ANYCUBIC Photon Mono M7 PRO and Purifier 2.0 User Manual

1. పరిచయం

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your ANYCUBIC Photon Mono M7 PRO resin 3D printer and the accompanying Purifier 2.0. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. భద్రతా సమాచారం

Resin 3D printing involves materials and processes that require careful handling. Always adhere to the following safety guidelines:

• రెసిన్‌ను నిర్వహించేటప్పుడు చేతి తొడుగులు మరియు భద్రతా గ్లాసులతో సహా తగిన వ్యక్తిగత రక్షణ పరికరాలు (PPE) ధరించండి.
• Operate the printer in a well-ventilated area. The Purifier 2.0 assists with ventilation, but additional airflow is recommended.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place.
• Avoid skin contact with uncured resin. In case of contact, wash thoroughly with soap and water.
• Do not dispose of liquid resin down drains. Cure residual resin under UV light before disposing of it as solid waste.
• ప్రింటర్ మరియు రెసిన్‌ను పిల్లలు మరియు పెంపుడు జంతువులకు దూరంగా ఉంచండి.
• విద్యుత్ సరఫరా సరిగ్గా కనెక్ట్ చేయబడిందని మరియు గ్రౌండింగ్ చేయబడిందని నిర్ధారించుకోండి.

3. ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి:

• ANYCUBIC Photon Mono M7 PRO 3D Printer
• ANYCUBIC Purifier 2.0
• పవర్ అడాప్టర్ మరియు కేబుల్
• రెసిన్ వ్యాట్
• ప్లేట్ నిర్మించండి
• USB డ్రైవ్
• Tool Kit (e.g., scraper, Allen wrenches)
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

Image: The ANYCUBIC Photon Mono M7 PRO 3D printer shown alongside the Purifier 2.0 ventilation unit.

4. సెటప్

4.1 అన్‌ప్యాకింగ్ మరియు ప్లేస్‌మెంట్

1. ప్యాకేజింగ్ నుండి అన్ని భాగాలను జాగ్రత్తగా తొలగించండి.
2. ప్రింటర్‌ను ప్రత్యక్ష సూర్యకాంతికి దూరంగా, బాగా వెంటిలేషన్ ఉన్న ప్రదేశంలో స్థిరమైన, సమతల ఉపరితలంపై ఉంచండి.
3. Remove any protective films or packaging materials from the printer.

4.2 Purifier 2.0 Connection

The Purifier 2.0 is designed to reduce odors and VOCs during printing. Connect it as follows:

1. Identify the ventilation port on your Photon Mono M7 PRO.
2. Connect the Purifier 2.0's flexible hose to the printer's ventilation port.
3. Extend the exhaust hose from the Purifier 2.0 to an external environment, such as a window, to vent gases effectively.

Image: The ANYCUBIC Purifier 2.0 unit, showing its main body and attached flexible hoses for ventilation.

Image: The ANYCUBIC Photon Mono M7 PRO printer with the Purifier 2.0 connected and its exhaust hose directed out of a window, illustrating proper ventilation setup.

Image: A diagram illustrating the compatibility and installation methods of the Purifier 2.0 with different ANYCUBIC printer series, including direct connection for M7 series and adapter requirements for others.

4.3 Initial Power-On and Leveling

1. పవర్ అడాప్టర్‌ను ప్రింటర్‌కు కనెక్ట్ చేయండి మరియు దానిని పవర్ అవుట్‌లెట్‌లోకి ప్లగ్ చేయండి.
2. పవర్ స్విచ్ ఉపయోగించి ప్రింటర్‌ను ఆన్ చేయండి.
3. Follow the on-screen instructions for initial setup, including build plate leveling. Refer to the quick start guide for detailed leveling procedures.

5. ఆపరేటింగ్ సూచనలు

5.1 Preparing Your Model for Printing

1. Install a compatible slicing software (e.g., Anycubic Photon Workshop) on your computer.
2. Import your 3D model (STL, OBJ format) into the slicing software.
3. Adjust print settings such as layer height, exposure time, and support structures. The Photon Mono M7 PRO supports high-speed printing up to 170mm/h with high-speed resin and 130mm/h with standard resin.
4. Slice the model and save the generated file USB డ్రైవ్‌కి.

Image: A visual comparison demonstrating the ANYCUBIC Photon Mono M7 PRO's printing speed of up to 170mm/h, significantly faster than other printers shown at 150mm/h.

5.2 ముద్రణను ప్రారంభించడం

1. Ensure the resin vat is clean and securely installed.
2. Pour resin into the vat, ensuring it is below the maximum fill line.
3. Insert the USB drive with your sliced model into the printer's USB port.
4. On the printer's touchscreen, select your model file and initiate the print.
5. The Purifier 2.0 will activate automatically or can be manually started to manage fumes.

5.3 అధునాతన ఫీచర్లు

• 14K High-Precision LCD: The 14K monochrome LCD screen (13312*5120 resolution, 16.8 × 24.8 µm XY resolution) allows for printing intricate details, including holes as small as 0.3 mm in diameter.
• COB LighTurbo 3.0: This advanced light source system, combined with Fresnel lenses and front-facing reflectors, achieves a light angle within 3° and light uniformity exceeding 90%. It includes a light-off compensation algorithm to enhance printing success rates.
• Circulation Heating: The printer features a circulation heating system designed to maintain an optimal printing temperature, which is crucial for consistent resin performance and print quality.

Image: A side-by-side comparison of a highly detailed 3D print achieved with the M7 Pro LightTurbo 3.0 Light Source versus a print with general precision from another COB light source, highlighting the superior resolution.

Image: A table comparing key specifications of the Photon Mono M7 Pro (LightTurbo 3.0, 0.15mm minimum forming diameter, ≤3° minimum precision light angle, ≥90% light uniformity, Dynamic Light-off Compensation) against other printers.

Image: A diagram illustrating the internal circulation heating system of the Anycubic Photon Mono M7 Pro, designed to maintain optimal printing temperature, contrasted with a standard resin printer without this feature.

6. నిర్వహణ

6.1 ప్రింటర్‌ను శుభ్రపరచడం

• After each print, carefully remove the build plate and clean off any residual resin.
• Use isopropyl alcohol (IPA) and a soft cloth to clean the build plate and printer surfaces.
• Inspect the FEP film in the resin vat for damage or cured resin particles. Replace the FEP film if necessary.
• Never use sharp objects to scrape the FEP film or LCD screen.

6.2 రెసిన్ నిర్వహణ మరియు నిల్వ

• Filter unused resin from the vat back into its original bottle using a mesh filter.
• Store resin bottles in a cool, dark, and dry place, away from direct sunlight.
• Ensure resin bottles are tightly sealed to prevent contamination and premature curing.

6.3 Purifier 2.0 Maintenance

• Regularly check the filter in the Purifier 2.0 and replace it as recommended by the manufacturer to maintain optimal performance.
• Keep the hoses clear of obstructions.

7. ట్రబుల్షూటింగ్

This section addresses common issues you might encounter. For more complex problems, please contact customer support.

7.1 Print Failures

• Model not sticking to build plate: Re-level the build plate, increase bottom exposure time, or ensure the room temperature is adequate.
• Partial prints or layers missing: Check for insufficient supports, incorrect exposure settings, or resin contamination.
• Deformed prints: Verify print orientation, support placement, and ensure the FEP film is not damaged.

7.2 ప్రింటర్ స్పందించడం లేదు

• Ensure the power cable is securely connected and the power switch is on.
• ప్రింటర్‌ను పునartప్రారంభించండి.
• Check the USB drive for corruption or incompatible file ఫార్మాట్‌లు.

7.3 Purifier Not Working

• Verify the power connection to the Purifier 2.0.
• Check if the filter is clogged and needs replacement.
• Ensure hoses are not kinked or blocked.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

ANYCUBIC products come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ANYCUBIC website. For technical support, troubleshooting assistance, or spare parts, please contact ANYCUBIC customer service through their official channels.