ANYSECU W2 Pro 4G LTE Car Radio User Manual

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your ANYSECU W2 Pro 4G LTE Car Radio. This device combines advanced communication features with the versatility of the Android 11 operating system, offering GPS navigation, Bluetooth, and Wi-Fi connectivity. Please read this manual thoroughly before using the product to ensure proper function and safety.

Image 1.1: The ANYSECU W2 Pro 4G LTE Car Radio with its attached microphone. This image displays the front view of the radio unit, highlighting the screen, control buttons, and the connected hand microphone.

2. ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని అంశాలు మీ ఉత్పత్తి ప్యాకేజీలో ఉన్నాయని నిర్ధారించుకోండి:

• రేడియో బాడీ
• యాంటెన్నా
• బ్యాటరీ
• పవర్ కేబుల్
• అడాప్టర్
• క్లిప్
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

చిత్రం 2.1: ఒక ఓవర్view of the standard package contents for the ANYSECU W2 Pro. This image shows the main radio unit, bracket, microphone, 4G antenna, microphone holder, GPS antenna, and power cable.

3. సెటప్

3.1. భౌతిక సంస్థాపన మరియు వైరింగ్

Proper installation is crucial for optimal performance. Ensure the device is securely mounted in your vehicle and connected to the power source correctly.

1. మౌంటు: Use the provided bracket to securely mount the radio body in a suitable location within your vehicle, ensuring it does not obstruct your view లేదా డ్రైవింగ్ నియంత్రణలలో జోక్యం చేసుకోవచ్చు.
2. యాంటెన్నా కనెక్షన్: Connect the included 4G antenna to the designated port on the radio.
3. GPS Antenna Connection: Connect the GPS antenna to its dedicated port and place it in a location with a clear view of the sky for best signal reception.
4. పవర్ కనెక్షన్: Connect the power cable according to the wiring schematics below.

Image 3.1: Wiring schematics for the ANYSECU W2 Pro. The red wire is for positive power, the black wire is for negative/ground, and the blue wire is for ACC (Accessory) power, typically connected to the vehicle's ignition switch.

3.2. ప్రారంభ పవర్ ఆన్

After completing the physical installation and wiring:

1. అన్ని కనెక్షన్లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.
2. Press and hold the power button on the radio body until the screen illuminates.
3. The device will boot into the Android 11 operating system. Follow any on-screen prompts for initial setup.

3.3 నెట్‌వర్క్ కనెక్టివిటీ

The W2 Pro supports 4G LTE, Wi-Fi, and Bluetooth connectivity.

• 4G LTE: Insert a compatible SIM card (not included) into the designated slot. Configure APN settings if required by your carrier.
• Wi-Fi: Navigate to Settings > Network & internet > Wi-Fi to connect to available Wi-Fi networks.
• బ్లూటూత్: Navigate to Settings > Connected devices > Bluetooth to pair with Bluetooth accessories such as headsets or external speakers.

3.4. GPS Setup

The built-in GPS module provides accurate positioning. Ensure the GPS antenna is properly connected and has an unobstructed view of the sky. The device will automatically acquire GPS signals. You can use pre-installed navigation apps or download others from the Google Play Store.

Image 3.2: The ANYSECU W2 Pro displaying a real-time location map on its screen, illustrating its GPS positioning capabilities. This image highlights the device's navigation function within an urban setting.

4. ఆపరేటింగ్ సూచనలు

4.1. Touch Screen and Basic Navigation

The W2 Pro features a 3.5-inch touch screen for intuitive operation.

• నొక్కండి: ఒక అంశాన్ని ఎంచుకోండి లేదా అప్లికేషన్‌ను తెరవండి.
• స్వైప్: మెనూల ద్వారా నావిగేట్ చేయండి లేదా కంటెంట్‌ను స్క్రోల్ చేయండి.
• పించ్-టు-జూమ్: Adjust map views or image sizes.

Image 4.1: The 3.5-inch touch screen of the ANYSECU W2 Pro displaying various Android applications. This image demonstrates the visual clarity and interactive nature of the screen for accessing device functions.

4.2. ఆండ్రాయిడ్ 11 సిస్టమ్

The device runs on Android 11, providing access to a wide range of applications via the Google Play Store. Navigate the interface similar to any Android smartphone or tablet.

4.3. Communication (Zello & Real PTT)

The W2 Pro is compatible with Zello PTT and Real PTT platforms for push-to-talk communication over 4G LTE or Wi-Fi networks.

1. యాప్‌లను ఇన్‌స్టాల్ చేయండి: Download and install Zello or Real PTT from the Google Play Store.
2. ఖాతా సెటప్: Create or log in to your account within the respective application.
3. PTT Function: Use the dedicated PTT button on the microphone to initiate and end transmissions.
4. Talk Modes: The device supports single call, group call, and all call modes, configurable within the PTT applications.

4.4. SOS Features

The device is equipped with dedicated SOS buttons for emergency situations. Configure emergency contacts and settings within the device's system or a dedicated emergency application (if available).

5. నిర్వహణ

• శుభ్రపరచడం: పరికరాన్ని శుభ్రం చేయడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి. రాపిడి క్లీనర్లు లేదా ద్రావకాలను నివారించండి.
• పర్యావరణ పరిస్థితులు: Operate the device within specified temperature and humidity ranges. Avoid exposure to extreme heat, cold, or moisture.
• సాఫ్ట్‌వేర్ అప్‌డేట్‌లు: Periodically check for system updates via the Android settings to ensure optimal performance and security.

6. ట్రబుల్షూటింగ్

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

8.1. వారంటీ సమాచారం

The ANYSECU W2 Pro radio body is covered by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

8.2. కస్టమర్ మద్దతు

For technical assistance, warranty claims, or further inquiries, please contact ANYSECU customer support through the official website or your point of purchase. Please have your model number (W2Pro-US-11) and purchase details ready when contacting support.