XBrand 3-Tier Water Fountain (Model HD400) Instruction Manual

1. పరిచయం

Thank you for choosing the XBrand 3-Tier Water Fountain, Model HD400. This elegant freestanding water feature is designed to enhance your outdoor living space with the soothing sounds of flowing water. Constructed from durable fiber resin, this 51-inch tall fountain features a classic design with a pineapple top and an integrated auto shut-off pump for convenience and safety. This manual provides essential information for the proper setup, operation, and care of your new fountain.

Figure 1: The XBrand 3-Tier Water Fountain in brown, showcasing its design and water flow.

2. భద్రతా సమాచారం

Please read and understand all safety instructions before installing and operating your fountain. Failure to follow these instructions may result in electric shock, injury, or property damage.

• విద్యుత్ భద్రత: Ensure the fountain is connected to a properly grounded outlet. Do not modify the plug or use an adapter. Keep the electrical cord and connections dry. Disconnect power before performing any maintenance or cleaning.
• నీటి భద్రత: Use clean, fresh water. Do not allow children or pets to play with or drink from the fountain.
• ప్లేస్‌మెంట్: Place the fountain on a stable, level surface to prevent tipping and ensure proper water flow. Avoid placing it near electrical outlets or other sensitive equipment where splashing could cause damage.
• నిర్వహణ: The fountain is made of fiber resin. Handle with care during assembly and relocation to prevent damage.
• ఆపరేషన్: Never operate the pump without sufficient water, as this can damage the pump. The auto shut-off feature is a safety measure, but regular water level checks are recommended.

3. ప్యాకేజీ విషయాలు

Carefully unpack all components and inspect them for any damage. If any parts are missing or damaged, please contact XBrand customer support.

• Fountain Body (Base, Middle Tier, Top Tier with Pineapple Finial)
• Water Pump with Auto Shut-Off Sensor
• గొట్టం
• Electrical Cord with Adapter

మూర్తి 2: పేలింది view diagram showing the fountain's main components: hose, auto-shut-off pump, water tank, and electrical cord with adapter.

4. అసెంబ్లీ మరియు సెటప్

Follow these steps to assemble and set up your XBrand 3-Tier Water Fountain:

1. స్థానాన్ని ఎంచుకోండి: Select a level, stable outdoor location for your fountain, ensuring it is within reach of a grounded electrical outlet.
2. Assemble Tiers: Carefully stack the fountain tiers, starting with the largest base, then the middle tier, and finally the top tier with the pineapple finial. Ensure they are securely seated.
3. పంప్ కనెక్ట్ చేయండి: Attach the provided hose to the outlet of the water pump.
4. స్థాన పంపు: Place the pump inside the water tank located in the lowest basin of the fountain. Route the electrical cord out of the fountain through the designated opening, ensuring it does not interfere with water flow or stability.
5. నీటితో నింపండి: Fill the lowest basin of the fountain with clean, distilled water until the pump is fully submerged. Do not overfill.
6. పవర్ కనెక్ట్ చేయండి: Plug the electrical cord into a grounded outdoor outlet. The pump will begin circulating water, and the fountain will start flowing.

Figure 3: The auto shut-off pump and easy-to-connect electrical plug for simple setup.

5. ఆపరేటింగ్ సూచనలు

Once assembled and filled with water, operating your fountain is straightforward:

• Starting the Fountain: Plug the electrical cord into a grounded outlet. The pump will activate, and water will begin to flow through the tiers.
• నీటి మట్టం: Regularly check the water level in the lowest basin. Due to evaporation and splashing, water levels will decrease over time. Refill as needed to ensure the pump remains fully submerged.
• ఆటో షట్-ఆఫ్ ఫీచర్: The integrated pump includes an auto shut-off sensor. If the water level drops too low, the pump will automatically turn off to prevent damage. If this occurs, unplug the fountain, refill with water, and then plug it back in to resume operation.
• ప్రవాహాన్ని సర్దుబాటు చేయడం: Some pumps may have an adjustable flow rate switch. If present, adjust to your desired water flow.

మూర్తి 4: క్లోజ్-అప్ view of the pineapple top tier of the XBrand water fountain, with water gently cascading.

6. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ ఫౌంటెన్ యొక్క దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారిస్తుంది.

• రోజువారీ/వారం: నీటి మట్టాన్ని తనిఖీ చేసి, అవసరమైతే తిరిగి నింపండి.
• నెలవారీ: Disconnect power. Drain old water and clean the fountain basins with warm water and a soft cloth to remove any algae, dirt, or mineral deposits. Avoid harsh chemicals. Refill with clean water.
• పంప్ క్లీనింగ్: Periodically clean the pump impeller and intake screen to prevent blockages and maintain efficient water flow. Refer to the pump's specific instructions for detailed cleaning.
• శీతాకాలం: In areas with freezing temperatures, drain all water from the fountain and pump. Clean the fountain thoroughly and store it indoors in a dry, protected area to prevent damage from ice expansion.

మూర్తి 5: వివరంగా view of water flowing into one of the basins of the XBrand 3-Tier Water Fountain.

7. ట్రబుల్షూటింగ్

If you encounter issues with your fountain, refer to the following common problems and solutions:

8. స్పెసిఫికేషన్లు

• మోడల్: HD400
• బ్రాండ్: ఎక్స్‌బ్రాండ్
• మెటీరియల్: Fiber Resin
• రంగు: గోధుమ రంగు
• ఉత్పత్తి కొలతలు: 22.8"లీ x 22.8"వా x 51"హ
• వస్తువు బరువు: 32 పౌండ్లు
• శక్తి మూలం: ఎలక్ట్రిక్ (తీగ)
• పంప్ ఫ్లో రేట్: 450 లీ/గం (99 GPH)
• ప్రత్యేక ఫీచర్: ఆటో షట్-ఆఫ్ పంప్
• UPC: 728990744574

Figure 6: Diagram illustrating the dimensions of the 51-inch tall XBrand 3-Tier Water Fountain.

9. వారంటీ మరియు మద్దతు

XBrand products are manufactured with quality and durability in mind. For specific warranty information or technical support, please refer to the warranty card included with your purchase or visit the official XBrand webసైట్. ఏవైనా వారంటీ క్లెయిమ్‌లకు కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

For further assistance, please contact XBrand customer service.