SEBSON Outdoor Motion Sensor IP65 User Manual

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Sensor IP65, Model IR_OUT_GA. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: The SEBSON Outdoor Motion Sensor IP65, a charcoal-colored unit designed for wall or ceiling mounting.

2. భద్రతా సూచనలు

• స్థానిక వైరింగ్ నిబంధనలకు అనుగుణంగా అర్హత కలిగిన ఎలక్ట్రీషియన్ ద్వారా ఇన్‌స్టాలేషన్ నిర్వహించాలి.
• సంస్థాపన లేదా నిర్వహణకు ముందు విద్యుత్ సరఫరా డిస్‌కనెక్ట్ చేయబడిందని నిర్ధారించుకోండి.
• Do not exceed the maximum load capacity specified in the technical data.
• This product is designed for outdoor use with IP65 protection; however, avoid direct high-pressure water jets.
• పిల్లలకు దూరంగా ఉంచండి.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీ వీటిని కలిగి ఉంటుంది:

• 1 x SEBSON IR Motion Sensor IP65
• మౌంటు ఉపకరణాలు (స్క్రూలు, వాల్ ప్లగ్‌లు)
• సూచనల మాన్యువల్ (ఈ పత్రం)

4. ఉత్పత్తి లక్షణాలు

The SEBSON Outdoor Motion Sensor IP65 is an infrared (IR) motion sensor designed for reliable outdoor use. Key features include:

• బహుముఖ మౌంటు: Suitable for both wall and ceiling surface mounting.
• విస్తృత గుర్తింపు పరిధి: Up to 24 meters with a 360° angle when ceiling-mounted, or 12 meters with a 180° angle when wall-mounted.
• ప్రోగ్రామబుల్ సెట్టింగ్‌లు: Adjustable duty cycle (light duration), ambient brightness (LUX), and detection sensitivity.
• స్వివెల్ ఫంక్షన్: The sensor head can be vertically swiveled by 180° for precise detection area adjustment.
• High Protection Class: IP65 rated for outdoor weather resistance.
• LED అనుకూలమైనది: Supports LED lighting up to 600W and incandescent lamp1200W వరకు s.

చిత్రం 4.1: ముగిసిందిview of key features including detection range, power compatibility, IP rating, and adjustable settings.

Image 4.2: The sensor head can be swiveled vertically by 180 degrees to adjust the detection area.

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

5.1 మౌంటు స్థానం

Choose a suitable location for mounting the sensor. Consider the desired detection area and avoid placing it near heat sources, air conditioning units, or areas with frequent, unwanted movement (e.g., swaying branches) that could trigger false detections.

• సీలింగ్ మౌంటు: Provides a 360° detection angle with a range of 10m to 24m. Ideal for open areas.
• వాల్ మౌంటు: Provides a 180° detection angle with a range of 5m to 12m. Suitable for pathways or specific directional coverage.

చిత్రం 5.1: ఉదాample of the motion sensor installed on an outdoor wall.

Image 5.2: Detection range and angle variations for ceiling and wall installations.

5.2 Wiring (3-Wire Installation)

The sensor requires a 3-wire connection. Ensure the power supply is OFF before proceeding.

1. Connect the Live (L) wire from the power supply to the Live input terminal on the sensor.
2. Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the sensor.
3. Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture.
4. Connect the Neutral (N) wire from the lighting fixture to the Neutral input terminal on the sensor (or directly to the main Neutral).
5. అన్ని కనెక్షన్లు సురక్షితంగా ఉన్నాయని మరియు సరిగ్గా ఇన్సులేట్ చేయబడిందని నిర్ధారించుకోండి.

Image 5.3: Base of the sensor showing wiring access points.

5.3 భౌతిక సంస్థాపన

1. Mark the drilling points on the wall or ceiling using the sensor's base as a template.
2. అవసరమైతే రంధ్రాలు వేసి, వాల్ ప్లగ్‌లను చొప్పించండి.
3. Secure the sensor base to the mounting surface with screws.
4. Perform wiring as described in section 5.2.
5. Attach the sensor body to the base, ensuring a tight seal for IP65 protection.
6. Adjust the sensor head to the desired angle using the swivel mechanism.

6. ఆపరేటింగ్ సూచనలు మరియు సర్దుబాట్లు

The SEBSON motion sensor features three adjustable settings to customize its operation:

Image 6.1: Adjustment dials for TIME, SENS (Sensitivity), and LUX (Ambient Brightness).

6.1 TIME (Switch-off Delay)

This dial adjusts how long the connected light remains ON after motion is no longer detected. The range is approximately 10 seconds to 15 minutes.

• Turn the dial clockwise to increase the duration.
• Turn the dial counter-clockwise to decrease the duration.

6.2 LUX (Ambient Brightness)

This dial determines the ambient light level at which the sensor will activate. The range is 0.1 LUX (darkness) to 2000 LUX (daylight).

• Set to the 'sun' symbol (max LUX) for activation during both day and night.
• Set to the 'moon' symbol (min LUX) for activation only in low light conditions or darkness.
• Adjust incrementally to find the desired activation threshold.

6.3 SENS (Sensitivity/Detection Range)

This dial adjusts the sensitivity of the motion detection, effectively controlling the detection range.

• Turn clockwise for maximum sensitivity and detection range.
• Turn counter-clockwise for minimum sensitivity and detection range.
• Adjust to prevent false triggers from distant objects or small animals.

7. నిర్వహణ

• Regularly clean the sensor lens with a soft, damp cloth to ensure optimal detection performance. Do not use abrasive cleaners.
• Check wiring connections periodically for any signs of wear or corrosion.
• Ensure the sensor is free from obstructions like spiderwebs, leaves, or snow, which can impair its function.
• No user-serviceable parts inside. Do not attempt to open the main housing.

8. ట్రబుల్షూటింగ్

9. స్పెసిఫికేషన్లు

చిత్రం 9.1: ఉత్పత్తి కొలతలు.

10. వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webవారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.