పరిచయం
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of the InSinkErator AS101K-8 AquaSaver Commercial Disposal Control Panel. The AquaSaver system is designed to optimize water usage for InSinkErator commercial disposer systems by sensing motor load and regulating water flow during grinding and non-grinding operations. Proper use of this control panel can lead to significant water savings.
ముఖ్యమైన భద్రతా సమాచారం
హెచ్చరిక:
- యూనిట్ను సర్వీసింగ్ చేయడానికి లేదా శుభ్రపరిచే ముందు ఎల్లప్పుడూ పవర్ను డిస్కనెక్ట్ చేయండి.
- This control panel is designed for use only with InSinkErator commercial disposers.
- అన్ని స్థానిక మరియు జాతీయ విద్యుత్ కోడ్లకు అనుగుణంగా అర్హత కలిగిన సిబ్బందిచే సంస్థాపన మరియు సేవ నిర్వహించబడాలి.
- విద్యుత్ షాక్ను నివారించడానికి సరైన గ్రౌండింగ్ను నిర్ధారించుకోండి.
- ఏదైనా భాగం దెబ్బతిన్నా లేదా తప్పిపోయినా యూనిట్ను ఆపరేట్ చేయవద్దు.
Refer to the warning labels on the product for specific safety instructions.
మూర్తి 1: ముందు view of the InSinkErator AS101K-8 AquaSaver Control Panel, showing the warning labels and control buttons.
కీ ఫీచర్లు
- Solid state control circuit for reliable operation.
- NEMA 4 - stainless steel enclosure for durability and protection against environmental factors.
- Automatic reversing magnetic contactors for extended motor life.
- Includes two solenoids and two flow control valves for precise water management.
- 10-minute timed run option for specific operational needs.
- 24-volt operation for safety and efficiency.
- Programmable post-flush feature to ensure thorough cleaning.
- Automatic shut-off in case of power interruption for safety.
- Line disconnect switch located on the front panel for easy access and safety.
సెటప్ మరియు ఇన్స్టాలేషన్
Installation of the InSinkErator AS101K-8 AquaSaver Control Panel should only be performed by a qualified electrician or service technician. Adhere to all local and national electrical and plumbing codes.
నియంత్రణ ప్యానెల్ మౌంటు
- Select a suitable location for mounting the NEMA 4 stainless steel enclosure, ensuring it is easily accessible for operation and maintenance, and protected from excessive physical impact.
- Use appropriate fasteners to securely mount the panel to a sturdy surface. The panel dimensions are 7 x 10 x 15.75 inches and it weighs 25 pounds.
విద్యుత్ కనెక్షన్లు
- Ensure the main power supply to the disposer system is disconnected at the circuit breaker before making any electrical connections.
- Connect the incoming 380/460V power supply to the designated terminals within the control panel.
- Connect the control panel output to the InSinkErator commercial disposer motor.
- Connect the 24-volt control wiring as per the wiring diagram (not included in this manual, refer to product packaging or manufacturer's webసైట్).
- Ensure all connections are tight and secure, and proper grounding is established.
నీటి కనెక్షన్లు
- Install the two solenoids and two flow control valves into the water supply line feeding the disposer.
- Connect the control wiring from the AquaSaver panel to the solenoids as per the wiring diagram.
- Ensure all plumbing connections are leak-free.
మూర్తి 2: వైపు view of the InSinkErator AS101K-8 AquaSaver Control Panel, highlighting the mounting brackets for installation.
ఆపరేటింగ్ సూచనలు
ప్రారంభ పవర్-అప్
- After installation is complete and all connections are verified, turn on the main power supply to the disposer system at the circuit breaker.
- Engage the line disconnect switch on the front panel to power the control unit.
సాధారణ ఆపరేషన్
- The AquaSaver system will automatically sense the load on the disposer motor.
- During grinding operations, the system will regulate the water flow to the disposer as needed.
- During non-grinding periods, water flow will be reduced or stopped to conserve water.
10-Minute Timed Run Option
The control panel includes a 10-minute timed run option for specific applications. Consult the detailed programming guide (refer to product packaging or manufacturer's website) for instructions on activating and configuring this feature.
Programmable Post-Flush
The programmable post-flush feature ensures that the disposer and drain lines are thoroughly cleared after use. Refer to the detailed programming guide for instructions on setting the duration and activation of the post-flush cycle.
నిర్వహణ
Regular maintenance ensures optimal performance and longevity of your AquaSaver control panel.
- నెలవారీ: Inspect the exterior of the control panel for any signs of damage or corrosion. Clean the stainless steel enclosure with a mild, non-abrasive cleaner.
- త్రైమాసిక: With power disconnected, open the enclosure and visually inspect all electrical connections for tightness. Check for any signs of wear on wiring.
- వార్షికంగా: Have a qualified technician inspect the solenoids and flow control valves for proper operation and calibrate if necessary.
జాగ్రత్త:
Always disconnect power to the unit before performing any internal maintenance or inspection.
ట్రబుల్షూటింగ్
This section provides solutions to common issues. For problems not listed here, contact InSinkErator customer support or a qualified service technician.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Control panel has no power. | Main power supply off; Line disconnect switch off; Blown fuse/tripped breaker. | Check main power supply; Engage line disconnect switch; Check and reset circuit breaker or replace fuse. |
| Disposer not receiving water. | Water supply off; Solenoid valve malfunction; Flow control valve blockage. | Check water supply; Inspect and test solenoids; Check flow control valves for obstructions. |
| Disposer motor not starting. | Motor overload; Faulty contactor; Wiring issue. | Check disposer for jams and clear; Inspect automatic reversing magnetic contactors; Verify all electrical connections. |
| అధిక నీటి వినియోగం. | AquaSaver sensor malfunction; Flow control valve issue; Incorrect programming. | Contact service technician to check sensor; Inspect flow control valves; Review programming settings. |
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | AS101K-8 |
| ఇన్పుట్ వాల్యూమ్tage | 380/460V |
| నియంత్రణ వాల్యూమ్tage | 24V |
| ఎన్క్లోజర్ రకం | NEMA 4 - Stainless Steel |
| ఉత్పత్తి కొలతలు (H x W x D) | 15.75 x 10 x 7 అంగుళాలు |
| వస్తువు బరువు | 25 పౌండ్లు |
| చేర్చబడిన భాగాలు | Two solenoids, two flow control valves |
| తయారీదారు | ఇన్సింక్ఎరేటర్ |
| UPC | 050375019510 |
వారంటీ మరియు మద్దతు
For warranty information, technical support, or to locate authorized service centers, please visit the official InSinkErator website or contact their customer service department. Keep your purchase receipt and model number (AS101K-8) handy when contacting support.
ఆన్లైన్ వనరులు: www.insinkerator.com
కస్టమర్ సేవ: Refer to the InSinkErator webప్రస్తుత సంప్రదింపు సమాచారం కోసం సైట్.
