging Cable
Figure 1.1: Package Contents. Includes one transmitter, one receiver, two audio cables, and one USB-C charging cable.
2. భద్రతా సమాచారం
Please read and understand the following safety precautions before using the M-VAVE WP-10 system:
- బ్యాటరీ హ్యాండ్లింగ్: Do not short-circuit or expose the battery to fire. Dispose of batteries in accordance with local regulations.
- జోక్యం: This device operates on 2.4GHz frequency and may interfere with other wireless devices. Avoid using it in environments with high 2.4GHz traffic if interference occurs.
- వినియోగ పరిమితులు: Do not use this device while driving or operating heavy machinery.
- నీరు మరియు తేమ: పరికరాన్ని నీరు, తేమ మరియు తీవ్రమైన ఉష్ణోగ్రతల నుండి దూరంగా ఉంచండి.
- వేరుచేయడం: పరికరాన్ని విడదీయడానికి లేదా సవరించడానికి ప్రయత్నించవద్దు. ఇది వారంటీని రద్దు చేస్తుంది మరియు నష్టం లేదా గాయానికి కారణం కావచ్చు.
3 ఫీచర్లు
The M-VAVE WP-10 Wireless In-Ear Monitor System offers the following key features:
- అధిక-నాణ్యత ఆడియో: Utilizes 24-bit/48KHz lossless digital transmission for clear, low-latency audio with a 20Hz-20KHz frequency response and 105 dB dynamic range.
- స్టీరియో/మోనో స్విచ్: Easily switch between mono and stereo audio transmission modes.
- అంతర్నిర్మిత పునర్వినియోగపరచదగిన బ్యాటరీ: Provides up to 6 hours of operation on a full charge, rechargeable via USB.
- స్వయంచాలక జత చేయడం: Simple auto-pairing between transmitter and receiver upon power-on.
- One-to-Many Support: A single transmitter can connect to multiple receivers of the same model, supporting up to 6 sets simultaneously without interference.
- వైర్లెస్ పరిధి: Up to 90 feet (approximately 30 meters) in open spaces.
4. సెటప్ గైడ్
4.1 పరికరాలను ఛార్జ్ చేయడం
Before initial use, fully charge both the transmitter and receiver. Use the provided USB A to dual USB C charging cable to connect both units to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show charging status.
Figure 4.1: Charging the Transmitter and Receiver. Both units can be charged simultaneously using the included dual USB-C cable.
4.2 ట్రాన్స్మిటర్ను కనెక్ట్ చేస్తోంది
Connect the transmitter to your audio source (e.g., mixer, instrument, sound card, mobile phone) using one of the provided 3.5mm audio cables. Ensure the connection is secure.
Figure 4.2: Transmitter Connectivity. The transmitter can be connected to a wide range of audio output devices.
4.3 రిసీవర్ను కనెక్ట్ చేస్తోంది
Connect your in-ear monitors (IEMs) or headphones to the receiver's 3.5mm output jack.
4.4 ఆటోమేటిక్ జత చేయడం
The WP-10 system features automatic pairing. To pair the transmitter and receiver:
- Ensure both the transmitter and receiver are fully charged.
- Turn on both the transmitter and receiver using their respective power switches.
- Simultaneously press and hold the "PAIR" button on both the transmitter and receiver.
- The green indicator light will flash during pairing and become solid once successfully paired.
Figure 4.3: Automatic Pairing. Pressing the 'PAIR' button on both units initiates the pairing process.
5. ఆపరేటింగ్ సూచనలు
5.1 పవర్ ఆన్/ఆఫ్
Slide the "ON/OFF" switch on both the transmitter and receiver to the "ON" position to power them on. Slide to "OFF" to power them down.
5.2 వాల్యూమ్ నియంత్రణ
The receiver features "VOL+" and "VOL-" buttons to adjust the output volume to your connected in-ear monitors or headphones.
5.3 Mono/Stereo Mode Selection
Both the transmitter and receiver have a "MONO/STEREO" switch. Ensure both units are set to the desired mode (either MONO or STEREO) for correct audio transmission. For true stereo audio, both units must be set to STEREO.
5.4 One-to-Many Operation
The M-VAVE WP-10 system supports connecting one transmitter to multiple receivers. This is ideal for band rehearsals or stage monitoring where multiple performers need to hear the same mix. Up to 6 sets of devices can operate simultaneously without interference.
Figure 5.1: One-to-Many Configuration. A single transmitter can broadcast to multiple receivers for group monitoring.
6. నిర్వహణ
6.1 శుభ్రపరచడం
Wipe the devices with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
6.2 బ్యాటరీ సంరక్షణ
- బ్యాటరీ జీవితకాలాన్ని పొడిగించడానికి, తరచుగా యూనిట్లను పూర్తిగా డిశ్చార్జ్ చేయకుండా ఉండండి.
- Charge the devices regularly, even if not in use, to maintain battery health.
- పరికరాలను ఎక్కువ కాలం ఉపయోగంలో లేనప్పుడు చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
6.3 నిల్వ
When storing the system, ensure both units are powered off. Keep them in a protective case or bag to prevent physical damage.
7. ట్రబుల్షూటింగ్
- ధ్వని లేదు:
- Ensure both transmitter and receiver are powered on and charged.
- Verify that the transmitter is correctly connected to the audio source and the receiver to your IEMs/headphones.
- Check the volume levels on both the receiver and your audio source.
- Confirm that the transmitter and receiver are successfully paired (solid green light). If not, re-pair them as per Section 4.4.
- జోక్యం/పేలవమైన ధ్వని నాణ్యత:
- Move the transmitter and receiver closer to each other. The maximum range is 90 feet in open spaces, but obstacles can reduce this.
- Avoid using the system near other 2.4GHz wireless devices (Wi-Fi routers, other wireless audio systems) that might cause interference.
- Ensure both units are set to the same MONO or STEREO mode.
- ఏవైనా సమస్యల కోసం ఆడియో మూలాన్ని తనిఖీ చేయండి.
- జత చేయలేము:
- Ensure both units are powered on and have sufficient battery charge.
- Press and hold the "PAIR" button on both units simultaneously until the green light becomes solid.
- If issues persist, power cycle both devices and attempt pairing again.
- తక్కువ బ్యాటరీ జీవితం:
- Ensure the devices are fully charged before use.
- Battery performance can degrade over time. If battery life significantly shortens, consider replacing the unit if within warranty.
8. స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ సంఖ్య | WP-10 |
| ట్రాన్స్మిషన్ ఫ్రీక్వెన్సీ | 2.4GHz |
| Sampలింగ్ రేటు | 24-బిట్ / 48 కి.హెర్ట్జ్ |
| జాప్యం | < 12మి.సి |
| వైర్లెస్ రేంజ్ | Up to 30 meters (90 feet) in open spaces, 15 meters with walls |
| బ్యాటరీ కెపాసిటీ | 550mAh (each unit) |
| బ్యాటరీ లైఫ్ | 6 గంటల వరకు |
| ఛార్జింగ్ పద్ధతి | USB-C |
| సిగ్నల్-టు-శబ్ద నిష్పత్తి | -98dB |
| డైనమిక్ రేంజ్ | >105dB |
| ఫ్రీక్వెన్సీ రెస్పాన్స్ | 20Hz to 20kHz (+1dB/-3dB) |
| Product Dimensions (Single Unit) | 54 x 45 x 13 మిమీ (2.2 x 1.8 x 0.8 అంగుళాలు) |
| Item Weight (Single Unit) | 31గ్రా (0.11 పౌండ్లు) |
| రంగు | నలుపు |
Figure 8.1: Product Dimensions. Detailed measurements of a single M-VAVE WP-10 unit.
9. వారంటీ మరియు మద్దతు
9.1 వారంటీ సమాచారం
The M-VAVE WP-10 Wireless In-Ear Monitor System comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper storage.
9.2 కస్టమర్ మద్దతు
For technical assistance, warranty claims, or any questions regarding your M-VAVE WP-10 system, please contact the seller or manufacturer's customer support. Refer to your purchase documentation for specific contact details.
