1. పరిచయం
The iGPSPORT HR50 is a versatile heart rate monitor designed for various fitness activities including cycling, running, jogging, yoga, and general fitness. It features Bluetooth and ANT+ connectivity, IPX7 waterproofing, and a comfortable, adjustable chest strap. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. ప్యాకేజీ విషయాలు
The iGPSPORT HR50 package includes the following items:
- 1 x HR50 Heart Rate Sensor
- 1 x సర్దుబాటు చేయగల ఛాతీ పట్టీ
- 1 x CR2032 బటన్ బ్యాటరీ
- 1 x వినియోగదారు మాన్యువల్

Image: The iGPSPORT HR50 heart rate monitor sensor and its accompanying adjustable chest strap, as typically found in the product package.
3. సెటప్
3.1 బ్యాటరీ ఇన్స్టాలేషన్
The HR50 uses a CR2032 button battery. Follow these steps to install or replace the battery:
- Slide the battery cover to unlock it, then open it.
- Remove the battery insulation strip (if present).
- Insert the CR2032 battery with the positive side facing up. Confirm that the front indicator light flashes to ensure the battery is installed correctly.
- Close the battery compartment and rotate it to lock.
Video: A demonstration of how to install the CR2032 battery into a heart rate monitor sensor. This video is for a similar product (CYCPLUS H2Pro), but the battery installation process is generally the same.
3.2 Attaching the Sensor to the Chest Strap
Attach the HR50 sensor to the chest strap using the two snap buttons. Ensure it is securely fastened.

Image: The iGPSPORT HR50 sensor securely fastened to the black elastic chest strap via two snap buttons.
4. ఆపరేటింగ్ సూచనలు
4.1 ఛాతీ పట్టీ ధరించడం
- Wet the two electrode areas on the back of the chest strap with water before wearing. This improves conductivity for accurate heart rate detection.
- Install the HR50 sensor onto the chest strap with the iGPSPORT logo facing up.
- Adjust the strap to fit your chest comfortably and snugly, ensuring the monitor rests just below the center of your chest. The strap should be tight enough to stay in place but not restrict breathing.
- పట్టీని సురక్షితంగా కట్టుకోండి.

Image: A composite image illustrating the steps for wearing the iGPSPORT HR50 chest strap, including wetting electrodes, attaching the sensor, and adjusting the strap for a proper fit.
4.2 Connecting to Devices (Bluetooth & ANT+)
The iGPSPORT HR50 supports both Bluetooth and ANT+ protocols, allowing connection to a wide range of devices and fitness apps.
Connecting to a GPS Bike Computer (ANT+)
- Power on your GPS bike computer and enter the Settings page.
- Find the "Sensor Connections" option.
- Select "Add Heart Rate Device" or similar.
- కోసం వెతకండి and add the HR50 heart rate monitor.
- After successful pairing, the bike computer will display "Heart Rate Connected" or similar confirmation.
- Return to the cycling page, and your heart rate data will be displayed.
Video: A tutorial demonstrating how to pair a heart rate monitor with a Garmin Edge GPS bike computer via ANT+. This video is for a similar product (CYCPLUS H2Pro), but the pairing process is generally the same.
Connecting to a Fitness App (Bluetooth)
- మీ స్మార్ట్ఫోన్లో బ్లూటూత్ ప్రారంభించబడిందని నిర్ధారించుకోండి.
- Open your preferred fitness app (e.g., Strava, Wahoo, Zwift, Nike Run Club).
- Navigate to the "Devices" or "Sensors" section within the app.
- Select "Add New Sensor" or "Pair Device" and choose the HR50 from the list of available devices.
- Confirm the connection. Your heart rate data will now be streamed to the app.
Video: A demonstration of connecting a heart rate monitor to a smartphone fitness app (XOSS is shown as an example) via Bluetooth. This video is for a similar product (CYCPLUS H2Pro), but the pairing process is generally the same.
4.3 సూచిక లైట్లు
The HR50 features an indicator light to communicate its status:
- ఎరుపు కాంతి వెలుగులు: Power on, but no heart rate reading.
- గ్రీన్ లైట్ మెరుస్తుంది: Heart rate reading detected. (The green light flashes 6 times and then automatically turns off while the monitor remains working.)

Image: A section of a composite image illustrating the meaning of the HR50's indicator lights: red for no heart rate detected and green for active heart rate detection.
5. నిర్వహణ
5.1 Cleaning the Sensor (Host)
After each use, remove the sensor from the chest strap and wipe it with a soft, dry towel. Do not use alcohol or any abrasive materials (such as steel wool or chemical cleaners) on the sensor.

Image: A close-up of the iGPSPORT HR50 sensor with text overlay instructing to wipe it with a soft towel after use and to avoid alcohol or abrasive materials.
5.2 Cleaning the Chest Strap
Rinse the chest strap with clean water (around 25°C) after each use. Wipe it with a soft towel and hang or lay it flat to air dry naturally. Do not soak, dry clean, iron, or bleach the chest strap. Avoid stretching the chest strap violently or bending the electrode areas.

Image: A close-up of the iGPSPORT HR50 chest strap with text overlay instructing to rinse it with clean water, wipe, and air dry, while avoiding harsh cleaning methods.
Video: A demonstration of the cleaning process for a heart rate monitor. It shows wiping the sensor and rinsing the chest strap with water, then wiping it dry. This video is for a similar product (CYCPLUS H2Pro).
5.3 నిల్వ
For extended storage, remove the heart rate sensor from the strap to maximize battery life. Store in a cool, dry place.
6. ట్రబుల్షూటింగ్
6.1 సరికాని రీడింగ్లు
- Ensure electrodes are wet: The electrode pads on the strap must be moistened to ensure proper skin contact and conductivity.
- Check strap fit: The strap should be snug against your skin, but not uncomfortably tight. Adjust for optimal contact.
- Excessive moisture: While the device is waterproof, excessive sweat or water between the sensor and skin can sometimes interfere with readings. Ensure proper contact.
- బ్యాటరీ స్థాయి: A low battery can affect performance. Check the indicator light or replace the CR2032 battery if needed.
6.2 కనెక్షన్ సమస్యలు
- పరికరాలను పునఃప్రారంభించండి: Try restarting both the HR50 sensor (by removing and reinserting the battery) and your connecting device (smartphone/bike computer).
- Check Bluetooth/ANT+ settings: Ensure Bluetooth or ANT+ is enabled on your receiving device and that the HR50 is within range.
- Forget and re-pair: If issues persist, try "forgetting" the device in your app/computer settings and then re-pairing it.
- యాప్ అనుకూలత: Ensure your fitness app is compatible with external heart rate monitors and supports Bluetooth/ANT+ protocols.
7. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| కొలతలు | 59.8 x 35.3 x 11.9 మిమీ |
| హృదయ స్పందన రేటు | 40-240 BPM |
| పని ఉష్ణోగ్రత | -10°C నుండి 50°C |
| జలనిరోధిత రేటింగ్ | IPX7 |
| బ్యాటరీ రకం | CR2032 బటన్ బ్యాటరీ |
| బ్యాటరీ లైఫ్ | సుమారు 1200 గంటలు |
| పట్టీ పొడవు | 65-95 cm (adjustable) |
| బరువు | 47గ్రా |
| కనెక్టివిటీ | బ్లూటూత్, ANT+ |
| మెటీరియల్ | పాలిస్టర్ |

Image: A close-up image of the iGPSPORT HR50 sensor, highlighting its compact dimensions.
8. వారంటీ సమాచారం
The iGPSPORT HR50 comes with a 1-year warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official iGPSPORT webసైట్ లేదా కస్టమర్ సపోర్ట్ని సంప్రదించండి.
9. మద్దతు
For further assistance, product updates, or to explore other iGPSPORT products, please visit the official iGPSPORT webసైట్: అమెజాన్లో iGPSPORT స్టోర్.
You can also refer to the Quick Start Manual included in your package for additional information.





