1. పరిచయం
Thank you for choosing the hygger Mini Aquarium Heater 30W. This digital, adjustable temperature heater is designed to maintain a stable and optimal water temperature for small aquariums, including Betta and turtle tanks, ranging from 11 to 30 liters (3-8 gallons). Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.
This heater features advanced safety mechanisms, including explosion-proof components, overheat protection, and low water level detection, providing a reliable heating solution for your aquatic environment.
2. భద్రతా సమాచారం
- Always ensure the heater is పూర్తిగా మునిగిపోయింది in water during operation. Operating the heater out of water will cause it to overheat and trigger the "Er" error code, leading to automatic shutdown.
- Before performing any maintenance, water changes, or cleaning of the aquarium, unplug the heater from the power outlet. Allow the heater to cool down for at least 15 minutes before removing it from the water.
- పవర్ కార్డ్ లేదా ప్లగ్ దెబ్బతిన్నట్లయితే హీటర్ను ఆపరేట్ చేయవద్దు.
- ఈ ఉపకరణం వారి భద్రతకు బాధ్యత వహించే వ్యక్తి ద్వారా ఉపకరణాన్ని ఉపయోగించడం గురించి పర్యవేక్షణ లేదా సూచనలను అందిస్తే తప్ప, శారీరక, ఇంద్రియ లేదా మానసిక సామర్థ్యాలు తగ్గిన వ్యక్తులు (పిల్లలతో సహా) లేదా అనుభవం మరియు జ్ఞానం లేకపోవడం కోసం ఉద్దేశించబడలేదు.
- హీటర్ ఇండోర్ ఉపయోగం కోసం మాత్రమే రూపొందించబడింది.
- Ensure the power outlet is equipped with a Ground Fault Circuit Interrupter (GFCI) for added safety.
- The heater's internal components include insulated explosion-proof quartz heating tubes and an ABS outer casing designed not to melt at high temperatures, enhancing safety and durability.
- In case of an error (e.g., "EE" for overheat, "EU" for low temperature, "Er" for out of water), the system will emit a buzzing sound and automatically shut off. Address the issue immediately. While the system cuts power, residual heat may still be present.
3. ప్యాకేజీ విషయాలు
దయచేసి ఈ క్రింది అంశాల కోసం ప్యాకేజీని తనిఖీ చేయండి:
- 1 x hygger Mini Aquarium Heater (30W)
- 1 x External Digital Temperature Controller
- 2 x Suction Cups for mounting
చిత్రం 1: The hygger Mini Aquarium Heater with its external digital temperature controller and two suction cups.
4. ఉత్పత్తి లక్షణాలు
- Safety and Explosion Protection: Features nickel-chrome heating wires for rapid heating and extended lifespan. Insulated explosion-proof quartz heating tubes internally and an ABS anti-scald shell externally ensure safety and durability.
- Smart External Control: Digital external controller with real-time indicators for heating (red), energy-saving (blue), and error status.
- ఉష్ణోగ్రత ప్రదర్శన: Shows the set temperature during adjustment, then automatically displays the current water temperature.
- మెమరీ ఫంక్షన్: Retains the last set temperature even after a power outage.
- లోపం సూచికలు: Provides visual and audible alerts for over-temperature ("EE"), low-temperature ("EU"), and out-of-water ("Er") conditions.
- కాంపాక్ట్ డిజైన్: Ideal for small to medium-sized aquariums (11-30L / 3-8 gallons), fitting discreetly in corners or hidden areas.
చిత్రం 2: Visual representation of the heater's key features, including beep alarm, out of water protection, anti-scald shell, overheat protection, and thickened quartz glass.
5. సెటప్ సూచనలు
- ప్లేస్మెంట్: Position the heater vertically or horizontally inside the aquarium. Ensure it is fully submerged in water. Use the provided suction cups to secure the heater firmly to the aquarium glass.
- నీటి ప్రసరణ: For optimal performance and even heat distribution, it is recommended to install a water pump or filter to maintain good water circulation around the heater. This prevents localized overheating.
- కంట్రోలర్ ప్లేస్మెంట్: Place the external digital temperature controller in a dry location, easily accessible for temperature adjustments. Ensure it is not exposed to water splashes.
- పవర్ కనెక్షన్: Once the heater is securely placed and fully submerged, plug the power cord into a suitable electrical outlet.
చిత్రం 3: The hygger Mini Aquarium Heater and its controller installed in an aquarium, demonstrating full submersion.
చిత్రం 4: Diagram illustrating correct (fully submerged, vertical or horizontal) and incorrect (partially submerged) installation methods for the heater.
6. ఆపరేటింగ్ సూచనలు
6.1 ఉష్ణోగ్రత సెట్ చేయడం
- After plugging in the heater, the digital display on the external controller will show the current water temperature.
- Press the "SET" button on the controller. The display will flash, showing the currently set temperature.
- Continue pressing the "SET" button to cycle through the desired temperature range (15°C - 34°C). Each press will increase the set temperature by 1°C.
- Once your desired temperature is displayed, stop pressing the "SET" button. The display will flash a few times and then return to showing the current water temperature, indicating that the new setting has been saved.
- The heater will automatically begin heating if the current water temperature is below the set temperature. A red indicator light on the controller signifies active heating. A blue indicator light signifies that heating has stopped (temperature reached or exceeded set point).
చిత్రం 5: వివరంగా view of the external temperature controller, showing the digital display, SET button, and temperature control range (15°C-34°C).
6.2 Error Indicators and Protection
- Over Temperature Protection ("EE"): If the water temperature reaches or exceeds 36°C (96.8°F), the LED display will show "EE", and the heater will emit a buzzing sound before automatically switching off. This protects your aquatic life from excessive heat.
- Low Temperature Protection ("EU"): If the water temperature drops below 12°C (53.6°F), the LED display will show "EU", and the heater will emit a buzzing sound before switching off. This indicates a potential issue with heating or an extremely cold environment.
- Out of Water Protection ("Er"): If the heater is not fully submerged or leaves the water, it will automatically power off and flash an "Er" error code, accompanied by a buzzing sound. The heater will resume normal operation once fully submerged again.
చిత్రం 6: Illustration of the "EE" error code for over-temperature protection, showing the display and heater status.
చిత్రం 7: Illustration of the "EU" error code for low-temperature protection, showing the display and heater status.
చిత్రం 8: Illustration of the "Er" error code for out-of-water protection, showing the heater partially exposed and the error display.
7. నిర్వహణ
- శుభ్రపరచడం: Regularly inspect the heater for algae or mineral buildup. To clean, unplug the heater and allow it to cool completely (at least 15 minutes) before removing it from the water. Gently wipe the heater surface with a soft cloth or sponge. Do not use abrasive cleaners or harsh chemicals.
- నీటి మార్పులు: Always unplug the heater and allow it to cool before performing water changes in your aquarium. This prevents thermal shock to the heater and potential injury.
- తనిఖీ: Periodically check the power cord and the heater body for any signs of damage, cracks, or wear. If any damage is observed, discontinue use immediately and replace the unit.
8. ట్రబుల్షూటింగ్
| సమస్య | Error Code / Indication | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|---|
| Heater not heating / Display off | None / Display blank | No power, loose connection, power outage. | Check power plug and outlet. Ensure power is supplied. |
| నీరు చాలా వేడిగా ఉంటుంది | "EE" (Over Temperature) | Water temperature ≥ 36°C. Heater malfunction or external heat source. | Unplug immediately. Allow water to cool. Check for external heat sources. If "EE" persists after cooling, the heater may be faulty. |
| నీరు చాలా చల్లగా ఉంటుంది | "EU" (Low Temperature) | Water temperature < 12°C. Heater malfunction or insufficient power for tank size. | Check if heater is plugged in and set correctly. Ensure tank size is within recommended range (11-30L). If "EU" persists, heater may be faulty. |
| Heater stops working / Flashing "Er" | "Er" (Out of Water) | Heater is not fully submerged in water. | Ensure the heater is completely submerged. Check water level in the aquarium. The heater will resume once fully submerged. |
| అస్థిరమైన ఉష్ణోగ్రత | ఏదీ లేదు | Poor water circulation, heater placed in a dead spot. | Ensure adequate water circulation around the heater (e.g., with a filter or pump). Reposition the heater if necessary. |
9. స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| బ్రాండ్ | హైగర్ |
| మోడల్ సంఖ్య | HG206-EU |
| శక్తి | 30W |
| సిఫార్సు చేయబడిన ట్యాంక్ పరిమాణం | 11-30 Liters (3-8 Gallons) |
| ఉష్ణోగ్రత నియంత్రణ పరిధి | 15°C - 34°C (59°F - 93.2°F) |
| ఉష్ణోగ్రత ఖచ్చితత్వం | ±1°C |
| Heating Rod Dimensions | 34 x 26.3 x 125 మిమీ (1.34 x 1.04 x 4.9 అంగుళాలు) |
| కేబుల్ పొడవు | 0.8m + 1.2m (2.6ft + 3.9ft) |
| రంగు | నలుపు |
| ప్యాకేజీ కొలతలు | 16.4 x 13.1 x 4.7 సెం.మీ |
| ప్యాకేజీ బరువు | 320 గ్రాములు |
చిత్రం 9: Diagram summarizing key specifications such as power, cable length, control range, application, temperature accuracy, and heating rod dimensions.
10. వారంటీ మరియు మద్దతు
Specific warranty information for the hygger Mini Aquarium Heater 30W is not provided in this manual. Please refer to the product packaging or contact hygger customer support directly for details regarding warranty coverage and technical assistance.
For further support or inquiries, please visit the official hygger webసైట్ లేదా వారి కస్టమర్ సేవా విభాగాన్ని సంప్రదించండి.
