ఎలిటెక్ డిజిటల్ మానిఫోల్డ్ గేజ్ సెట్ DMG-2SE ఇన్‌స్ట్రక్షన్ మాన్యువల్

పరిచయం

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Elitech Digital Manifold Gauge Set, model DMG-2SE. This device is designed for precise measurement of pressure and temperature in HVAC, refrigeration, and air conditioning systems. Please read this manual thoroughly before use to ensure proper functionality and safety.

భద్రతా సమాచారం

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling refrigerants.
• Ensure all hose connections are secure and leak-free before applying pressure or vacuum to a system.
• Do not exceed the maximum working pressure of the hoses (500 PSI) or the gauge (800 PSI). Exceeding these limits can cause equipment damage or personal injury.
• Use the device in a well-ventilated area to prevent the accumulation of refrigerant vapors.
• Refer to local and national regulations for proper refrigerant handling, recovery, and disposal procedures.
• Keep the device away from moisture, direct sunlight, and extreme temperatures to prevent damage to electronic components.
• పరికరాన్ని విడదీయడానికి లేదా సవరించడానికి ప్రయత్నించవద్దు. అన్ని సర్వీసింగ్‌లను అర్హత కలిగిన సిబ్బందికి సూచించండి.

ఉత్పత్తి ముగిసిందిview మరియు భాగాలు

The Elitech DMG-2SE is a digital manifold gauge designed for HVAC/R professionals, offering accurate pressure and temperature measurements. It features a high-definition LCD screen, intuitive controls, and robust construction for reliable performance.

శీతలకరణి గొట్టాలు

The included refrigerant charging hoses are color-coded for easy identification and proper connection.

స్పెసిఫికేషన్లు

• ఒత్తిడి పరిధి: -14 నుండి 800 psi
• ఖచ్చితత్వం: ±1% FS (Full Scale)
• రిజల్యూషన్: 1 psi
• ఒత్తిడి యూనిట్లు: psi, kg/cm², kPa, MPa, bar, inHg
• ఉష్ణోగ్రత యూనిట్లు: ° C / ° F.
• అనుకూల శీతలీకరణలు: Supports 88 types (e.g., R11, R12, R22, R134a, R410a, R404a, R407c, R507, R32, R290, R600a, R1234yf, etc.). The device defaults to 18 types and can be updated via an app.
• గొట్టం పొడవు: 59 అంగుళాలు (1.5మీ)
• గొట్టం కనెక్షన్లు: 1/4" SAE
• Hose Working Pressure: 500 PSI (Yellow, Blue, Red)
• Hose Burst Pressure: 4000 PSI (Yellow, Blue, Red)
• శక్తి: 2 x AAA batteries (replaceable)
• బ్యాటరీ లైఫ్: సుమారు 200 గంటలు
• కొలతలు: Approximately 4.3 inches (11 cm) width, 5.3 inches (13.5 cm) height, 2.9 inches (7.4 cm) depth.
• బరువు: సుమారు 1.5 పౌండ్లు (680గ్రా)

సెటప్

1. బ్యాటరీ ఇన్‌స్టాలేషన్: Open the battery compartment located on the back of the unit. Insert two AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. ప్రారంభ పవర్ ఆన్: పవర్ బటన్ నొక్కండి (U symbol) to turn on the device. The LCD screen will illuminate.
3. యూనిట్ ఎంపిక: Use the "MODE" button to cycle through available measurement units (psi, kg/cm², kPa, MPa, bar, inHg for pressure; °C/°F for temperature). Select your preferred units by stopping on the desired option.
4. రిఫ్రిజెరాంట్ ఎంపిక: Press the "MODE" button repeatedly until the refrigerant type (e.g., R134a) flashes on the display. Use the up/down arrow buttons to scroll through the list of supported refrigerants. Confirm your selection by pressing "MODE" again or by waiting a few seconds for the selection to auto-confirm.
5. Zeroing the Pressure: Before connecting the gauge to any system, ensure it is at atmospheric pressure (not connected to any pressure source). Press the "ZERO" button to calibrate the pressure reading to zero. This ensures accurate measurements.

ఆపరేటింగ్ సూచనలు

గొట్టాలను కలుపుతోంది

1. కనెక్ట్ చేయండి నీలం గొట్టం to the low-pressure service port of the HVAC/R system.
2. కనెక్ట్ చేయండి ఎర్ర గొట్టం to the high-pressure service port of the HVAC/R system.
3. కనెక్ట్ చేయండి yellow hose to the service port of your vacuum pump, refrigerant tank, or recovery machine.
4. Ensure all connections are hand-tightened, then slightly snugged with a wrench to prevent refrigerant leaks.

ఒత్తిడి మరియు ఉష్ణోగ్రతను కొలవడం

1. With the hoses connected to the system, slowly open the appropriate valve knobs on the manifold gauge to allow system pressure to reach the internal sensors.
2. The LCD will display real-time pressure readings for both the high and low sides of the system.
3. Simultaneously, the display will show the corresponding saturation temperatures (evaporation and condensation temperatures) for the currently selected refrigerant.
4. The "PT" (Pressure-Temperature) mode shows pressure and saturation temperature. "Ev" (Evaporation) and "Co" (Condensation) indicate the saturation temperatures, while "PL" (Low Pressure) and "PH" (High Pressure) indicate the actual system pressures.

Refrigerant Charging/Recovery

The DMG-2SE provides accurate pressure readings essential for refrigerant charging and recovery processes. Always follow industry best practices and local regulations for these operations.

• ఛార్జింగ్ కోసం: Connect the yellow hose to the refrigerant tank. Purge any air from the yellow hose before opening the manifold valve to the system. Monitor the pressure readings on the DMG-2SE to ensure the correct charge is added.
• For Recovery: Connect the yellow hose to a certified refrigerant recovery machine. Follow the recovery unit's instructions and monitor system pressures on the DMG-2SE during the recovery process.

నిర్వహణ

• శుభ్రపరచడం: పరికరాన్ని మృదువైన, డితో తుడవండిamp గుడ్డ. రాపిడి క్లీనర్లు, ద్రావకాలను ఉపయోగించవద్దు లేదా యూనిట్‌ను నీటిలో ముంచవద్దు.
• బ్యాటరీ భర్తీ: Replace batteries when the low battery indicator appears on the display. Ensure the device is powered off before opening the battery compartment and replacing the two AAA batteries.
• గొట్టం తనిఖీ: Regularly inspect all refrigerant hoses for signs of wear, cracks, cuts, or damage. Replace damaged hoses immediately to prevent refrigerant leaks and ensure safety.
• నిల్వ: Store the manifold gauge set in a clean, dry place, away from direct sunlight, extreme temperatures, and corrosive environments.

ట్రబుల్షూటింగ్

వారంటీ మరియు మద్దతు

For detailed warranty information, technical support, or service inquiries regarding your Elitech Digital Manifold Gauge Set DMG-2SE, please contact Elitech customer service. Refer to the product packaging or the official Elitech webఅత్యంత తాజా సంప్రదింపు వివరాలు మరియు మద్దతు వనరుల కోసం సైట్.

ఎలిటెక్ Webసైట్: www.elitech.com