AVATTO Smart Fingerprint Door Lock Cylinder 60mm (30/30) User Manual

1. పరిచయం

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your AVATTO Smart Fingerprint Door Lock Cylinder (Model SDL-S1-B60). Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. భద్రతా సమాచారం

• ఇన్‌స్టాలేషన్‌కు ముందు అన్ని భాగాలు ఉన్నాయని మరియు పాడవకుండా ఉన్నాయని నిర్ధారించుకోండి.
• Do not attempt to disassemble or modify the lock cylinder, as this may void the warranty and compromise security.
• Use only the specified 1.5V alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe place outside the property.
• Protect the fingerprint sensor from sharp objects or excessive force.
• This lock is designed for indoor use. Avoid exposure to extreme weather conditions.

3. ప్యాకేజీ విషయాలు

కింది అన్ని అంశాలు మీ ప్యాకేజీలో చేర్చబడ్డాయని నిర్ధారించుకోండి:

• 1 x AVATTO Smart Door Lock Cylinder (60mm)
• 2 x మెకానికల్ కీలు
• 3 x RFID కార్డ్‌లు
• 1 x స్క్రూడ్రైవర్
• 1 x User Manual (German, refer to this document for English instructions)

4. సంస్థాపన

4.1 ప్రీ-ఇన్‌స్టాలేషన్ తనిఖీలు

Before proceeding with installation, ensure your door and existing lock cylinder are compatible:

• సిలిండర్ రకం: Confirm your existing cylinder type is compatible. This smart lock is designed to replace standard European profile సిలిండర్లు.
• Cylinder Hole Size: Measure the dimensions of your door's lock cylinder hole. The required dimensions are approximately 20mm diameter, 35mm height, and 10mm width.
• తలుపు మందం: This lock is suitable for doors with a thickness between 60mm and 85mm.

4.2 Cylinder Dimensions

The smart lock cylinder has the following dimensions:

4.3 సంస్థాపనా దశలు

1. Remove Existing Cylinder: Unscrew the retaining screw on the side of your door that holds the current lock cylinder in place. Insert your key and turn it slightly (about 15-20 degrees) to align the cam, then pull the cylinder out.
2. Adjust Inner Cylinder Length: The inner cylinder length is adjustable from 30mm to 55mm. Adjust it to match the inner side of your door. The outer cylinder length is fixed at 30mm.
3. Insert Smart Lock Cylinder: Insert the AVATTO Smart Lock Cylinder into the door's cylinder hole. Ensure it fits snugly and the outer fingerprint module is correctly oriented.
4. సిలిండర్‌ను భద్రపరచండి: Re-insert and tighten the retaining screw on the side of the door to secure the smart lock cylinder.
5. బ్యాటరీలను వ్యవస్థాపించండి: Open the battery compartment on the inner side of the lock. Insert 3 x 1.5V alkaline batteries (CR123A type recommended, not included). Ensure correct polarity.
6. పరీక్ష కార్యాచరణ: Before closing the door, test the mechanical key and the inner knob to ensure smooth operation.

Installation typically takes about 10 minutes using a hex screwdriver (provided).

5. సెటప్

5.1 Smart Life App Connection

1. అనువర్తనాన్ని డౌన్లోడ్ చేయండి: Download the "Smart Life" application from your smartphone's app store (iOS or Android).
2. నమోదు/లాగిన్: Create an account or log in to your existing Smart Life account.
3. పరికరాన్ని జోడించండి: In the app, tap '+' to add a new device. Select 'Security & Video Surveillance' > 'Smart Lock' or search for 'AVATTO Smart Lock'.
4. బ్లూటూత్ ద్వారా జత చేయండి: Ensure your phone's Bluetooth is enabled. The app will guide you through the pairing process. The lock uses Bluetooth protocol with an effective transmission range of 50 meters.
5. రిమోట్ కంట్రోల్ (ఐచ్ఛికం): For remote control functionality outside the Bluetooth range (e.g., from office or on the go), an AVATTO Bluetooth Gateway (sold separately) is required. Connect the gateway to your home Wi-Fi and link it to the lock via the Smart Life app.

5.2 Adding Users and Unlocking Methods

Through the Smart Life app, you can manage various unlocking methods:

• వేలిముద్ర నమోదు: Follow the in-app instructions to register fingerprints. You will typically need to place your finger on the sensor multiple times from different angles.
• RFID Card Registration: In the app, select to add an RFID card, then present the RFID card to the lock's sensor as instructed.
• వాడుకరి నిర్వహణ: Add new users, assign specific unlocking methods (fingerprint, RFID, app), and set administration permissions.

6. ఆపరేటింగ్ సూచనలు

6.1 అన్‌లాకింగ్

• వేలిముద్ర అన్‌లాక్: మీ నమోదిత వేలిని వేలిముద్ర సెన్సార్‌పై ఉంచండి. వేలిముద్ర గుర్తించబడితే లాక్ అన్‌లాక్ అవుతుంది.
• RFID కార్డ్ అన్‌లాక్: Present a registered RFID card to the lock's sensor. The lock will unlock upon recognition.
• Smart Life App Unlock: Open the Smart Life app, select your lock, and tap the unlock button. This works via Bluetooth or remotely if a gateway is connected.
• మెకానికల్ కీ అన్‌లాక్: Insert one of the provided mechanical keys into the keyhole and turn to unlock the door.

6.2 లాకింగ్

• ఆటోమేటిక్ లాకింగ్: The lock may be configured for automatic locking after a set period.
• మాన్యువల్ లాకింగ్: From the inside, turn the knob to lock the door. From the outside, the lock will automatically engage after closing, or you can manually lock it via the app.

7. నిర్వహణ

7.1 బ్యాటరీ నిర్వహణ

The lock requires 3 x 1.5V alkaline batteries. Batteries are not included.

• బ్యాటరీ స్థితి: You can check the battery level through the Smart Life app interface.
• తక్కువ బ్యాటరీ హెచ్చరిక: The lock will provide an indication (e.g., sound or light) when batteries are low. Replace them promptly.
• బ్యాటరీ భర్తీ: When replacing batteries, ensure the lock is in an unlocked state if possible. Open the battery compartment, remove old batteries, and insert new ones with correct polarity.

7.2 Emergency Unlock

In case of completely drained batteries, you can still access your property:

• మెకానికల్ కీ: Use one of the provided mechanical keys to unlock the door.
• బాహ్య శక్తి: The lock features a USB port for emergency power. Connect a portable power bank to the USB port to temporarily power the lock and unlock it using a registered fingerprint, RFID card, or the app.

8. ట్రబుల్షూటింగ్

• లాక్ స్పందించడం లేదు: Check battery level. Replace batteries if low. Ensure the lock is properly installed and not obstructed.
• వేలిముద్ర గుర్తించబడలేదు: Ensure your finger is clean and dry. Try re-registering your fingerprint in the app.
• RFID కార్డ్ పనిచేయడం లేదు: Ensure the card is registered. Try re-registering the card.
• యాప్ కనెక్షన్ సమస్యలు: Ensure Bluetooth is enabled on your phone. If using remote control, check the AVATTO Bluetooth Gateway's connection to Wi-Fi and the lock. Restart the app or your phone.
• Motor sounds but latch doesn't move: This could indicate an obstruction or incorrect installation. Recheck the cylinder's alignment and ensure no parts are binding.
• Lock is unresponsive after battery change: Ensure batteries are inserted with correct polarity. If issues persist, contact support.

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the documentation provided with your purchase or contact AVATTO customer service through their official website or the retailer where the product was purchased. Please have your model number (SDL-S1-B60) and purchase details ready when contacting support.