isinwheel ఎలక్ట్రిక్ బైక్ కంట్రోలర్ M10 యూజర్ మాన్యువల్

1. పరిచయం

This manual provides essential instructions for the proper installation, operation, and maintenance of your isinwheel Electric Bike Controller, designed for the M10 electric bike model. Please read this manual thoroughly before installation and use to ensure safe and efficient performance of your electric bicycle.

2. భద్రతా సమాచారం

• Always disconnect the battery before performing any installation, maintenance, or repair work on the controller or electric bike system.
• షార్ట్ సర్క్యూట్‌లను నివారించడానికి అన్ని కనెక్షన్‌లు సురక్షితంగా మరియు సరిగ్గా ఇన్సులేట్ చేయబడ్డాయని నిర్ధారించుకోండి.
• Avoid exposing the controller to water, extreme temperatures, or direct sunlight for prolonged periods.
• If you are unsure about any installation steps, consult a qualified electric bike technician.
• Do not attempt to open or modify the controller casing, as this will void the warranty and may cause damage or injury.

3. ప్యాకేజీ విషయాలు

• 1 x isinwheel Electric Bike Controller (Model GLX-M0003US-)

4. స్పెసిఫికేషన్లు

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

The isinwheel Electric Bike Controller is designed for integration into the M10 electric bike system. Proper installation is crucial for functionality and safety. It is highly recommended that installation be performed by an experienced technician.

5.1 General Connection Overview

The controller manages power distribution from the battery to the motor and other components. It typically connects to:

• బ్యాటరీ: Main power input. Ensure correct polarity.
• మోటార్: Output for motor power and phase signals.
• Display/Control Panel: For user interface, speed settings, and system monitoring.
• థొరెటల్: Input for speed control.
• Pedal Assist Sensor (PAS): Input for pedal assistance.
• బ్రేక్ లివర్స్: Input for motor cut-off during braking.

Refer to the wiring diagram provided with your M10 electric bike for specific connection points and wire colors. Ensure all connectors are fully seated and secured.

మూర్తి 1: The isinwheel Electric Bike Controller, showing its aluminum casing with specifications printed on it and various colored wire connectors extending from one end. The specifications visible include 'Brushless Motor Controller', 'Battery Voltage: 36V', 'Cutoff Voltage: 29V', 'Current Limit: 15A', 'Mode: GLX-M0003US-', and 'Number: 240122'. A yellow XT60-style connector is also visible among the wires.

5.2 కంట్రోలర్‌ను మౌంట్ చేయడం

Mount the controller in a secure, dry location on the bicycle frame, away from direct impact zones and excessive vibration. Ensure adequate airflow around the controller for heat dissipation. Use appropriate fasteners to secure it firmly.

6. ఆపరేటింగ్ సూచనలు

Once the controller is correctly installed and all connections are verified, the electric bike system can be operated via the bike's display or control panel.

• పవర్ ఆన్/ఆఫ్: Use the power button on your electric bike's display unit to turn the system on or off. The controller will activate upon power-on.
• వేగ నియంత్రణ: Adjust the speed or power assist level using the controls on your display unit or by engaging the throttle (if installed).
• పెడల్ అసిస్ట్: The controller will engage motor assistance based on your pedaling input from the PAS sensor.
• బ్రేకింగ్: The controller will cut off motor power when the brake levers are engaged, ensuring safe stopping.

Always operate your electric bike responsibly and in accordance with local regulations.

7. నిర్వహణ

Regular maintenance helps ensure the longevity and reliable performance of your controller.

• శుభ్రపరచడం: Keep the controller clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• కనెక్షన్ తనిఖీలు: Periodically inspect all wire connections to ensure they are secure and free from corrosion or damage.
• పర్యావరణ పరిరక్షణ: Avoid storing or operating the electric bike in conditions of extreme humidity or temperature fluctuations.
• నష్టం పరిశీలన: Regularly check the controller casing for any signs of physical damage.

8. ట్రబుల్షూటింగ్

If you encounter issues with your electric bike's electrical system, consider the following basic troubleshooting steps:

• శక్తి లేదు:
  • బ్యాటరీ ఛార్జ్ చేయబడి, సరిగ్గా కనెక్ట్ చేయబడిందో లేదో తనిఖీ చేయండి.
  • Verify that the main power switch on the battery or display is turned on.
  • Inspect all power cables for visible damage or loose connections.
• మోటారు స్పందించడం లేదు:
  • Ensure the throttle or pedal assist sensor is correctly connected and functioning.
  • Check motor phase wires and Hall sensor wires for secure connections.
  • Verify that the brake levers are not stuck in the engaged position, which would cut motor power.
• అస్తవ్యస్త ప్రవర్తన:
  • Inspect all wiring for signs of fraying, pinching, or water ingress.
  • Ensure the controller is securely mounted and not vibrating excessively.

If these steps do not resolve the issue, please contact isinwheel customer support or a certified electric bike repair center.

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official isinwheel webసైట్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.

10. తయారీదారు సమాచారం

తయారీదారు: షెన్‌జెన్ జిన్‌చెంగ్ టైమ్స్ టెక్నాలజీ కో., లిమిటెడ్

Controller Manufacturer (as per label): GALAXY BICYCLE CO.,LTD